Abstract: The present investigation aimed to study the
histomorphometric characterizations of the thyroid gland of the duck.
Five adult male and five adult female ducks were used in the
experiment. Results showed that the overall histological structure of
the thyroid gland of the duck were similar to those of the other
vertebrae. The gland consisted of roughly spherical randomly
distributed micro and macrofollicles with very little interstitial tissue
between them. Each follicle is lined by a single layer of epithelial
cells enclosing a cavity, the follicular cavity, which is filled with
colloid. Ultrastructural findings showed that the apical surface of the
follicular cells bears a variable number of short, irregularly
distributed microvilli which are apparently more numerous on the
columnar cells than on the lower, relatively inactive cells.
Mitochondria and rough endoplasmic reticulum occupy the
subnuclear region of the follicular cell, whereas the Golgi complex,
free ribosomes and colloid droplets were found in the apical
cytoplasm. At light or electron microscopic levels, there was no sex
difference in histomorphometric characteristics of the thyroid
glands.ls.
Abstract: This paper compares the heuristic Global Search
Techniques; Genetic Algorithm, Particle Swarm Optimization,
Simulated Annealing, Generalized Pattern Search, genetic algorithm
hybridized with Nelder–Mead and Generalized pattern search
technique for tuning of fuzzy PID controller for Puma 560. Since the
actual control is in joint space ,inverse kinematics is used to generate
various joint angles correspoding to desired cartesian space
trajectory. Efficient dynamics and kinematics are modeled on Matlab
which takes very less simulation time. Performances of all the tuning
methods with and without disturbance are compared in terms of ITSE
in joint space and ISE in cartesian space for spiral trajectory tracking.
Genetic Algorithm hybridized with Generalized Pattern Search is
showing best performance.
Abstract: In films, visual effects have played the role of
expressing realities more realistically or describing imaginations as if
they are real. Such images are immediated images representing
realism, and the logic of immediation for the reality of images has
been perceived dominant in visual effects. In order for immediation to
have an identity as immediation, there should be the opposite concept
hypermediation.
In the mid 2000s, hypermediated images were settled as a code of
mass culture in Asia. Thus, among Asian films highly popular in those
days, this study selected five displaying hypermediated images – 2 Korean, 2 Japanese, and 1 Thailand movies – and examined the
semiotic meanings of such images using Roland Barthes- directional and implicated meaning analysis and Metz-s paradigmatic analysis
method, focusing on how hypermediated images work in the general
context of the films, how they are associated with spaces, and what
meanings they try to carry.
Abstract: Business rules are widely used within the services
sector. They provide consistency and allow relatively unskilled staff
to process complex transactions correctly. But there are many
examples where the rules themselves have an impact on the costs and
profits of an organisation. Financial services, transport and human
services are areas where the rules themselves can impact the bottom
line in a predictable way. If this is the case, how can we find that set
of rules that maximise profit, performance or customer service, or
any other key performance indicators? The manufacturing, energy
and process industries have embraced mathematical optimisation
techniques to improve efficiency, increase production and so on. This
paper explores several real world (but simplified) problems in the
services sector and shows how business rules can be optimised. It
also examines the similarities and differences between the service
and other sectors, and how optimisation techniques could be used to
deliver similar benefits.
Abstract: Feeder is one of the airships of the Multibody Advanced Airship for Transport (MAAT) system, under development within the EU FP7 project. MAAT is based on a modular concept composed of two different parts that have the possibility to join; respectively they are the so-called Cruiser and Feeder, designed on the lighter than air principle. Feeder, also named ATEN (Airship Transport Elevator Network), is the smaller one which joins the bigger one, Cruiser, also named PTAH (Photovoltaic modular Transport Airship for High altitude),envisaged to happen at 15km altitude. During the MAAT design phase, the aerodynamic studies of the both airships and their interactions are analyzed. The objective of these studies is to understand the aerodynamic behavior of all the preselected configurations, as an important element in the overall MAAT system design. The most of these configurations are only simulated by CFD, while the most feasible one is experimentally analyzed in order to validate and thrust the CFD predictions. This paper presents the numerical and experimental investigation of the Feeder “conical like" shape configuration. The experiments are focused on the aerodynamic force coefficients and the pressure distribution over the Feeder outer surface, while the numerical simulation cover also the analysis of the velocity and pressure distribution. Finally, the wind tunnel experiment is compared with its CFD model in order to validate such specific simulations with respective experiments and to better understand the difference between the wind tunnel and in-flight circumstances.
