Abstract: Thin linear-elastic cylindrical circular shells having a
micro-periodic structure along two directions tangent to the shell
midsurface (biperiodic shells) are object of considerations. The aim
of this paper is twofold. First, we formulate an averaged nonasymptotic
model for the analysis of parametric vibrations or dynamical
stability of periodic shells under consideration, which has constant
coefficients and takes into account the effect of a cell size on the
overall shell behavior (a length-scale effect). This model is derived
employing the tolerance modeling procedure. Second we apply the
obtained model to derivation of frequency equation being a starting
point in the analysis of parametric vibrations. The effect of the microstructure
length oh this frequency equation is discussed.
Abstract: In this work we evaluate the possibility of predicting
the emotional state of a person based on the EEG. We investigate
the problem of classifying valence from EEG signals during
the presentation of affective pictures, utilizing the "frontal EEG
asymmetry" phenomenon. To distinguish positive and negative
emotions, we applied the Common Spatial Patterns algorithm.
In contrast to our expectations, the affective pictures did not
reliably elicit changes in frontal asymmetry. The classifying task
thereby becomes very hard as reflected by the poor classifier
performance. We suspect that the masking of the source of the
brain activity related to emotions, coming mostly from deeper
structures in the brain, and the insufficient emotional engagement
are among main reasons why it is difficult to predict the emotional
state of a person.
Abstract: Sarkhoon gas plant, located in south of Iran, has been installed to removal H2S contained in a high pressure natural gas stream. The solvent used for the H2S removal from gaseous stream is 34% by weight (wt%) Di-ethanol amine (DEA) solutions. Due to increasing concentration of heat stable salt (HSS) in solvent, corrosivity of amine solution had been increased. Reports indicated that there was corrosion on the shell of regeneration column. Because source formation of HSS was unknown, we decided to control the amount of HSS at the limit less than 3% wt amine solvent. Therefore, two small columns were filled by strong anionic base and carbon active, and then polluted amine was passed through beds. Finally a temporary amine recovery package on industrial scale was made based on laboratory’s results. From economical point of view we could save $700000 beside corrosion occurrence of the stripping column has been vigorously decreased.
Abstract: Characterization of radio communication signals aims
at automatic recognition of different characteristics of radio signals in
order to detect their modulation type, the central frequency, and the
level. Our purpose is to apply techniques used in image processing in
order to extract pertinent characteristics. To the single analysis, we
add several rules for checking the consistency of hypotheses using
fuzzy logic. This allows taking into account ambiguity and
uncertainty that may remain after the extraction of individual
characteristics. The aim is to improve the process of radio
communications characterization.
Abstract: Interactive CAD systems have to allocate and
deallocate memory frequently. Frequent memory allocation and
deallocation can play a significant role in degrading application
performance. An application may use memory in a very specific way
and pay a performance penalty for functionality it does not need. We
could counter that by developing specialized memory managers.
Abstract: Considering the merits and limitations of energy dissipation system, seismic isolation system and suspension system, a new earthquake resistant system is proposed and is demonstrated numerically through a frame-core structure. Base isolators and story isolators are installed in the proposed system. The former “isolates" the frame from the foundation and the latter “separates" the frame from the center core. Equations of motion are formulated to study the response of the proposed structural system to strong earthquake motion. As compared with the fixed-base building system, the proposed structural system shows substantial reduction on structural response.
Abstract: Because of the reservoir effect, dynamic analysis of concrete dams is more involved than other common structures. This problem is mostly sourced by the differences between reservoir water, dam body and foundation material behaviors. To account for the reservoir effect in dynamic analysis of concrete gravity dams, two methods are generally employed. Eulerian method in reservoir modeling gives rise to a set of coupled equations, whereas in Lagrangian method, the same equations for dam and foundation structure are used. The Purpose of this paper is to evaluate and study possible advantages and disadvantages of both methods. Specifically, application of the above methods in the analysis of dam-foundationreservoir systems is leveraged to calculate the hydrodynamic pressure on dam faces. Within the frame work of dam- foundationreservoir systems, dam displacement under earthquake for various dimensions and characteristics are also studied. The results of both Lagrangian and Eulerian methods in effects of loading frequency, boundary condition and foundation elasticity modulus are quantitatively evaluated and compared. Our analyses show that each method has individual advantages and disadvantages. As such, in any particular case, one of the two methods may prove more suitable as presented in the results section of this study.
