Abstract: Eigenvector methods are gaining increasing acceptance in the area of spectrum estimation. This paper presents a successful attempt at testing and evaluating the performance of two of the most popular types of subspace techniques in determining the parameters of multiexponential signals with real decay constants buried in noise. In particular, MUSIC (Multiple Signal Classification) and minimum-norm techniques are examined. It is shown that these methods perform almost equally well on multiexponential signals with MUSIC displaying better defined peaks.
Abstract: The talks about technological convergence had been
around for almost twenty years. Today Internet made it possible. And
this is not only technical evolution. The way it changed our lives
reflected in variety of applications, services and technologies used in
day-to-day life. Such benefits imposed even more requirements on
heterogeneous and unreliable IP networks.
Current paper outlines QoS management system developed in the
NetQoS [1] project. It describes an overall architecture of
management system for heterogeneous networks and proposes
automated multi-layer QoS management. Paper focuses on the
structure of the most crucial modules of the system that enable
autonomous and multi-layer provisioning and dynamic adaptation.
Abstract: One of the potential and effective ways of
storing thermal energy in buildings is the integration of brick with phase change materials (PCMs). This paper presents a two-dimensional model for simulating and analyzing of PCM
in order to minimize energy consumption in the buildings. The numerical approach has been used with the real weather data of a selected city of Iran (Tehran). Two kinds of brick integrated PCM are investigated and compared base on
outdoor weather conditions and the amount of energy
consumption. The results show a significant reduction in
maximum entering heat flux to building about 32.8%
depending on PCM quantity. The results are analyzed by
various temperature contour plots. The contour plots
illustrated the time dependent mechanism of entering heat flux for a brick integrated with PCM. Further analysis is developed to investigate the effect of PCM location on the inlet heat flux. The results demonstrated that to achieve maximum performance of PCM it is better to locate PCM near the outdoor.
Abstract: Capital structure is one of the most important financial
decisions in corporate financing strategy. It involves the choice of
debt and equity level in financing a company-s operations. This study
aims to investigate whether the capital structure choice of Malaysian
electrical and electronic manufacturing companies that are listed in
the Bursa Malaysia can be explained by factors that have been found
by most studies as dominant determinants of capital structure
(company size, profitability, asset tangibility, liquidity and growth).
Using debt ratio as the proxy for capital structure and applying
pooled ordinary least square multiple regression estimation, the
results showed that on average, Malaysian electrical and electronic
manufacturing companies used less debt in funding their business
operations. The findings also showed that size and asset tangibility
has a significant positive relationship with debt level, while liquidity
has a negative significant relationship with leverage.
Abstract: Manufacturing, production and service industries within Libya have struggled with many problems during the past two decades due to many difficulties. These problems have created a negative impact on the productivity and utilization of many industries around the country. This paper studies the implementation levels of the manufacturing control systems known as Manufacturing Resource Planning (MRPII) being adapted within some Libyan industries. A survey methodology has been applied for this research, based on the survey analysis, the results pointed out that the system within these industries has a modest strategy towards most of the areas that are considered as being very crucial in implementing these systems successfully. The findings also show a variation within these implementation levels with a respect to the key-elements that related to MRPII, giving the highest levels in the emphasise on financial data accuracy. The paper has also identified limitations within the investigated manufacturing and managerial areas and has pointed to where senior managers should take immediate actions in order to achieve effective implementation of MRPII within their business area.
Abstract: Collaborative problem solving in e-learning can take
in the form of discussion among learner, creating a highly social
learning environment and characterized by participation and
interactivity. This paper, designed a collaborative learning
environment where agent act as co-learner, can play different roles
during interaction. Since different roles have been assigned to the
agent, learner will assume that multiple co-learner exists to help and
guide him all throughout the collaborative problem solving process,
but in fact, alone during the learning process. Specifically, it answers
the questions what roles of the agent should be incorporated to
contribute better learning outcomes, how agent will facilitate the
communication process to provide social learning and interactivity
and what are the specific instructional strategies that facilitate learner
participation, increased skill acquisition and develop critical thinking.
Abstract: In this paper we consider the problem of distributed adaptive estimation in wireless sensor networks for two different observation noise conditions. In the first case, we assume that there are some sensors with high observation noise variance (noisy sensors) in the network. In the second case, different variance for observation noise is assumed among the sensors which is more close to real scenario. In both cases, an initial estimate of each sensor-s observation noise is obtained. For the first case, we show that when there are such sensors in the network, the performance of conventional distributed adaptive estimation algorithms such as incremental distributed least mean square (IDLMS) algorithm drastically decreases. In addition, detecting and ignoring these sensors leads to a better performance in a sense of estimation. In the next step, we propose a simple algorithm to detect theses noisy sensors and modify the IDLMS algorithm to deal with noisy sensors. For the second case, we propose a new algorithm in which the step-size parameter is adjusted for each sensor according to its observation noise variance. As the simulation results show, the proposed methods outperforms the IDLMS algorithm in the same condition.
