Abstract: A personal estimate of a health risk may not
correspond to a scientific assessment of the health risk. Hence, there
is a need to investigate perceived health risks in the public. In this
study, a young, educated and healthy group of people from a tertiary
institute were questioned about their health concerns. Ethics
clearance was obtained and data was collected by means of a
questionnaire. 362 students participated in the study. Tobacco use,
heavy alcohol drinking, illicit drugs, unsafe sex and potential
carcinogens were perceived to be the five greatest threats to health in
this cohort. On the other hand natural health products,
unemployment, unmet contraceptive needs, family violence and
homelessness were felt to be the least perceived health risks.
Nutrition-related health risks as well as health risks due to physical
inactivity and obesity were not perceived as major health threats.
Such a study of health perceptions may guide health promotion
campaigns.
Abstract: Radiofrequency (RF) lesioning of nerves have been commonly used to alleviate chronic pain, where RF current preventing transmission of pain signals through the nerve by heating the nerve causing the pain. There are some factors that affect the temperature distribution and the nerve lesion size, one of these factors is the inhomogeneities in the tissue medium. Our objective is to calculate the temperature distribution and the nerve lesion size in an inhomogeneous medium surrounding the RF electrode. A two 3-D finite element models are used to compare the temperature distribution in the homogeneous and inhomogeneous medium. Also the effect of temperature-dependent electric conductivity on maximum temperature and lesion size is observed. Results show that the presence of an inhomogeneous medium around the RF electrode has a valuable effect on the temperature distribution and lesion size. The dependency of electric conductivity on tissue temperature increased lesion size.
Abstract: In Mauritius, much emphasis is put on measures to
combat the high prevalence of non-communicable diseases (NCDs).
Health promotion campaigns for the adoption of healthy behaviors
and screening programs are done regularly by local authorities and
NCD surveys are carried out at intervals. However, the health
behaviors of the poor have not been investigated so far. This study
aims to give an insight on the perceptions of health status and
lifestyle health behaviors of poor people in Mauritius. A crosssectional
study among 83 persons benefiting from social aid in a
selected urban district was carried out. Results showed that 51.8% of
respondents perceived that they had good health status. 57.8% had no
known NCD whilst 25.3% had hypertension, followed by diabetes
(16.9%), asthma (9.6%) and heart disease (7.2%).They had low
smoking (10.8%) and alcohol consumption (6.0%) as well as high
physical activity prevalence (54.2%). These results were significantly
different from the NCD survey carried out in the general population.
Consumption of vegetables in the study was high. Overweight and
obesity trends were however similar to the NCD survey report 2009.
These findings contrast with other international studies showing poor
people having poor perceptions of health status and unhealthy
behavioral choices. Whether these positive health behaviors of poor
people in Mauritius arise out of choice or whether it is because the
alternative behavior is too costly remains to be investigated further.
Abstract: Negation is useful in the majority of the real world applications. However, its introduction leads to semantic and canonical problems. We propose in this paper an approach based on stratification to deal with negation problems. This approach is based on an extension of predicates nets. It is characterized with two main contributions. The first concerns the management of the whole class of stratified programs. The second contribution is related to usual operations optimizations on stratified programs (maximal stratification, incremental updates ...).
Abstract: A novel file splitting technique for the reduction of the nth-order entropy of text files is proposed. The technique is based on mapping the original text file into a non-ASCII binary file using a new codeword assignment method and then the resulting binary file is split into several subfiles each contains one or more bits from each codeword of the mapped binary file. The statistical properties of the subfiles are studied and it is found that they reflect the statistical properties of the original text file which is not the case when the ASCII code is used as a mapper. The nth-order entropy of these subfiles are determined and it is found that the sum of their entropies is less than that of the original text file for the same values of extensions. These interesting statistical properties of the resulting subfiles can be used to achieve better compression ratios when conventional compression techniques are applied to these subfiles individually and on a bit-wise basis rather than on character-wise basis.
Abstract: Pattern matching based on regular tree grammars have been widely used in many areas of computer science. In this paper, we propose a pattern matcher within the framework of code generation, based on a generic and a formalized approach. According to this approach, parsers for regular tree grammars are adapted to a general pattern matching solution, rather than adapting the pattern matching according to their parsing behavior. Hence, we first formalize the construction of the pattern matches respective to input trees drawn from a regular tree grammar in a form of the so-called match trees. Then, we adopt a recently developed generic parser and tightly couple its parsing behavior with such construction. In addition to its generality, the resulting pattern matcher is characterized by its soundness and efficient implementation. This is demonstrated by the proposed theory and by the derived algorithms for its implementation. A comparison with similar and well-known approaches, such as the ones based on tree automata and LR parsers, has shown that our pattern matcher can be applied to a broader class of grammars, and achieves better approximation of pattern matches in one pass. Furthermore, its use as a machine code selector is characterized by a minimized overhead, due to the balanced distribution of the cost computations into static ones, during parser generation time, and into dynamic ones, during parsing time.