Abstract: Chemical reaction and diffusion are important phenomena in quantitative neurobiology and biophysics. The knowledge of the dynamics of calcium Ca2+ is very important in cellular physiology because Ca2+ binds to many proteins and regulates their activity and interactions Calcium waves propagate inside cells due to a regenerative mechanism known as calcium-induced calcium release. Buffer-mediated calcium diffusion in the cytosol plays a crucial role in the process. A mathematical model has been developed for calcium waves by assuming the buffers are in equilibrium with calcium i.e., the rapid buffering approximation for a one dimensional unsteady state case. This model incorporates important physical and physiological parameters like dissociation rate, diffusion rate, total buffer concentration and influx. The finite difference method has been employed to predict [Ca2+] and buffer concentration time course regardless of the calcium influx. The comparative studies of the effect of the rapid buffered diffusion and kinetic parameters of the model on the concentration time course have been performed.
Abstract: The amount of urban artificial heat which affects the
urban temperature rise in urban meteorology was investigated in order
to clarify the relationships between urbanization and urban
meteorology in this study.
The results of calculation to identify how urban temperate was
increased through the establishment of a model for measuring the
amount of urban artificial heat and theoretical testing revealed that the
amount of urban artificial heat increased urban temperature by plus or
minus 0.23 ˚ C in 2007 compared with 1996, statistical methods
(correlation and regression analysis) to clarify the relationships
between urbanization and urban weather were as follows.
New design techniques and urban growth management are
necessary from urban growth management point of view suggested
from this research at city design phase to decrease urban temperature
rise and urban torrential rain which can produce urban disaster in terms
of urban meteorology by urbanization.
Abstract: The Minimal Residual (MR) is modified for adaptive
filtering application. Three forms of MR based algorithm are
presented: i) the low complexity SPCG, ii) MREDSI, and iii)
MREDSII. The low complexity is a reduced complexity version of a
previously proposed SPCG algorithm. Approximations introduced
reduce the algorithm to an LMS type algorithm, but, maintain the
superior convergence of the SPCG algorithm. Both MREDSI and
MREDSII are MR based methods with Euclidean direction of search.
The choice of Euclidean directions is shown via simulation to give
better misadjustment compared to their gradient search counterparts.
Abstract: Nowadays, power systems, energy generation by wind
has been very important. Noting that the production of electrical
energy by wind turbines on site to several factors (such as wind speed
and profile site for the turbines, especially off the wind input speed,
wind rated speed and wind output speed disconnect) is dependent. On
the other hand, several different types of turbines in the market there.
Therefore, selecting a turbine that its capacity could also answer the
need for electric consumers the efficiency is high something is
important and necessary. In this context, calculating the amount of
wind power to help optimize overall network, system operation, in
determining the parameters of wind power is very important.
In this article, to help calculate the amount of wind power plant,
connected to the national network in the region Manjil wind,
selecting the best type of turbine and power delivery profile
appropriate to the network using Monte Carlo method has been.
In this paper, wind speed data from the wind site in Manjil, as minute
and during the year has been. Necessary simulations based on
Random Numbers Simulation method and repeat, using the software
MATLAB and Excel has been done.
Abstract: This paper introduces a new approach for the performance
analysis of adaptive filter with error saturation nonlinearity in
the presence of impulsive noise. The performance analysis of adaptive
filters includes both transient analysis which shows that how fast
a filter learns and the steady-state analysis gives how well a filter
learns. The recursive expressions for mean-square deviation(MSD)
and excess mean-square error(EMSE) are derived based on weighted
energy conservation arguments which provide the transient behavior
of the adaptive algorithm. The steady-state analysis for co-related
input regressor data is analyzed, so this approach leads to a new
performance results without restricting the input regression data to
be white.
Abstract: The internet has become an attractive avenue for
global e-business, e-learning, knowledge sharing, etc. Due to
continuous increase in the volume of web content, it is not practically
possible for a user to extract information by browsing and integrating
data from a huge amount of web sources retrieved by the existing
search engines. The semantic web technology enables advancement
in information extraction by providing a suite of tools to integrate
data from different sources. To take full advantage of semantic web,
it is necessary to annotate existing web pages into semantic web
pages. This research develops a tool, named OWIE (Ontology-based
Web Information Extraction), for semantic web annotation using
domain specific ontologies. The tool automatically extracts
information from html pages with the help of pre-defined ontologies
and gives them semantic representation. Two case studies have been
conducted to analyze the accuracy of OWIE.
Abstract: In this paper processes including large deformations of a rubber with hyperelastic material behavior are simulated by the RKPM method. Due to the loss of kronecker delta properties in the mesh less shape functions, the imposition of essential boundary conditions consumes significant CPU time in mesh free computations. In this work transformation method is used for imposition of essential boundary conditions. A RKPM material shape function is used in this analysis. The support of the material shape functions covers the same set of particles during material deformation and hence the transformation matrix is formed only once at the initial stages. A computer program in MATLAB is developed for simulations.