Abstract: A numerical investigation of the effects of nanosecond
barrier discharge on the stability of a two-dimensional free shear layer
is performed. The computations are carried out using a compressible
Navier-Stokes algorithm coupled with a thermodynamic model of the
discharge. The results show that significant increases in the shear
layer-s momentum thickness and Reynolds stresses occur due to
actuation. Dependence on both frequency and amplitude of actuation
are considered, and a comparison is made of the computed growth
rates with those predicted by linear stability theory. Amplitude and
frequency ranges for the efficient promotion of shear-layer instabilities
are identified.
Abstract: This article presents a numerical study of the doublediffusive
mixed convection in a vertical channel filled with porous
medium by using non-equilibrium model. The flow is assumed
fully developed, uni-directional and steady state. The controlling
parameters are thermal Rayleigh number (RaT ), Darcy number (Da),
Forchheimer number (F), buoyancy ratio (N), inter phase heat transfer
coefficient (H), and porosity scaled thermal conductivity ratio
(γ). The Brinkman-extended non-Darcy model is considered. The
governing equations are solved by spectral collocation method. The
main emphasize is given on flow profiles as well as heat and solute
transfer rates, when two diffusive components in terms of buoyancy
ratio are in favor (against) of each other and solid matrix and fluid
are thermally non-equilibrium. The results show that, for aiding flow
(RaT = 1000), the heat transfer rate of fluid (Nuf ) increases upto a
certain value of H, beyond that decreases smoothly and converges
to a constant, whereas in case of opposing flow (RaT = -1000),
the result is same for N = 0 and 1. The variation of Nuf in (N,
Nuf )-plane shows sinusoidal pattern for RaT = -1000. For both cases
(aiding and opposing) the flow destabilize on increasing N by inviting
point of inflection or flow separation on the velocity profile. Overall,
the buoyancy force have significant impact on the non-Darcy mixed
convection under LTNE conditions.
Abstract: Introduction: Visual performance is an important factor in sport excellence. Visual involvement in a sport varies according to environmental demands associated with that sport. These environmental demands are matched by a task specific motor response. The purpose of this study was to determine if sport specific exercises will improve the visual performance of male rugby players, in order to achieve maximal results on the sports field. Materials & Methods: Twenty six adult male rugby players, aged 16-22, were chosen as subjects. In order to evaluate the effect of sport specific exercises on visual skills, a pre-test - post-test experimental group design was adopted for the study. Results: Significant differences (p≤0.05) were seen in the focussing, tracking, vergence, sequencing, eye-hand coordination and visualisation components Discussion & Conclusions: Sport specific exercises improved visual skills in rugby players which may provide them with an advantage over their opponents. This study suggests that these training programs and participation in regular on-line EyeDrills sports vision exercises (www.eyedrills.co.za) aimed at improving the athlete-s visual coordination, concentration, focus, hand-eye co-ordination, anticipation and motor response should be incorpotated in the rugby players exercise regime.
Abstract: The use of un-activated bentonite, and un-activated
bentonite blended with limestone for the treatment of acid mine
drainage (AMD) was investigated. Batch experiments were
conducted in a 5 L PVC reactor. Un-activated bentonite on its own
did not effectively neutralize and remove heavy metals from AMD.
The final pH obtained was below 4 and the metal removal efficiency
was below 50% for all the metals when bentonite solid loadings of 1,
5 and 10% were used. With un-activated bentonite (1%) blended with
1% limestone, the final pH obtained was approximately 7 and metal
removal efficiencies were greater than 60% for most of the metals.
The Langmuir isotherm gave the best fit for the experimental data
giving correlation coefficient (R2) very close to 1. Thus, it was
concluded that un-activated bentonite blended with limestone is
suitable for potential applications in removing heavy metals and
neutralizing AMD.
Abstract: This study investigated the climatic factors associated
with Influenza incidence in Nakhon Si Thammarat, Southern
Thailand. Climatic factors comprised of the amount of rainfall,
percent of rainy days, relative humidity, wind speed, maximum,
minimum temperatures and temperature difference. A multiple
stepwise regression technique was used to fit the statistical model.
The result showed that the temperature difference and percent of
rainy days were positively associated with Influenza incidence in
Nakhon Si Thammarat.
Abstract: The top-heavy demographic of low birth-rate and longer lifespan is a growing social problem, and one of its expected effects will be a shortage of young workers and a growing reliance on a workforce of middle-aged and older people. However, the environment of today's industrial workplace is not particularly suited to middle-aged and older workers, one notable problem being temperature control. Higher temperatures can cause health problems such as heat stroke, and the number of cases increases sharply in people over 65. Moreover, in conditions above 33°C, older people can develop circulatory system disorders, and also have a higher chance of suffering a fatal heart attack. We therefore propose a new method for controlling temperature in the indoor workplace. In this study two different verification experiments were conducted, with the proposed temperature control method being tested in cargo containers and conventional houses. The method's effectiveness was apparent in measurements of temperature and electricity consumption
Abstract: In the present paper, we investigate a differential subordination
involving multiplier transformation related to a sector in the
open unit disk E = {z : |z| < 1}. As special cases to our main
result, certain sufficient conditions for strongly starlike and strongly
convex functions are obtained.
