Abstract: A synchronous network-on-chip using wormhole packet switching
and supporting guaranteed-completion best-effort with low-priority (LP)
and high-priority (HP) wormhole packet delivery service is presented in
this paper. Both our proposed LP and HP message services deliver a good
quality of service in term of lossless packet completion and in-order message
data delivery. However, the LP message service does not guarantee minimal
completion bound. The HP packets will absolutely use 100% bandwidth of
their reserved links if the HP packets are injected from the source node with
maximum injection. Hence, the service are suitable for small size messages
(less than hundred bytes). Otherwise the other HP and LP messages, which
require also the links, will experience relatively high latency depending on the
size of the HP message. The LP packets are routed using a minimal adaptive
routing, while the HP packets are routed using a non-minimal adaptive routing
algorithm. Therefore, an additional 3-bit field, identifying the packet type,
is introduced in their packet headers to classify and to determine the type
of service committed to the packet. Our NoC prototypes have been also
synthesized using a 180-nm CMOS standard-cell technology to evaluate the
cost of implementing the combination of both services.
Abstract: Computer based geostatistical methods can offer effective data analysis possibilities for agricultural areas by using
vectorial data and their objective informations. These methods will help to detect the spatial changes on different locations of the large
agricultural lands, which will lead to effective fertilization for optimal yield with reduced environmental pollution. In this study, topsoil (0-20 cm) and subsoil (20-40 cm) samples were taken from a
sugar beet field by 20 x 20 m grids. Plant samples were also collected
from the same plots. Some physical and chemical analyses for these
samples were made by routine methods. According to derived variation coefficients, topsoil organic matter (OM) distribution was more than subsoil OM distribution. The highest C.V. value of
17.79% was found for topsoil OM. The data were analyzed
comparatively according to kriging methods which are also used
widely in geostatistic. Several interpolation methods (Ordinary,Simple and Universal) and semivariogram models (Spherical,
Exponential and Gaussian) were tested in order to choose the suitable
methods. Average standard deviations of values estimated by simple
kriging interpolation method were less than average standard
deviations (topsoil OM ± 0.48, N ± 0.37, subsoil OM ± 0.18) of measured values. The most suitable interpolation method was simple
kriging method and exponantial semivariogram model for topsoil,
whereas the best optimal interpolation method was simple kriging
method and spherical semivariogram model for subsoil. The results
also showed that these computer based geostatistical methods should
be tested and calibrated for different experimental conditions and semivariogram models.
Abstract: XML is an important standard of data exchange and
representation. As a mature database system, using relational database
to support XML data may bring some advantages. But storing XML in
relational database has obvious redundancy that wastes disk space,
bandwidth and disk I/O when querying XML data. For the efficiency
of storage and query XML, it is necessary to use compressed XML
data in relational database. In this paper, a compressed relational
database technology supporting XML data is presented. Original
relational storage structure is adaptive to XPath query process. The
compression method keeps this feature. Besides traditional relational
database techniques, additional query process technologies on
compressed relations and for special structure for XML are presented.
In this paper, technologies for XQuery process in compressed
relational database are presented..
Abstract: This paper aims to improve a fine lapping process of
hard disk drive (HDD) lapping machines by removing materials from
each slider together with controlling the strip height (SH) variation to
minimum value. The standard deviation is the key parameter to
evaluate the strip height variation, hence it is minimized. In this
paper, a design of experiment (DOE) with factorial analysis by twoway
analysis of variance (ANOVA) is adopted to obtain a
statistically information. The statistics results reveal that initial stripe
height patterns affect the final SH variation. Therefore, initial SH
classification using a radial basis function neural network is
implemented to achieve the proportional gain prediction.
Abstract: During the last few years, several sheet hydroforming
processes have been introduced. Despite the advantages of these
methods, they have some limitations. Of the processes, the two main
ones are the standard hydroforming and hydromechanical deep
drawing. A new sheet hydroforming die set was proposed that has the
advantages of both processes and eliminates their limitations. In this
method, a polyurethane plate was used as a part of the die-set to
control the blank holder force. This paper outlines the Taguchi
optimization methodology, which is applied to optimize the effective
parameters in forming cylindrical cups by the new die set of sheet
hydroforming process. The process parameters evaluated in this
research are polyurethane hardness, polyurethane thickness, forming
pressure path and polyurethane hole diameter. The design of
experiments based upon L9 orthogonal arrays by Taguchi was used
and analysis of variance (ANOVA) was employed to analyze the
effect of these parameters on the forming pressure. The analysis of
the results showed that the optimal combination for low forming
pressure is harder polyurethane, bigger diameter of polyurethane hole
and thinner polyurethane. Finally, the confirmation test was derived
based on the optimal combination of parameters and it was shown
that the Taguchi method is suitable to examine the optimization
process.