Abstract: By taking advantage of computer-s processing power, an unlimited number of variations and parameters in both spatial and environmental can be provided while following the same set of rules and constraints. This paper focuses on using the tools of parametric urbanism towards a more responsive environmental and sustainable urban morphology. It presents an understanding to Parametric Urban Comfort Envelope (PUCE) as an interactive computational assessment urban model. In addition, it investigates the applicability potentials of this model to generate an optimized urban form to Borg El Arab city (a new Egyptian Community) concerning the human comfort values specially wind and solar envelopes. Finally, this paper utilizes its application outcomes -both visual and numerical- to extend the designer-s limitations by decrease the concern of controlling and manipulation of geometry, and increase the designer-s awareness about the various potentials of using the parametric tools to create relationships that generate multiple geometric alternatives.
Abstract: The intermittent connectivity modifies the “always
on" network assumption made by all the distributed query processing
systems. In modern- day systems, the absence of network
connectivity is considered as a fault. Since the last upload, it might
not be feasible to transmit all the data accumulated right away over
the available connection. It is possible that vital information may be
delayed excessively when the less important information takes place
of the vital information. Owing to the restricted and uneven
bandwidth, it is vital that the mobile nodes make the most
advantageous use of the connectivity when it arrives. Hence, in order
to select the data that needs to be transmitted first, some sort of data
prioritization is essential. A continuous query processing system for
intermittently connected mobile networks that comprises of a delaytolerant
continuous query processor distributed across the mobile
hosts has been proposed in this paper. In addition, a mechanism for
prioritizing query results has been designed that guarantees enhanced
accuracy and reduced delay. It is illustrated that our architecture
reduces the client power consumption, increases query efficiency by
the extensive simulation results.
Abstract: Optical network uses a tool for routing which is called
Latin router. These routers use particular algorithms for routing. In this paper, we present algorithm for configuration of optical network that is optimized regarding previous algorithm. We show that by decreasing the number of hops for source-destination in lightpath number of satisfied request is less. Also we had shown that more than
single-hop lightpath relating single-hop lightpath is better.
Abstract: In this paper a low cost knowledge base system (KBS)
framework is proposed for design of deep drawing die and procedure
for developing system modules. The task of building the system is
structured into different modules for major activities of design of
deep drawing die. A manufacturability assessment module of the
proposed framework is developed to check the manufacturability of
deep drawn parts. The technological knowledge is represented by
using IF- THEN rules and it is coded in AutoLISP language. The
module is designed to be loaded into the prompt area of AutoCAD.
The cost of implementation of proposed system makes it affordable
for small and medium scale sheet metal industries.
Abstract: The study will search the level of existence of the
sweethearting in Saudi Arabia's Supermarkets in Riyadh.
Sweethearting occurs when frontline workers give unauthorized free
or uncounted goods and services to customer-s conspirators. The
store managers and /or security managers were asked about the
sweethearting that occurs in the supermarkets. The characteristics of
sweethearting in Riyadh stores were investigated. Two independent
variables were related to the report of sweethearting. These
independent variables are: The effect of store environment on
sweethearting and the security techniques and loss prevention
electronics techniques used. This study expected to shed the light
about the level of sweethearting in Saudi Arabia and the factors
behind it. This study will serve as an exploratory study for such
phenomenon in Saudi Arabia as well as both descriptive for the
characteristics of sweethearting and explanatory study to link
between the environmental and security systems factors to
sweethearting.