Abstract: This study aims at using multi-source data to monitor
coral biodiversity and coral bleaching. We used coral reef at Racha
Islands, Phuket as a study area. There were three sources of data:
coral diversity, sensor based data and satellite data.
Abstract: Lean, which was initially developed by Toyota, is
widely implemented in other companies to improve competitiveness.
This research is an attempt to identify the adoption of lean in the
production system of Malaysian car manufacturer, Proton using case
study approach. To gain the in-depth information regarding lean
implementation, an activity on the assembly line called Set Parts
Supply (SPS) was studied. The result indicates that by using lean
principles, tools and techniques in the implementation of SPS enabled
to achieve the goals on safety, quality, cost, delivery and morale. The
implementation increased the size of the workspace, improved the
quality of assembly and the delivery of parts supply, reduced the
manpower, achieved cost savings on electricity and also increased the
motivation of manpower in respect of attendance at work. A
framework of SPS implementation is suggested as a contribution for
lean practices in production system.
Abstract: In this paper we present an approach for 3D face
recognition based on extracting principal components of range
images by utilizing modified PCA methods namely 2DPCA and
bidirectional 2DPCA also known as (2D) 2 PCA.A preprocessing
stage was implemented on the images to smooth them using median
and Gaussian filtering. In the normalization stage we locate the nose
tip to lay it at the center of images then crop each image to a standard
size of 100*100. In the face recognition stage we extract the principal
component of each image using both 2DPCA and (2D) 2 PCA.
Finally, we use Euclidean distance to measure the minimum distance
between a given test image to the training images in the database. We
also compare the result of using both methods. The best result
achieved by experiments on a public face database shows that 83.3
percent is the rate of face recognition for a random facial expression.
Abstract: In this paper, we consider a new particle filter inspired
by biological evolution. In the standard particle filter, a resampling
scheme is used to decrease the degeneracy phenomenon and improve
estimation performance. Unfortunately, however, it could cause the
undesired the particle deprivation problem, as well. In order to
overcome this problem of the particle filter, we propose a novel
filtering method called the genetic filter. In the proposed filter, we
embed the genetic algorithm into the particle filter and overcome the
problems of the standard particle filter. The validity of the proposed
method is demonstrated by computer simulation.
Abstract: Modular fixtures (MFs) are very important tools in
manufacturing processes in terms of reduction the cost and the
production time. This paper introduces an automated approach for
assembling MFs elements by employing SolidWorks as a powerful
3D CAD software. Visual Basic (VB) programming language was
applied integrating with SolidWorks API (Application programming
interface) functions. This integration allowed creating plug-in file and
generating new menus in the SolidWorks environment. The menus
allow the user to select, insert, and assemble MFs elements.
Abstract: The objective of this research is to study the people’s level of participation in activities of the community, their satisfaction towards the community, the attachment they have to the community, factors that influence the attachment, as well as the characteristics of the relationships of military families’ of the Royal Guards community of Dusit District. The method used was non-probability sampling by quota sampling according to people’s age. The determined age group was 18 years or older.
One set of a sample group was done per family. The questionnaires were conducted by 287 people. Snowball sampling was also used by interviewing people of the community, starting from the Royal Guards Community’s leader, then by 20 of the community’s well-respected persons. The data was analyzed by using descriptive statistics, such as arithmetic mean and standard deviation, as well as by inferential statistics, such as Independent - Samples T test (T-test), One-Way ANOVA (F-test), Chi-Square. Descriptive analysis according to the structure of the interview content was also used. The results of the research is that the participation of the population in the Royal Guards Community in various activities is at a medium level, with the average participation level during Mother’s and Father’s Days. The people’s general level of satisfaction towards the premises of the Royal Guards Community is at the highest level.
The people were most satisfied with the transportation within the community and in contacting with people from outside the premises. The access to the community is convenient and there are various entrances. The attachment of the people to the Royal Guards Community in general and by each category is at a high level. The feeling that the community is their home rated the highest average. Factors that influence the attachment of the people of the Royal Guards Community are age, status, profession, income, length of stay in the community, membership of social groups, having neighbors they feel close and familiar with, and as well as the benefits they receive from the community. In addition, it was found that people that participate in activities have a high level of positive relationship towards the attachment of the people to the Royal Guards Community. The satisfaction of the community has a very high level of positive relationship with the attachment of the people to the Royal Guards Community.
The characteristics of the attachment of military families’ is that they live in big houses that everyone has to protect and care for, starting from the leader of the family as well as all members. Therefore, they all love the community they live in. The characteristics that show the participation of activities within the community and the high level of satisfaction towards the premises of the community will enable the people to be more attached to the community. The people feel that everyone is close neighbors within the community, as if they are one big family.