Abstract: In this paper a new cost function for blind equalization
is proposed. The proposed cost function, referred to as the modified
maximum normalized cumulant criterion (MMNC), is an extension
of the previously proposed maximum normalized cumulant criterion
(MNC). While the MNC requires a separate phase recovery system
after blind equalization, the MMNC performs joint blind equalization
and phase recovery. To achieve this, the proposed algorithm
maximizes a cost function that considers both amplitude and phase of
the equalizer output. The simulation results show that the proposed
algorithm has an improved channel equalization effect than the MNC
algorithm and simultaneously can correct the phase error that the
MNC algorithm is unable to do. The simulation results also show that
the MMNC algorithm has lower complexity than the MNC algorithm.
Moreover, the MMNC algorithm outperforms the MNC algorithm
particularly when the symbols block size is small.
Abstract: Three-phase induction machines are today a standard
for industrial electrical drives. Cost, reliability, robustness and maintenance free operation are among the reasons these machines are
replacing dc drive systems. The development of power electronics
and signal processing systems has eliminated one of the greatest
disadvantages of such ac systems, which is the issue of control. With
modern techniques of field oriented vector control, the task of
variable speed control of induction machines is no longer a
disadvantage. The need to increase system performance, particularly
when facing limits on the power ratings of power supplies and
semiconductors, motivates the use of phase number other than three,
In this paper a novel scheme of connecting two, three phase
induction motors in parallel fed by two inverters; viz. VSI and CSI
and their vector control is presented.
Abstract: Trust management is one of the drawbacks in Peer-to-Peer (P2P) system. Lack of centralized control makes it difficult to control the behavior of the peers. Reputation system is one approach to provide trust assessment in P2P system. In this paper, we use fuzzy logic to model trust in a P2P environment. Our trust model combines first-hand (direct experience) and second-hand (reputation)information to allow peers to represent and reason with uncertainty regarding other peers' trustworthiness. Fuzzy logic can help in handling the imprecise nature and uncertainty of trust. Linguistic labels are used to enable peers assign a trust level intuitively. Our fuzzy trust model is flexible such that inference rules are used to weight first-hand and second-hand accordingly.
Abstract: In this paper, we propose APO, a new packet scheduling
scheme with Quality of Service (QoS) support for hybrid of
real and non-real time services in HSDPA networks. The APO
scheduling algorithm is based on the effective channel anticipation
model. In contrast to the traditional schemes, the proposed method is
implemented based on a cyclic non-work-conserving discipline.
Simulation results indicated that proposed scheme has good
capability to maximize the channel usage efficiency in compared to
another exist scheduling methods. Simulation results demonstrate the
effectiveness of the proposed algorithm.
Abstract: Efficient and safe plant operation can only be
achieved if the operators are able to monitor all key process
parameters. Instrumentation is used to measure many process
variables, like temperatures, pressures, flow rates, compositions or
other product properties. Therefore Performance monitoring is a
suitable tool for operators. In this paper, we integrate rigorous
simulation model, data reconciliation and parameter estimation to
monitor process equipments and determine key performance
indicator (KPI) of them. The applied method here has been
implemented in two case studies.
Abstract: Anodizing is an electrochemical process that converts the metal surface into a decorative, durable, corrosion-resistant, anodic oxide finish. Aluminum is ideally suited to anodizing, although other nonferrous metals, such as magnesium and titanium, also can be anodized. The anodic oxide structure originates from the aluminum substrate and is composed entirely of aluminum oxide. This aluminum oxide is not applied to the surface like paint or plating, but is fully integrated with the underlying aluminum substrate, so cannot chip or peel. It has a highly ordered, porous structure that allows for secondary processes such as coloring and sealing. In this experimental paper, we focus on a reliable method for fabricating nanoporous alumina with high regularity. Starting from study of nanostructure materials synthesize methods. After that, porous alumina fabricate in the laboratory by anodization of aluminum oxide. Hard anodization processes are employed to fabricate the nanoporous alumina using 0.3M oxalic acid and 90, 120 and 140 anodized voltages. The nanoporous templates were characterized by SEM and FFT. The nanoporous templates using 140 voltages have high ordered. The pore formation, influence of the experimental conditions on the pore formation, the structural characteristics of the pore and the oxide chemical reactions involved in the pore growth are discuss.