Abstract: ebXML (Electronic Business using eXtensible
Markup Language) is an e-business standard, sponsored by
UN/CEFACT and OASIS, which enables enterprises to exchange
business messages, conduct trading relationships, communicate
data in common terms and define and register business
processes. While there is tremendous e-business value in the
ebXML, security remains an unsolved problem and one of the
largest barriers to adoption. XML security technologies emerging
recently have extensibility and flexibility suitable for security
implementation such as encryption, digital signature, access
control and authentication.
In this paper, we propose ebXML business transaction models
that allow trading partners to securely exchange XML based
business transactions by employing XML security technologies.
We show how each XML security technology meets the ebXML
standard by constructing the test software and validating messages
between the trading partners.
Abstract: This paper investigates the fractals generated by the dynamical system of intuitionistic fuzzy contractions in the intuitionistic
fuzzy metric spaces by generalizing the Hutchinson-Barnsley theory. We prove some existence and uniqueness theorems of fractals in the
standard intuitionistic fuzzy metric spaces by using the intuitionistic fuzzy Banach contraction theorem. In addition to that, we analyze
some results on intuitionistic fuzzy fractals in the standard intuitionistic fuzzy metric spaces with respect to the Hausdorff intuitionistic
fuzzy metrics.
Abstract: Shirvan is located in plain in Northern Khorasan province north east of Iran and has semiarid to temperate climate. To investigate the annual changes in some qualitative parameters such as electrical conductivity, total dissolved solids and chloride concentrations which have increased during ten continuous years. Fourteen groundwater sources including deep as well as semi-deep wells were sampled and were analyzed using standard methods. The trends of obtained data were analyzed during these years and the effects of different factors on the changes in electrical conductivity, concentration of chloride and total dissolved solids were clarified. The results showed that the amounts of some qualitative parameters have been increased during 10 years time which has led to decrease in water quality. The results also showed that increased in urban populations as well as extensive industrialization in the studied area are the most important reasons to influence underground water quality. Furthermore decrease in water quantity is also evident due to more water utilization and occurrence of recent droughts in the region during recent years.
Abstract: Combining classifiers is a useful method for solving
complex problems in machine learning. The ECOC (Error Correcting
Output Codes) method has been widely used for designing combining
classifiers with an emphasis on the diversity of classifiers. In this
paper, in contrast to the standard ECOC approach in which individual
classifiers are chosen homogeneously, classifiers are selected
according to the complexity of the corresponding binary problem. We
use SATIMAGE database (containing 6 classes) for our experiments.
The recognition error rate in our proposed method is %10.37 which
indicates a considerable improvement in comparison with the
conventional ECOC and stack generalization methods.
Abstract: XML is becoming a de facto standard for online data exchange. Existing XML filtering techniques based on a publish/subscribe model are focused on the highly structured data marked up with XML tags. These techniques are efficient in filtering the documents of data-centric XML but are not effective in filtering the element contents of the document-centric XML. In this paper, we propose an extended XPath specification which includes a special matching character '%' used in the LIKE operation of SQL in order to solve the difficulty of writing some queries to adequately filter element contents using the previous XPath specification. We also present a novel technique for filtering a collection of document-centric XMLs, called Pfilter, which is able to exploit the extended XPath specification. We show several performance studies, efficiency and scalability using the multi-query processing time (MQPT).
Abstract: Numerical analysis of flow characteristics and
separation efficiency in a high-efficiency cyclone has been performed.
Several models based on the experimental observation for a design
purpose were proposed. However, the model is only estimated the
cyclone's performance under the limited environments; it is difficult to
obtain a general model for all types of cyclones. The purpose of this
study is to find out the flow characteristics and separation efficiency
numerically. The Reynolds stress model (RSM) was employed instead
of a standard k-ε or a k-ω model which was suitable for isotropic
turbulence and it could predict the pressure drop and the Rankine
vortex very well. For small particles, there were three significant
components (entrance of vortex finder, cone, and dust collector) for
the particle separation. In the present work, the particle re-entraining
phenomenon from the dust collector to the cyclone body was observed
after considerable time. This re-entrainment degraded the separation
efficiency and was one of the significant factors for the separation
efficiency of the cyclone.
