Abstract: Fecal sterol has been proposed as a chemical indicator
of human fecal pollution even when fecal coliform populations have
diminished due to water chlorination or toxic effects of industrial
effluents. This paper describes an improved derivatization procedure
for simultaneous determination of four fecal sterols including
coprostanol, epicholestanol, cholesterol and cholestanol using gas
chromatography-mass spectrometry (GC-MS), via optimization study
on silylation procedures using N-O-bis
(trimethylsilyl)-trifluoroacetamide (BSTFA), and
N-(tert-butyldimethylsilyl)-N-methyltrifluoroacetamide
(MTBSTFA), which lead to the formation of trimethylsilyl (TMS) and
tert-butyldimethylsilyl (TBS) derivatives, respectively. Two
derivatization processes of injection-port derivatization and water bath
derivatization (60 oC, 1h) were inspected and compared. Furthermore,
the methylation procedure at 25 oC for 2h with
trimethylsilydiazomethane (TMSD) for fecal sterols analysis was also
studied. It was found that most of TMS derivatives demonstrated the
highest sensitivities, followed by methylated derivatives. For BSTFA
or MTBSTFA derivatization processes, the simple injection-port
derivatization process could achieve the same efficiency as that in the
tedious water bath derivatization procedure.
Abstract: This work has been conducted to study on comfort level of drivers of suspended cabin tractor semitrailer. Some drivers suffer from low back pain caused by vibration. The practical significance of applying suspended cabin type of tractor semi trailer was tested at different road conditions, different speed as well as different load conditions for comfortable driver seat interface (x, y, z ) and the process parameters have been prioritized using Taguchi-s L27 orthogonal array. Genetic Algorithm (GA) is used to optimize the human comfort vibration of suspended cabin tractor semitrailer drivers. The practical significance of applying GA to human comfort to reaction of suspended cabin tractor semitrailer has been validated by means of computing the deviation between predicted and experimentally obtained human comfort to vibration. The optimized acceleration data indicate a little uncomfortable ride for suspended cabin tractor semitrailer.
Abstract: For the past thirty years the Malaysian economy has been said to contribute well to the progress of the nations. However, the intensification of global economy activity and the extensive use of Information Communication Technologies (ICTs) in recent years are challenging government-s effort to further develop Malaysian society. The competition posed by the low wage economies such as China and Vietnam have made the government realise the importance of engaging in high-skill and high technology industries. It is hoped this will be the basis of attracting more foreign direct investment (FDI) in order to help the country to compete in globalised world. Using Vision 2020 as it targeted vision, the government has decided to engage in the use of ICTs and introduce many policies pertaining to it. Mainly based on the secondary analysis approach, the findings show that policy pertaining to ICTs in Malaysia contributes to economic growth, but the consequences of this have resulted in greater division within society. Although some of the divisions such as gender and ethnicity are narrowing down, the gap in important areas such as regions and class differences is becoming wider. The widespread use of ICTs might contribute to the further establishment of democracy in Malaysia, but the increasing number of foreign entities such as FDI and foreign workers, cultural hybridisation and to some extent cultural domination are contributing to neocolonialism in Malaysia. This has obvious consequences for the government-s effort to create a Malaysian national identity. An important finding of this work is that there are contradictions within ICT policy between the effort to develop the economy and society.
Abstract: Ethanol has become more attractive in fuel industry
either as fuel itself or an additive that helps enhancing the octane
number and combustibility of gasoline. This research studied a
pressure swing adsorption using cassava-based adsorbent prepared
from mixture of cassava starch and cassava pulp for dehydration of
ethanol vapor. The apparatus used in the experiments consisted of
double adsorption columns, an evaporator, and a vacuum pump. The
feed solution contained 90-92 %wt of ethanol. Three process
variables: adsorption temperatures (110, 120 and 130°C), adsorption
pressures (1 and 2 bar gauge) and feed vapor flow rate (25, 50 and 75
% valve opening of the evaporator) were investigated. According to
the experimental results, the optimal operating condition for this
system was found to be at 2 bar gauge for adsorption pressure, 120°C
for adsorption temperature and 25% valve opening of the evaporator.