Abstract: Solution of some practical problems is reduced to the
solution of the integro-differential equations. But for the numerical
solution of such equations basically quadrature methods or its
combination with multistep or one-step methods are used. The
quadrature methods basically is applied to calculation of the integral
participating in right hand side of integro-differential equations. As
this integral is of Volterra type, it is obvious that at replacement with
its integrated sum the upper limit of the sum depends on a current
point in which values of the integral are defined. Thus we receive the
integrated sum with variable boundary, to work with is hardly.
Therefore multistep method with the constant coefficients, which is
free from noted lack and gives the way for finding it-s coefficients is
present.
Abstract: The most common cause of power transformer failures
is mechanical defect brought about by excessive vibration, which is
formed by the combination of multiples of a frequency of 120 Hz. In
this paper, the types of mechanical exciting forces applied to the
power transformer were classified, and the mechanical damage
mechanism of the power transformer was identified using the
vibration transfer route to the machine or structure. The general
effects of 120 Hz-vibration on the enclosure, bushing, Buchholz
relay, pressure release valve and tap changer of the transformer were
also examined.
Abstract: The effect of nano Co3O4 addition on the
superconducting properties of (Bi, Pb)-2223 system was studied. The
samples were prepared by the acetate coprecipitation method. The
Co3O4 with different sizes (10-30 nm and 30-50 nm) from x=0.00 to
0.05 was added to Bi1.6Pb0.4Sr2Ca2Cu3Oy(Co3O4)x. Phase analysis by
XRD method, microstructural examination by SEM and dc electrical
resistivity by four point probe method were done to characterize the
samples. The X-ray diffraction patterns of all the samples indicated
the majority Bi-2223 phase along with minor Bi-2212 and Bi-2201
phases. The volume fraction was estimated from the intensities of Bi-
2223, Bi-2212 and Bi-2201 phase. The sample with x=0.01 wt% of
the added Co3O4 (10-30 nm size) showed the highest volume fraction
of Bi-2223 phase (72%) and the highest superconducting transition
temperature, Tc (~102 K). The non-added sample showed the highest
Tc(~103 K) compared to added samples with nano Co3O4 (30-50 nm
size) added samples. Both the onset critical temperature Tc(onset)
and zero electrical resistivity temperature Tc(R=0) were in the range
of 103-115 ±1K and 91-103 ±1K respectively for samples with added
Co3O4 (10-30 nm and 30-50 nm).
Abstract: Most agricultural crops cultivated in Brazil are highly
nutrient demanding. Brazilian soils are generally acidic with low base
saturation and available nutrients. Demand for fertilizer application
has increased because the national agricultural sector expansion. To
improve productivity without environmental impact, there is the need
for the utilization of novel procedures and techniques to optimize
fertilizer application. This includes the digital soil mapping and GIS
application applied to mapping in different scales. This paper is
based on research, realized during 2005 to 2010 by Brazilian
Corporation for Agricultural Research (EMBRAPA) and its partners.
The purpose was to map soil fertility in national and regional scales.
A soil profile data set in national scale (1:5,000,000) was constructed
from the soil archives of Embrapa Soils, Rio de Janeiro and in the
regional scale (1:250,000) from COMIGO Cooperative soil data set,
Rio Verde, Brazil. The mapping was doing using ArcGIS 9.1 tools
from ESRI.
Abstract: The relation between taxation states and foreign direct
investment has been studied for several perspectives and with states
of different levels of development. Usually it's only considered the
impact of tax level on the foreign direct investment volume. This
paper enhances this view by assuming that multinationals companies
(MNC) can use transfer prices systems and have got investment
timing flexibility. Thus, it evaluates the impact of the use of
international transfer pricing systems on the states- policy and on the
investment timing of the multinational companies. In uncertain
business environments (with periodical release of news), the
investment can increase if MNC detain investment delay options.
This paper shows how tax differentials can attract foreign direct
investments (FDI) and influence MNC behavior. The equilibrium is
set in a global environment where MNC can shift their profits
between states depending on the corporate tax rates. Assuming the
use of transfer pricing schemes, this paper confirms the relationship
between MNC behavior and the release of new business news.