Abstract: An optimal control problem for a mathematical model of efficiency of antiviral therapy in hepatitis B virus infections is considered. The aim of the study is to control the new viral production, block the new infection cells and maintain the number of uninfected cells in the given range. The optimal controls represent the efficiency of antiviral therapy in inhibiting viral production and preventing new infections. Defining the cost functional, the optimal control problem is converted into the constrained optimization problem and the first order optimality system is derived. For the numerical simulation, we propose the steepest descent algorithm based on the adjoint variable method. A computer program in MATLAB is developed for the numerical simulations.
Abstract: This paper deals with a periodic-review substitutable
inventory system for a finite and an infinite number of periods. Here
an upward substitution structure, a substitution of a more costly item
by a less costly one, is assumed, with two products. At the beginning
of each period, a stochastic demand comes for the first item only,
which is quality-wise better and hence costlier. Whenever an arriving
demand finds zero inventory of this product, a fraction of unsatisfied
customers goes for its substitutable second item. An optimal ordering
policy has been derived for each period. The results are illustrated
with numerical examples. A sensitivity analysis has been done to
examine how sensitive the optimal solution and the maximum profit
are to the values of the discount factor, when there is a large number
of periods.
Abstract: In this paper multi-objective genetic algorithms are
employed for Pareto approach optimization of ideal Turboshaft
engines. In the multi-objective optimization a number of conflicting
objective functions are to be optimized simultaneously. The
important objective functions that have been considered for
optimization are specific thrust (F/m& 0), specific fuel consumption
( P S ), output shaft power 0 (& /&) shaft W m and overall efficiency( ) O
η .
These objectives are usually conflicting with each other. The design
variables consist of thermodynamic parameters (compressor pressure
ratio, turbine temperature ratio and Mach number).
At the first stage single objective optimization has been
investigated and the method of NSGA-II has been used for multiobjective
optimization. Optimization procedures are performed for
two and four objective functions and the results are compared for
ideal Turboshaft engine. In order to investigate the optimal
thermodynamic behavior of two objectives, different set, each
including two objectives of output parameters, are considered
individually. For each set Pareto front are depicted. The sets of
selected decision variables based on this Pareto front, will cause the
best possible combination of corresponding objective functions.
There is no superiority for the points on the Pareto front figure,
but they are superior to any other point. In the case of four objective
optimization the results are given in tables.
Abstract: Arbitrarily shaped video objects are an important
concept in modern video coding methods. The techniques presently
used are not based on image elements but rather video objects having
an arbitrary shape. In this paper, spatial shape error concealment
techniques to be used for object-based image in error-prone
environments are proposed. We consider a geometric shape
representation consisting of the object boundary, which can be
extracted from the α-plane. Three different approaches are used to
replace a missing boundary segment: Bézier interpolation, Bézier
approximation and NURBS approximation. Experimental results on
object shape with different concealment difficulty demonstrate the
performance of the proposed methods. Comparisons with proposed
methods are also presented.
Abstract: In the last decades to supply the various and different
demands of clients, a lot of manufacturers trend to use the mixedmodel
assembly line (MMAL) in their production lines, since this
policy make possible to assemble various and different models of the
equivalent goods on the same line with the MTO approach.
In this article, we determine the sequence of (MMAL) line, with
applying the kitting approach and planning of rest time for general
workers to reduce the wastages, increase the workers effectiveness
and apply the sector of lean production approach.
This Multi-objective sequencing problem solved in small size with
GAMS22.2 and PSO meta heuristic in 10 test problems and compare
their results together and conclude that their results are very similar
together, next we determine the important factors in computing the
cost, which improving them cost reduced. Since this problem, is NPhard
in large size, we use the particle swarm optimization (PSO)
meta-heuristic for solving it. In large size we define some test
problems to survey it-s performance and determine the important
factors in calculating the cost, that by change or improved them
production in minimum cost will be possible.
Abstract: In this paper, we represent protein structure by using
graph. A protein structure database will become a graph database.
Each graph is represented by a spectral vector. We use Jacobi
rotation algorithm to calculate the eigenvalues of the normalized
Laplacian representation of adjacency matrix of graph. To measure
the similarity between two graphs, we calculate the Euclidean
distance between two graph spectral vectors. To cluster the graphs,
we use M-tree with the Euclidean distance to cluster spectral vectors.
Besides, M-tree can be used for graph searching in graph database.
Our proposal method was tested with graph database of 100 graphs
representing 100 protein structures downloaded from Protein Data
Bank (PDB) and we compare the result with the SCOP hierarchical
structure.