Abstract: An optimal solution for a large number of constraint
satisfaction problems can be found using the technique of
substitution and elimination of variables analogous to the technique
that is used to solve systems of equations. A decision function
f(A)=max(A2) is used to determine which variables to eliminate. The
algorithm can be expressed in six lines and is remarkable in both its
simplicity and its ability to find an optimal solution. However it is
inefficient in that it needs to square the updated A matrix after each
variable elimination. To overcome this inefficiency the algorithm is
analyzed and it is shown that the A matrix only needs to be squared
once at the first step of the algorithm and then incrementally updated
for subsequent steps, resulting in significant improvement and an
algorithm complexity of O(n3).
Abstract: UWB is a very attractive technology for many
applications. It provides many advantages such as fine resolution and high power efficiency. Our interest in the current study is the use of
UWB radar technique in microwave medical imaging systems, especially for early breast cancer detection. The Federal Communications Commission FCC allowed frequency bandwidth of
3.1 to 10.6 GHz for this purpose. In this paper we suggest an UWB Bowtie slot antenna with enhanced bandwidth. Effects of varying the geometry of the antenna
on its performance and bandwidth are studied. The proposed antenna
is simulated in CST Microwave Studio. Details of antenna design and
simulation results such as return loss and radiation patterns are discussed in this paper. The final antenna structure exhibits good
UWB characteristics and has surpassed the bandwidth requirements.
Abstract: The culture of riding heavy motorcycles originates
from advanced countries and mainly comes from Europe, North
America, and Japan. Heavy duty motorcycle riders are different from
people who view motorcycles as a convenient mean of transportation.
They regard riding them as a kind of enjoyment and high-level taste.
The activities of riding heavy duty motorcycles have formes a
distinctive landscape in domestic land in Taiwan. Previous studies
which explored motorcycle culture in Taiwan still focused on the
objects of motorcycle engine displacement under 50 cc.. The study
aims to study the heavy duty motorcycles of engine displacement over
550 cc. and explores where their attractiveness is. For finding the
attractiveness of heavy duty motorcycle, the study chooses Miryoku
Engineering (Preference-Based Design) approach. Two steps are
adopted to proceed the research. First, through arranging the letters
obtained from interviewing experts, EGM (The Evaluation Grid
Method) was applied to find out the structure of attractiveness. The
attractive styles are eye-dazzling, leisure, classic, and racing
competitive styles. Secondarily, Quantification Theory Type I analysis
was adopted as a tool for analyzing the importance of attractiveness.
The relationship between style and attractive parts was also discussed.
The results could contribute to the design and research development of
heavy duty motorcycle industry in Taiwan.
Abstract: Milk is a very important nutrient. Low productivity is
a problem of Turkish dairy farming. During recent years, Turkish government has supported cooperatives that assist milk producers and
encouraged farmers to become cooperative members. Turkish
government established several ways to support specially smallholders. For example Ministry of Agriculture and Rural Affairs
(MARA) provided two to four cows to villagers on a grant or loan basis with a long repayment period at low interest rates by
cooperatives. Social Support Project in Rural Areas (SSPRA) is
another support program targeting only disadvantaged people,
especially poor villager. Both programs have a very strong social
support component and similar objectives. But there are minor
differences between them in terms of target people, terms and conditions of the credit supplied Isparta province in Mediterranean region of Turkey is one of the
supported regions. MARA distributed dairy cows to 1072 farmers through 16 agricultural cooperatives in Isparta province in the context
of SSPRA. In this study, economic-social impacts on dairy cattle project
implemented through cooperatives were examined in Isparta. Primary data were collected from 12 cooperatives- president. The
data were obtained by personal interview through a questionnaire and
to cooperatives and given to farms benefiting from the project in
order to reveal the economic and social developments.
Finding of the study revealed that project provided new job
opportunities and improved quality of livestock. It was found that producers who benefited from the project were more willing to
participate in cooperative or other producer organizations.
Abstract: Steel made pipelines with different diameters are used
for transmitting oil and gas which in many cases are buried in soil
under the sea bed or immersed in sea water. External corrosion of
pipes is an important form of deterioration due to the aggressive
environment of sea water. Corrosion normally results in pits. Hence,
using the finite element method, namely ABAQUS software, this
paper estimates the amount of pressure capacity reduction of a pipecontaining
a semi-elliptical pitting corrosion and the rate of corrosion
during the pipeline life of 25 years.