Abstract: We constructed a method of noise reduction for
JPEG-compressed image based on Bayesian inference using the
maximizer of the posterior marginal (MPM) estimate. In this method,
we tried the MPM estimate using two kinds of likelihood, both of
which enhance grayscale images converted into the JPEG-compressed
image through the lossy JPEG image compression. One is the
deterministic model of the likelihood and the other is the probabilistic
one expressed by the Gaussian distribution. Then, using the Monte
Carlo simulation for grayscale images, such as the 256-grayscale
standard image “Lena" with 256 × 256 pixels, we examined the
performance of the MPM estimate based on the performance measure
using the mean square error. We clarified that the MPM estimate via
the Gaussian probabilistic model of the likelihood is effective for
reducing noises, such as the blocking artifacts and the mosquito noise,
if we set parameters appropriately. On the other hand, we found that
the MPM estimate via the deterministic model of the likelihood is not
effective for noise reduction due to the low acceptance ratio of the
Metropolis algorithm.
Abstract: The given work is devoted to the description of
Information Technologies NAS of Azerbaijan created and
successfully maintained in Institute. On the basis of the decision of
board of the Supreme Certifying commission at the President of the
Azerbaijan Republic and Presidium of National Academy of
Sciences of the Azerbaijan Republic, the organization of training
courses on Computer Sciences for all post-graduate students and
dissertators of the republic, taking of examinations of candidate
minima, it was on-line entrusted to Institute of Information
Technologies of the National Academy of Sciences of Azerbaijan.
Therefore, teaching the computer sciences to post-graduate
students and dissertators a scientific - methodological manual on
effective application of new information technologies for research
works by post-graduate students and dissertators and taking of
candidate minima is carried out in the Educational Center.
Information and communication technologies offer new
opportunities and prospects of their application for teaching and
training. The new level of literacy demands creation of essentially
new technology of obtaining of scientific knowledge. Methods of
training and development, social and professional requirements,
globalization of the communicative economic and political projects
connected with construction of a new society, depends on a level of
application of information and communication technologies in the
educational process. Computer technologies develop ideas of
programmed training, open completely new, not investigated
technological ways of training connected to unique opportunities of
modern computers and telecommunications. Computer technologies
of training are processes of preparation and transfer of the
information to the trainee by means of computer. Scientific and
technical progress as well as global spread of the technologies
created in the most developed countries of the world is the main
proof of the leading role of education in XXI century. Information
society needs individuals having modern knowledge. In practice, all
technologies, using special technical information means (computer,
audio, video) are called information technologies of education.
Abstract: This study examined the effects of 8-week Pilates training program on limits of stability (LOS) and abdominal muscle strength in young dancers. Twenty-four female volunteered and randomly assigned as experimental group (EG) or control group (CG). All subjects received the same dance lessons but the EG underwent an extra Pilates mat exercises for 40 minutes, three times a week, for 8 weeks. LOS was evaluated by the Biodex Balance System and the abdominal strength was measured by 30/60 seconds sit-ups test. One factor ANCOVA was used to examine the differences between groups after training. The results showed that the overall LOS scores at levels 2/8 and the 30/60 seconds sit-ups for the EG group pre- and post-training were changed from 22/38 % to 31/51 % and 20/33 times to 24/42 times, respectively. The study demonstrated that 8-week Pilates training can improve the LOS performance and abdominal strength in young dancers.
Abstract: Construction project control attempts to obtain real-time information and effectively enhance dynamic control and management via information sharing and analysis among project participants to eliminate construction conflicts and project delays. However, survey results for Taiwan indicate that construction commercial project management software is not widely accepted for subcontractors and suppliers. To solve the project communications problems among participants, this study presents a novel system called the Construction Dynamic Teams Communication Management (Con-DTCM) system for small-to-medium sized subcontractors and suppliers in Taiwanese Construction industry, and demonstrates that the Con-DTCM system responds to the most recent project information efficiently and enhances management of project teams (general contractor, suppliers and subcontractors) through web-based environment. Web-based technology effectively enhances information sharing during construction project management, and generates cost savings via the Internet. The main unique characteristic of the proposed Con-DTCM system is extremely user friendly and easily design compared with current commercial project management applications. The Con-DTCM system is applied to a case study of construction of a building project in Taiwan to confirm the proposed methodology and demonstrate the effectiveness of information sharing during the construction phase. The advantages of the Con-DTCM system are in improving project control and management efficiency for general contractors, and in providing dynamic project tracking and management, which enables subcontractors and suppliers to acquire the most recent project-related information. Furthermore, this study presents and implements a generic system architecture.
Abstract: Most integrated inertial navigation systems (INS) and
global positioning systems (GPS) have been implemented using the
Kalman filtering technique with its drawbacks related to the need for
predefined INS error model and observability of at least four
satellites. Most recently, a method using a hybrid-adaptive network
based fuzzy inference system (ANFIS) has been proposed which is
trained during the availability of GPS signal to map the error
between the GPS and the INS. Then it will be used to predict the
error of the INS position components during GPS signal blockage.