Production of 1.48 grams of ethanol with concentration higher than
99.5 wt% per gram of adsorbent was obtained. PSA with cassavabased
adsorbent reported in this study could be an alternative method
for production of nearly anhydrous ethanol. Dehydration of ethanol
vapor achieved in this study is due to an interaction between free
hydroxyl group on the glucose units of the starch and the water
molecules.
Abstract: We consider herein a concise view of discreet
programming models and methods. There has been conducted the
models and methods analysis. On the basis of discreet programming
models there has been elaborated and offered a new class of
problems, i.e. block-symmetry models and methods of applied tasks
statements and solutions.
Abstract: Ontology-based modelling of multi-formatted
software application content is a challenging area in content
management. When the number of software content unit is huge and
in continuous process of change, content change management is
important. The management of content in this context requires
targeted access and manipulation methods. We present a novel
approach to deal with model-driven content-centric information
systems and access to their content. At the core of our approach is an
ontology-based semantic annotation technique for diversely
formatted content that can improve the accuracy of access and
systems evolution. Domain ontologies represent domain-specific
concepts and conform to metamodels. Different ontologies - from
application domain ontologies to software ontologies - capture and
model the different properties and perspectives on a software content
unit. Interdependencies between domain ontologies, the artifacts and
the content are captured through a trace model. The annotation traces
are formalised and a graph-based system is selected for the
representation of the annotation traces.
Abstract: It is the living conditions in the cities that determine the future of our livelihood. “To change life, we must first change space"- Henri Lefebvre. Sustainable development is a utopian aspiration for South African cities (especially the case study of the Gauteng City Region), which are currently characterized by unplanned growth and increasing urban sprawl. While the reasons for poor environmental quality and living conditions are undoubtedly diverse and complex, having political, economical and social dimensions, it is argued that the prevailing approach to layout planning in South Africa is part of the problem. This article seeks a solution to the problem of sustainability, from a spatial planning perspective. The spatial planning tool, the urban development boundary, is introduced as the concept that will ensure empty talk being translated into a sustainable vision. The urban development boundary is a spatial planning tool that can be used and implemented to direct urban growth towards a more sustainable form. The urban development boundary aims to ensure planned urban areas, in contrast to the current unplanned areas characterized by urban sprawl and insufficient infrastructure. However, the success of the urban development boundary concept is subject to effective implementation measures, as well as adequate and efficient management. The concept of sustainable development can function as a driving force underlying societal change and transformation, but the interface between spatial planning and environmental management needs to be established (as this is the core aspects underlying sustainable development), and authorities needs to understand and implement this interface consecutively. This interface can, however, realize in terms of the objectives of the planning tool – the urban development boundary. The case study, the Gauteng City Region, is depicted as a site of economic growth and innovation, but there is a lack of good urban and regional governance, impacting on the design (layout) and function of urban areas and land use, as current authorities make uninformed decisions in terms of development applications, leading to unsustainable urban forms and unsustainable nodes. Place and space concepts are thus critical matters applicable to planning of the Gauteng City Region. The urban development boundary are thus explored as a planning tool to guide decision-making, and create a sustainable urban form, leading to better environmental and living conditions, and continuous sustainability.
Abstract: Regression testing is a maintenance activity applied to
modified software to provide confidence that the changed parts are
correct and that the unchanged parts have not been adversely affected
by the modifications. Regression test selection techniques reduce the
cost of regression testing, by selecting a subset of an existing test
suite to use in retesting modified programs. This paper presents the
first general regression-test-selection technique, which based on code
and allows selecting test cases for any programs written in any
programming language. Then it handles incomplete program. We
also describe RTSDiff, a regression-test-selection system that
implements the proposed technique. The results of the empirical
studied that performed in four programming languages java, C#, Cµ
and Visual basic show that the efficiency and effective in reducing
the size of test suit.