Abstract: This study aims at providing empirical evidence on a
comparison of two equity valuation models: (1) the dividend discount
model (DDM) and (2) the residual income model (RIM), in
estimating equity values of Thai firms during 1995-2004. Results
suggest that DDM and RIM underestimate equity values of Thai
firms and that RIM outperforms DDM in predicting cross-sectional
stock prices. Results on regression of cross-sectional stock prices on
the decomposed DDM and RIM equity values indicate that book
value of equity provides the greatest incremental explanatory power,
relative to other components in DDM and RIM terminal values,
suggesting that book value distortions resulting from accounting
procedures and choices are less severe than forecast and
measurement errors in discount rates and growth rates.
We also document that the incremental explanatory power of book
value of equity during 1998-2004, representing the information
environment under Thai Accounting Standards reformed after the
1997 economic crisis to conform to International Accounting
Standards, is significantly greater than that during 1995-1996,
representing the information environment under the pre-reformed
Thai Accounting Standards. This implies that the book value
distortions are less severe under the 1997 Reformed Thai Accounting
Standards than the pre-reformed Thai Accounting Standards.
Abstract: In this research work, a novel parallel manipulator
with high positioning and orienting rate is introduced. This
mechanism has two rotational and one translational degree of
freedom. Kinematics and Jacobian analysis are investigated.
Moreover, workspace analysis and optimization has been performed
by using genetic algorithm toolbox in Matlab software. Because of
decreasing moving elements, it is expected much more better
dynamic performance with respect to other counterpart mechanisms
with the same degrees of freedom. In addition, using couple of
cylindrical and revolute joints increased mechanism ability to have
more extended workspace.
Abstract: Graph decompositions are vital in the study of combinatorial design theory. Given two graphs G and H, an H-decomposition of G is a partition of the edge set of G into disjoint isomorphic copies of H. An n-sun is a cycle Cn with an edge terminating in a vertex of degree one attached to each vertex. In this paper we have proved that the complete graph of order 2n, K2n can be decomposed into n-2 n-suns, a Hamilton cycle and a perfect matching, when n is even and for odd case, the decomposition is n-1 n-suns and a perfect matching. For an odd order complete graph K2n+1, delete the star subgraph K1, 2n and the resultant graph K2n is decomposed as in the case of even order. The method of building n-suns uses Walecki's construction for the Hamilton decomposition of complete graphs. A spanning tree decomposition of even order complete graphs is also discussed using the labeling scheme of n-sun decomposition. A complete bipartite graph Kn, n can be decomposed into n/2 n-suns when n/2 is even. When n/2 is odd, Kn, n can be decomposed into (n-2)/2 n-suns and a Hamilton cycle.
Abstract: The objective of this study is to identify the factors
that influence the online purchasing loyalty for Thai herbal products.
Survey research is used to gather data from Thai herb online
merchants to assess factors that have impacts on enhancing loyalty.
Data were collected from 300 online customers who had experience
in online purchasing of Thai Herbal products. Prior experience
consists of data from previous usage of online herbs, herb purchase
and internet usage. E-Quality data consists of information quality,
system quality, service quality and the product quality of Thai herbal
products sold online. The results suggest that prior experience, Equality,
attitude toward purchase and trust in online merchant have
major impacts on loyalty. The good attitude and E-Quality of
purchasing Thai herbal product online are the most significant
determinants affecting loyalty.
Abstract: Sport is one of the sectors in which the largest
technical projections regarding the functions of textiles can be found.
He is a large consumer of high performance composite materials and
new fibers. It is one of the sectors where the innovation is the most
important when the greatest numbers of spectacular developments are
aimed at increasing performance. In medicine, textile innovation is
used and contributes in the amelioration of different materials such as
dressing, orthosis, bandages, etc. The hygienic textiles in non-woven
materials record a strong growth. The objective of this study is to
show the different advances of development we obtained in the both
ways (sport and medicine). Polyamide fibers where developed
tacking into account the specification of the high level athlete’s
performance like swimming and triathlon (Olympic Games, Brazil
2016). The first textile utilization was for skiing (Olympic Games,
Sotchi 2014). The different textiles technologies where adapted for
medicine.