This paper introduces a genetic optimization algorithm that is used to
update the ANFIS parameters with respect to the INS/GPS error
function used as the objective function to be minimized. The results
demonstrate the advantages of the genetically optimized ANFIS for
INS/GPS integration in comparison with conventional ANFIS
specially in the cases of satellites- outages. Coping with this problem
plays an important role in assessment of the fusion approach in land
navigation.
Abstract: The comparative analysis of different taxonomic
groups of microorganisms isolated from dark chernozem soils under
different agricultures (alfalfa, melilot, sainfoin, soybean, rapeseed) at
Almaty region of Kazakhstan was conducted. It was shown that the
greatest number of micromycetes was typical to the soil planted with
alfalfa and canola. Species diversity of micromycetes markedly
decreases as it approaches the surface of the root, so that the species
composition in the rhizosphere is much more uniform than in the
virgin soil. Promising strains of microscopic fungi and yeast with
plant growth-promoting activity to agricultures were selected. Among
the selected fungi there are representatives of Penicillium bilaiae,
Trichoderma koningii, Fusarium equiseti, Aspergillus ustus. The
highest rates of growth and development of seedlings of plants
observed under the influence of yeasts Aureobasidium pullulans,
Rhodotorula mucilaginosa, Metschnikovia pulcherrima. Using
molecular - genetic techniques confirmation of the identification
results of selected micromycetes was conducted.
Abstract: The studies concerned an effect of six variants of ion
exchange substrate (nutrient carriers with a different potential impact
on pH of soil solution) on vegetation of orchard grass during two
different periods (42 and 84 days). In the pot experiment plants were
grown on sand (model of degraded soil) and six mixtures of sand and
2% (v/v) additions of particular variants of ion exchange substrate
(with pH ranged from 5.5 to 8.0). The study results showed that the
addition of the substrate at pH=6.5 caused the highest increase in
plant yield after shorter vegetation period whereas the addition of the
substrate at pH=5.5 increased dry stem and root biomass of orchard
grass after longer vegetation period. Thus, the ion exchange substrate
at pH=6.5 can be recommended for restoration of exhausted soils
when shorter vegetation period is planned; the ion exchange substrate
at pH=5.5 can be used for the same purpose when longer periods of
vegetative growth are considered.
Abstract: Automated discovery of Rule is, due to its applicability, one of the most fundamental and important method in KDD. It has been an active research area in the recent past. Hierarchical representation allows us to easily manage the complexity of knowledge, to view the knowledge at different levels of details, and to focus our attention on the interesting aspects only. One of such efficient and easy to understand systems is Hierarchical Production rule (HPRs) system. A HPR, a standard production rule augmented with generality and specificity information, is of the following form: Decision If < condition> Generality Specificity . HPRs systems are capable of handling taxonomical structures inherent in the knowledge about the real world. This paper focuses on the issue of mining Quantified rules with crisp hierarchical structure using Genetic Programming (GP) approach to knowledge discovery. The post-processing scheme presented in this work uses Quantified production rules as initial individuals of GP and discovers hierarchical structure. In proposed approach rules are quantified by using Dempster Shafer theory. Suitable genetic operators are proposed for the suggested encoding. Based on the Subsumption Matrix(SM), an appropriate fitness function is suggested. Finally, Quantified Hierarchical Production Rules (HPRs) are generated from the discovered hierarchy, using Dempster Shafer theory. Experimental results are presented to demonstrate the performance of the proposed algorithm.
Abstract: Like any sentient organism, a smart environment
relies first and foremost on sensory data captured from the real
world. The sensory data come from sensor nodes of different
modalities deployed on different locations forming a Wireless Sensor
Network (WSN). Embedding smart sensors in humans has been a
research challenge due to the limitations imposed by these sensors
from computational capabilities to limited power. In this paper, we
first propose a practical WSN application that will enable blind
people to see what their neighboring partners can see. The challenge
is that the actual mapping between the input images to brain pattern
is too complex and not well understood. We also study the
connectivity problem in 3D/2D wireless sensor networks and propose
distributed efficient algorithms to accomplish the required
connectivity of the system. We provide a new connectivity algorithm
CDCA to connect disconnected parts of a network using cooperative
diversity. Through simulations, we analyze the connectivity gains
and energy savings provided by this novel form of cooperative
diversity in WSNs.