Abstract: In this paper optimal capacitor placement problem has
been formulated in a restructured distribution network. In this
scenario the distribution network operator can consider reactive
energy also as a service that can be sold to transmission system. Thus
search for optimal location, size and number of capacitor banks with
the objective of loss reduction, maximum income from selling
reactive energy to transmission system and return on investment for
capacitors, has been performed. Results is influenced with economic
value of reactive energy, therefore problem has been solved for
various amounts of it. The implemented optimization technique is
genetic algorithm. For any value of reactive power economic value,
when reverse of investment index increase and change from zero or
negative values to positive values, the threshold value of selling
reactive power has been obtained. This increasing price of economic
parameter is reasonable until the network losses is less than loss
before compensation.
Abstract: This paper attempts to explore a new method to
improve the teaching of algorithmic for beginners. It is well known
that algorithmic is a difficult field to teach for teacher and complex to
assimilate for learner. These difficulties are due to intrinsic
characteristics of this field and to the manner that teachers (the
majority) apprehend its bases. However, in a Technology Enhanced
Learning environment (TEL), assessment, which is important and
indispensable, is the most delicate phase to implement, for all
problems that generate (noise...). Our objective registers in the
confluence of these two axes. For this purpose, EASEL focused
essentially to elaborate an assessment approach of algorithmic
competences in a TEL environment. This approach consists in
modeling an algorithmic solution according to basic and elementary
operations which let learner draw his/her own step with all autonomy
and independently to any programming language. This approach
assures a trilateral assessment: summative, formative and diagnostic
assessment.
Abstract: Today, canines are still used effectively in acceleration detection situation. However, this method is becoming impractical in modern age and a new automated replacement to the canine is required. This paper reports the design of an innovative accelerant detector. Designing an accelerant detector is a long process as is any design process; therefore, a solution to the need for a mobile, effective accelerant detector is hereby presented. The device is simple and efficient to ensure that any accelerant detection can be conducted quickly and easily. The design utilizes Ultra Violet (UV) light to detect the accelerant. When the UV light shines on an accelerant, the hydrocarbons in the accelerant emit florescence. The advantages of using the UV light to detect accelerant are also outlined in this paper. The mobility of the device is achieved by using a Direct Current (DC) motor to run tank tracks. Tank tracks were chosen as to ensure that the device will be mobile in the rough terrain of a fire site. The materials selected for the various parts are also presented. A Solid Works Simulation was also conducted on the stresses in the shafts and the results are presented. This design is an innovative solution which offers a user friendly interface. The design is also environmentally friendly, ecologically sound and safe to use.
Abstract: This paper deals with the status of solid waste pollution in touristic spots of North coastal Andhra Pradesh. Case studies of Eco tourism, cultural tourism and pilgrim tourism are elaborately discussed and the study is based on both primary and secondary data. Data collection includes field collection of solid waste, semi structured interviews and observation of tourists. Results indicate generation of 72% Non biodegradable material in Eco touristic places like RK beach Visakhapatnam, Araku Valley. Pydithalli Jathra is a famous cultural touristic attraction and more than one lakh people converge here. The solid waste at this spot includes 20% coconut shells, 50% plastic bottles and covers, 20% Banana peelings and remaining are food materials. Radhasapthami is the most important festival celebrated at famous sun temple Arasavalli of Srikakulam. Here solid waste includes 50% water bottles, plastic covers, 10% papers, 10% hair, 30% left out food material and Banana peelings.
Abstract: Supplier appraisal fosters energy in Supply Chain
Management and helps in best optimization of viable business
partners for a company. Many Decision Making techniques have
already been proposed by researchers for supplier-s appraisal.