Abstract: A combination of photosynthetic bacteria along with
anaerobic acidogenic bacteria is an ideal option for efficient
hydrogen production. In the present study, the optimum
concentration of substrates for the growth of Rhodobacter
sphaeroides was found by response surface methodology. The
optimum combination of three individual fatty acids was determined
by Box Behnken design. Increase of volatile fatty acid concentration
decreased the growth. Combination of sodium acetate and sodium
propionate was most significant for the growth of the organism. The
results showed that a maximum biomass concentration of 0.916 g/l
was obtained when the concentrations of acetate, propionate and
butyrate were 0.73g/l,0.99g/l and 0.799g/l, respectively. The growth
was studied under an optimum concentration of volatile fatty acids
and at a light intensity of 3000 lux, initial pH of 7 and a temperature
of 35°C.The maximum biomass concentration of 0.92g/l was
obtained which verified the practicability of this optimization.
Abstract: In this paper, the process of obtaining Q and R
matrices for optimal pitch aircraft control system has been described.
Since the innovation of optimal control method, the determination of
Q and R matrices for such system has not been fully specified. The
value of Q and R for optimal pitch aircraft control application, have
been simulated and calculated. The suitable results for Q and R have
been observed through the performance index (PI). If the PI is small
“enough", we would say the Q & R values are suitable for that
certain type of optimal control system. Moreover, for the same value
of PI, we could have different Q and R sets. Due to the rule-free
determination of Q and R matrices, a specific method is brought to
find out the rough value of Q and R referring to rather small value of
PI.
Abstract: When earthquakes strike the city it results in great loss of lives. The present paper talks about a new innovative design system (MegEifel) for buildings which has a mechanism to mitigate deaths in case any earthquake strikes the city. If buildings will be designed according to MegEifel design then the occupants of the building will be safe even when they are in sleep or are doing day wise activities during the time earthquake strikes. The core structure is suggested to be designed on the principle that more deep the foundations are, the harder it is to uproot the structure. The buildings will have an Eifel rod dug deep into earth which will help save lives in tall buildings when earthquake strikes. This design takes a leverage of protective shells to save lives.
Abstract: The problem of wastewater treatment in Egypt is a two-fold problem; the first part concerning the existing rural areas, the second one dealing with new industrial/domestic areas. In Egypt several agricultural projects have been initiated by the government and the private sector as well, in order to change its infrastructure. As a reliable energy source, photovoltaic pumping systems have contributed to supply water for local rural communities worldwide; they can also be implemented to solve the problem “wastewater environment pollution". The solution of this problem can be categorised as recycle process. In addition, because of regional conditions past technologies are being reexamined to select a smallscale treatment system requiring low construction and maintenance costs. This paper gives the design guidelines of a Photovoltaic Small- Scale Wastewater Treatment Plant (PVSSWTP) based on technologies that can be transferred.
Abstract: Network coding has recently attracted attention as an efficient technique in multicast/broadcast services. The problem of finding the optimal network coding mechanism maximizing the bandwidth efficiency is hard to solve and hard to approximate. Lots of network coding-based schemes have been suggested in the literature to improve the bandwidth efficiency, especially network coding-based automatic repeat request (NCARQ) schemes. However, existing schemes have several limitations which cause the performance degradation in resource limited systems. To improve the performance in resource limited systems, we propose NCARQ with overlapping selection (OS-NCARQ) scheme. The advantages of OS-NCARQ scheme over the traditional ARQ scheme and existing NCARQ schemes are shown through the analysis and simulations.
Abstract: CloudSim is a useful tool to simulate the cloud
environment. It shows the service availability, the power consumption,
and the network traffic of services on the cloud environment.
Moreover, it supports to calculate a network communication delay
through a network topology data easily. CloudSim allows inputting a
file of topology data, but it does not provide any generating process.
Thus, it needs the file of topology data generated from some other
tools. The BRITE is typical network topology generator. Also, it
supports various type of topology generating algorithms. If CloudSim
can include the BRITE, network simulation for clouds is easier than
existing version. This paper shows the potential of connection between
BRITE and CloudSim. Also, it proposes the direction to link between
them.
Abstract: The machining performance is determined by the
frequency characteristics of the machine-tool structure and the
dynamics of the cutting process. Therefore, the prediction of dynamic
vibration behavior of spindle tool system is of great importance for the
design of a machine tool capable of high-precision and high-speed
machining. The aim of this study is to develop a finite element model
to predict the dynamic characteristics of milling machine tool and
hence evaluate the influence of the preload of the spindle bearings. To
this purpose, a three dimensional spindle bearing model of a high
speed engraving spindle tool was created. In this model, the rolling
interfaces with contact stiffness defined by Harris model were used to
simulate the spindle bearing components. Then a full finite element
model of a vertical milling machine was established by coupling the
spindle tool unit with the machine frame structure. Using this model,
the vibration mode that had a dominant influence on the dynamic
stiffness was determined. The results of the finite element simulations
reveal that spindle bearing with different preloads greatly affect the
dynamic behavior of the spindle tool unit and hence the dynamic
responses of the vertical column milling system. These results were
validated by performing vibration on the individual spindle tool unit
and the milling machine prototype, respectively. We conclude that
preload of the spindle bearings is an important component affecting
the dynamic characteristics and machining performance of the entire
vertical column structure of the milling machine.