Abstract: This paper presents a rule-based text- to- speech
(TTS) Synthesis System for Standard Malay, namely SMaTTS. The
proposed system using sinusoidal method and some pre- recorded
wave files in generating speech for the system. The use of phone
database significantly decreases the amount of computer memory
space used, thus making the system very light and embeddable. The
overall system was comprised of two phases the Natural Language
Processing (NLP) that consisted of the high-level processing of text
analysis, phonetic analysis, text normalization and morphophonemic
module. The module was designed specially for SM to overcome
few problems in defining the rules for SM orthography system before
it can be passed to the DSP module. The second phase is the Digital
Signal Processing (DSP) which operated on the low-level process of
the speech waveform generation. A developed an intelligible and
adequately natural sounding formant-based speech synthesis system
with a light and user-friendly Graphical User Interface (GUI) is
introduced. A Standard Malay Language (SM) phoneme set and an
inclusive set of phone database have been constructed carefully for
this phone-based speech synthesizer. By applying the generative
phonology, a comprehensive letter-to-sound (LTS) rules and a
pronunciation lexicon have been invented for SMaTTS. As for the
evaluation tests, a set of Diagnostic Rhyme Test (DRT) word list was
compiled and several experiments have been performed to evaluate
the quality of the synthesized speech by analyzing the Mean Opinion
Score (MOS) obtained. The overall performance of the system as
well as the room for improvements was thoroughly discussed.
Abstract: The use of sewage sludge and effluents from
wastewater treatment plants for irrigation of agricultural lands is on
the rise particularly in peri-urban areas of developing countries.
The reuse of nutrients and organic matter in treated wastewater
and sewage sludge via land application is a desirable goal. However,
trace or heavy metals present in sludge pose the risk of human or
phytotoxicity from land application. Long-term use of sewage
sludge, heavy metals can accumulate to phytotoxic levels and results
in reduced plants growth and/or enhanced metal concentrations in
plants, which consumed by animals then enter the food chain. In this
research, the amount of heavy metals was measured in plants
irrigated with wastewater and sludge application. For this purpose,
three pilots were made in a Shush treatment plant in south of Tehran.
Three plants species, spinach, lettuce and radish were selected and
planted in the pilots.First pilot was irrigated just with wastewater of
treatment plant and second pilot was irrigated with wastewater and
sludge application .Third pilot was irrigated with simulated heavy
metals solution equal 50 years of irrigation. The results indicate that
the average of amount of heavy metals Pb, Cd in three plant species
in first pilot were lower than permissible limits .In second pilot,
Cadmium accumulations are high in three species plants and more
than the standard limits. Concentration of Cd , Pb have exceed their
permitted limits in plants in third pilot . It was concluded that the use
of wastewater and sludge application in agricultural lands enriched
soils with heavy metals to concentrations that may pose potential
environmental and health risks in the long-term.
Abstract: This paper examines the problem of designing a robust H∞ filter for a class of uncertain fuzzy descriptor systems described by a Takagi-Sugeno (TS) fuzzy model. Based on a linear matrix inequality (LMI) approach, LMI-based sufficient conditions for the uncertain nonlinear descriptor systems to have an H∞ performance are derived. To alleviate the ill-conditioning resulting from the interaction of slow and fast dynamic modes, solutions to the problem are given in terms of linear matrix inequalities which are independent of the singular perturbation ε, when ε is sufficiently small. The proposed approach does not involve the separation of states into slow and fast ones and it can be applied not only to standard, but also to nonstandard uncertain nonlinear descriptor systems. A numerical example is provided to illustrate the design developed in this paper.