However, Analytic Hierarchy Process (AHP) is assumed to be the
most structured technique to attain near-best solution of the problem.
This paper focuses at implementation of AHP in the procurement
processes. It also suggests that on what factors a Public Sector
Enterprises must focus while dealing with their suppliers and what
should the suppliers do to synchronize their activities with the
strategic objectives of Organization. It also highlights the weak areas
in supplier appraisal process with a view to suggest viable
recommendations.
Abstract: In this article the authors investigate the main
tendencies of development of the management in the education system of the Republic of Kazakhstan: problems, solutions and
development of the education system of Kazakhstan in the realities of globalization.
Abstract: A submerged horizontal plate type breakwater is
pointed out as an efficient wave protection device for cage culture in
marine fishery. In order to reveal the wave elimination principle of this
type breakwater, boundary element method is utilized to investigate
this problem. The flow field and the trajectory of water particles are
studied carefully. The flow field analysis shows that: the interaction of
incident wave and adverse current above the plate disturbs the water
domain drastically. This can slow down the horizontal velocity and
vertical velocity of the water particles.
Abstract: Neoclassical and functionalist explanations of self
organization in multiagent systems have been criticized on several accounts including unrealistic explication of overadapted agents and
failure to resolve problems of externality. The paper outlines a more
elaborate and dynamic model that is capable of resolving these dilemmas. An illustrative example where behavioral diversity is
cobred in a repeated nonzero sum task via evolutionary computing is
presented.
Abstract: A study of the H-beam's nanosize structure phase
states after thermomechanical strengthening was carried out by TEM.
The following processes were analyzed. 1. The dispersing of the
cementite plates by cutting them by moving dislocations. 2. The
dissolution of cementite plates and repeated precipitation of the
cementite particles on the dislocations, the boundaries, subgrains and
grains. 3. The decay of solid solution of carbon in the α-iron after
"self-tempering" of martensite. 4. The final transformation of the
retained austenite in beinite with α-iron particles and cementite
formation. 5. The implementation of the diffusion mechanism of γ ⇒
α transformation.
Abstract: With the demand of mobility by users, wireless
technologies have become the hotspot developing arena. Internet
Engineering Task Force (IETF) working group has developed Mobile
IP to support node mobility. The concept of node mobility indicates
that in spite of the movement of the node, it is still connected to the
internet and all the data transactions are preserved. It provides
location-independent access to Internet. After the incorporation of
host mobility, network mobility has undergone intense research.
There are several intricacies faced in the real world implementation
of network mobility significantly the problem of nested networks and
their consequences. This article is concerned regarding a problem of
nested network called pinball route problem and proposes a solution
to eliminate the above problem. The proposed mechanism is
implemented using NS2 simulation tool and it is found that the
proposed mechanism efficiently reduces the overload caused by the
pinball route problem.
Abstract: In the meat processing industry the substitution of
meat with non-meat ingredients is considered an important strategy
for reducing overall production costs. The main purpose of the
current research was to evaluate differences in physical-chemical
composition of cooked sausage with different legumes additions.
Peas (Pisum sativum), beans (Phaseolus vulgaris) and lentil (Lens
culinaris) were used in preparation of sausages. The legumes at
proportion of 20% of the total weight of meat were added in
sausages. The whole ingredients were mixed, filled into casing,
compressed, cooked and cooled. After storage the samples were
sensory evaluated. The sensory evaluation was carried out using the
nine point hedonic scale and line scale. Sausages without legumes
flour was used as control sample. The main conclusion of the current
research the legumes flour can be successfully used for cooked
sausages production.
Abstract: This paper is concerned with an investigation into the
localized non-stability of a thin elastic orthotropic semi-infinite plate.
In this study, a semi-infinite plate, simply supported on two edges
and different boundary conditions, clamped, hinged, sliding contact
and free on the other edge, are considered. The mathematical model
is used and a general solution is presented the conditions under which
localized solutions exist are investigated.