Abstract: An upwind difference approximation is used for a singularly perturbed problem in material science. Based on the discrete Green-s function theory, the error estimate in maximum norm is achieved, which is first-order uniformly convergent with respect to the perturbation parameter. The numerical experimental result is verified the valid of the theoretical analysis.
Abstract: To support mobility in ATM networks, a number of
technical challenges need to be resolved. The impact of handoff
schemes in terms of service disruption, handoff latency, cost
implications and excess resources required during handoffs needs to
be addressed. In this paper, a one phase handoff and route
optimization solution using reserved PVCs between adjacent ATM
switches to reroute connections during inter-switch handoff is
studied. In the second phase, a distributed optimization process is
initiated to optimally reroute handoff connections. The main
objective is to find the optimal operating point at which to perform
optimization subject to cost constraint with the purpose of reducing
blocking probability of inter-switch handoff calls for delay tolerant
traffic. We examine the relation between the required bandwidth
resources and optimization rate. Also we calculate and study the
handoff blocking probability due to lack of bandwidth for resources
reserved to facilitate the rapid rerouting.
Abstract: This work involved the use of phytoremediation to
remediate an aged soil contaminated with polychlorinated biphenyls
(PCBs). At microcosm scale, tests were prepared using soil samples
that have been collected in an industrial area with a total PCBs
concentration of about 250 μg kg-1. Medicago sativa and Lolium
italicum were the species selected in this study that is used as
“feasibility test" for full scale remediation. The experiment was
carried out with the addition of a mixture of randomly methylatedbeta-
cyclodextrins (RAMEB). At the end of the experiment analysis
of soil samples showed that in general the presence of plants has led
to a higher degradation of most congeners with respect to not
vegetated soil. The two plant species efficiencies were comparable
and improved by RAMEB addition with a final reduction of total
PCBs near to 50%. With increasing the chlorination of the congeners
the removal percentage of PCBs progressively decreased.
Abstract: This paper presents a new hardware interface using a
microcontroller which processes audio music signals to standard
MIDI data. A technique for processing music signals by extracting
note parameters from music signals is described. An algorithm to
convert the voice samples for real-time processing without complex
calculations is proposed. A high frequency microcontroller as the
main processor is deployed to execute the outlined algorithm. The
MIDI data generated is transmitted using the EIA-232 protocol. The
analyses of data generated show the feasibility of using
microcontrollers for real-time MIDI generation hardware interface.
Abstract: This article is devoted to the numerical solution of
large-scale quadratic eigenvalue problems. Such problems arise in
a wide variety of applications, such as the dynamic analysis of
structural mechanical systems, acoustic systems, fluid mechanics,
and signal processing. We first introduce a generalized second-order
Krylov subspace based on a pair of square matrices and two initial
vectors and present a generalized second-order Arnoldi process for
constructing an orthonormal basis of the generalized second-order
Krylov subspace. Then, by using the projection technique and the
refined projection technique, we propose a restarted generalized
second-order Arnoldi method and a restarted refined generalized
second-order Arnoldi method for computing some eigenpairs of largescale
quadratic eigenvalue problems. Some theoretical results are also
presented. Some numerical examples are presented to illustrate the
effectiveness of the proposed methods.
Abstract: Efforts to secure supervisory control and data acquisition
(SCADA) systems must be supported under the guidance of
sound security policies and mechanisms to enforce them. Critical
elements of the policy must be systematically translated into a format
that can be used by policy enforcement components. Ideally, the
goal is to ensure that the enforced policy is a close reflection of
the specified policy. However, security controls commonly used to
enforce policies in the IT environment were not designed to satisfy
the specific needs of the SCADA environment. This paper presents
a language, based on the well-known XACML framework, for the
expression of authorization policies for SCADA systems.
Abstract: This paper presents an overview of the design and
implementation of an online rule-based Expert Systems for Islamic
medication. T his Online Islamic Medication Expert System (OIMES)
focuses on physical illnesses only. Knowledge base of this Expert
System contains exhaustively the types of illness together with their
related cures or treatments/therapies, obtained exclusively from the
Quran and Hadith. Extensive research and study are conducted to
ensure that the Expert System is able to provide the most suitable
treatment with reference to the relevant verses cited in Quran or
Hadith. These verses come together with their related 'actions'
(bodily actions/gestures or some acts) to be performed by the patient
to treat a particular illness/sickness. These verses and the instructions
for the 'actions' are to be displayed unambiguously on the computer
screen. The online platform provides the advantage for patient getting
treatment practically anytime and anywhere as long as the computer
and Internet facility exist. Patient does not need to make appointment
to see an expert for a therapy.