Abstract: This paper presents a computational study of the separated flow in a planer asymmetric diffuser. The steady RANS equations for turbulent incompressible fluid flow and six turbulence closures are used in the present study. The commercial software code, FLUENT 6.3.26, was used for solving the set of governing equations using various turbulence models. Five of the used turbulence models are available directly in the code while the v2-f turbulence model was implemented via User Defined Scalars (UDS) and User Defined Functions (UDF). A series of computational analysis is performed to assess the performance of turbulence models at different grid density. The results show that the standard k-ω, SST k-ω and v2-f models clearly performed better than other models when an adverse pressure gradient was present. The RSM model shows an acceptable agreement with the velocity and turbulent kinetic energy profiles but it failed to predict the location of separation and attachment points. The standard k-ε and the low-Re k- ε delivered very poor results.
Abstract: In this paper, a strategy for long-span bridge disaster response was developed, divided into risk analysis, business impact analysis, and emergency response plan. At the risk analysis stage, the critical risk was estimated. The critical risk was “car accident."The critical process by critical-risk classification was assessed at the business impact analysis stage. The critical process was the task related to the road conditions and traffic safety. Based on the results of the precedent analysis, an emergency response plan was established. By making the order of the standard operating procedures clear, an effective plan for dealing with disaster was formulated. Finally, a prototype software was developed based on the research findings. This study laid the foundation of an information-technology-based disaster response guideline and is significant in that it computerized the disaster response plan to improve the plan-s accessibility.
Abstract: The scroll pump belongs to the category of positive
displacement pump can be used for continuous pumping of gases at
low pressure apart from general vacuum application. The shape of
volume occupied by the gas moves and deforms continuously as the
spiral orbits. To capture flow features in such domain where mesh
deformation varies with time in a complicated manner, mesh less
solver was found to be very useful. Least Squares Kinetic Upwind
Method (LSKUM) is a kinetic theory based mesh free Euler solver
working on arbitrary distribution of points. Here upwind is enforced
in molecular level based on kinetic flux vector splitting scheme
(KFVS). In the present study we extended the LSKUM to moving
node viscous flow application. This new code LSKUM-NS-MN for
moving node viscous flow is validated for standard airfoil pitching
test case. Simulation performed for flow through scroll pump using
LSKUM-NS-MN code agrees well with the experimental pumping
speed data.
Abstract: Tritium activity concentration in Danube river water
in Serbia has been determinate using a liquid scintillation counter
Quantulus 1220. During December 2010, water samples were taken
along the entire course of Danube through Serbia, from Hungarian-
Serbian to Romanian-Serbian border. This investigation is very
important because of the nearness of nuclear reactor Paks in
Hungary. Sample preparation was performed by standard test method
using Optiphase HiSafe 3 scintillation cocktail. We used a rapid
method for the preparation of environmental samples, without
electrolytic enrichment.
Abstract: For today-s and future wireless communications applications,
more and more data traffic has to be transmitted with
growing speed and quality demands. The analog front-end of any
mobile device has to cope with very hard specifications regardless
which transmission standard has to be supported. State-of-the-art
analog front-end implementations are reaching the limit of technical
feasibility. For that reason, alternative front-end architectures could
support a continuing development of mobile communications e.g.,
six-port-based front-ends [1], [2].
In this article we propose an analog front-end with high intermediate
frequency and which utilizes additive mixing instead
of multiplicative mixing. The system architecture is presented and
several spurious effects as well as their influence on the system
dimensioning are discussed. Furthermore, several issues concerning
the technical feasibility are provided and some simulation results
are discussed which show the principle functionality of the proposed
superposition heterodyne receiver.
Abstract: Design Patterns have gained more and more
acceptances since their emerging in software development world last
decade and become another de facto standard of essential knowledge
for Object-Oriented Programming developers nowadays.
Their target usage, from the beginning, was for regular computers,
so, minimizing power consumption had never been a concern.
However, in this decade, demands of more complicated software for
running on mobile devices has grown rapidly as the much higher
performance portable gadgets have been supplied to the market
continuously. To get along with time to market that is business
reason, the section of software development for power conscious,
battery, devices has shifted itself from using specific low-level
languages to higher level ones. Currently, complicated software
running on mobile devices are often developed by high level
languages those support OOP concepts. These cause the trend of
embracing Design Patterns to mobile world.
However, using Design Patterns directly in software development
for power conscious systems is not recommended because they were
not originally designed for such environment. This paper
demonstrates the adapted Design Pattern for power limitation system.
Because there are numerous original design patterns, it is not possible
to mention the whole at once. So, this paper focuses only in creating
Energy Conscious version of existing regular "Builder Pattern" to be
appropriated for developing low power consumption software.