Abstract: Heat source addition to the axisymmetric supersonic
inlet may improve the performance parameters, which will increase
the inlet efficiency. In this investigation the heat has been added to
the flow field at some distance ahead of an axisymmetric inlet by
adding an imaginary thermal source upstream of cowl lip. The effect
of heat addition on the drag coefficient, mass flow rate and the
overall efficiency of the inlet have been investigated. The results
show that heat addition causes flow separation, hence to prevent this
phenomena, roughness has been added on the spike surface.
However, heat addition reduces the drag coefficient and the inlet
mass flow rate considerably. Furthermore, the effects of position,
size, and shape on the inlet performance were studied. It is found that
the thermal source deflects the flow streamlines. By improper
location of the thermal source, the optimum condition has been
obtained. For the optimum condition, the drag coefficient is
considerably reduced and the inlet mass flow rate and its efficiency
have been increased slightly. The optimum shape of the heat source
is obtained too.
Abstract: The designing of charge pump with high gain Op-
Amp is a challenging task for getting faithful response .Design of
high performance phase locked loop require ,a design of high
performance charge pump .We have designed a operational amplifier
for reducing the error caused by high speed glitch in a transistor and
mismatch currents . A separate Op-Amp has designed in 180 nm
CMOS technology by CADENCE VIRTUOSO tool. This paper
describes the design of high performance charge pump for GHz
CMOS PLL targeting orthogonal frequency division multiplexing
(OFDM) application. A high speed low power consumption Op-Amp
with more than 500 MHz bandwidth has designed for increasing the
speed of charge pump in Phase locked loop.
Abstract: The aim of the work was to attenuate the vibration amplitude in CESNA 172 airplane wing by using Functionally Graded Material instead of uniform or composite material. Wing strength was achieved by means of stress analysis study, while wing vibration amplitudes and shapes were achieved by means of Modal and Harmonic analysis. Results were verified by applying the methodology in a simple cantilever plate to the simple model and the results were promising and the same methodology can be applied to the airplane wing model. Aluminum models, Titanium models, and functionally graded materials of Aluminum and titanium results were compared to show a great vibration attenuation after using the FGM. Optimization in FGM gradation satisfied our objective of reducing and attenuating the vibration amplitudes to show the effect of using FGM in vibration behavior. Testing the Aluminum rich models, and comparing it with the titanium rich model was an optimization in this paper. Results have shown a significant attenuation in vibration magnitudes when using FGM instead of Titanium Plate, and Aluminium wing with FGM Spurs instead of Aluminium wings. It was also recommended that in future, changing the graphical scale to 1:10 or even 1:1 when the computers- capabilities allow.
Abstract: A phorbol-12-myristate-13-acetate (TPA) is a synthetic analogue of phorbol ester (PE), a natural toxic compound of Euphorbiaceae plant. The oil extracted from plants of this family is useful source for primarily biofuel. However this oil might also be used as a foodstuff due to its significant nutrition content. The limitations for utilizing the oil as a foodstuff are mainly due to a toxicity of PE. Currently, a majority of PE detoxification processes are expensive as include multi steps alcohol extraction sequence.
Ozone is considered as a strong oxidative agent. It reacts with PE by attacking the carbon-carbon double bond of PE. This modification of PE molecular structure yields a non toxic ester with high lipid content.
This report presents data on development of simple and cheap PE detoxification process with water application as a buffer and ozone as reactive component. The core of this new technique is an application for a new microscale plasma unit to ozone production and the technology permits ozone injection to the water-TPA mixture in form of microbubbles.
The efficacy of a heterogeneous process depends on the diffusion coefficient which can be controlled by contact time and interfacial area. The low velocity of rising microbubbles and high surface to volume ratio allow efficient mass transfer to be achieved during the process. Direct injection of ozone is the most efficient way to process with such highly reactive and short lived chemical.
Data on the plasma unit behavior are presented and the influence of gas oscillation technology on the microbubble production mechanism has been discussed. Data on overall process efficacy for TPA degradation is shown.
Abstract: This paper is aimed to study the roles of leadership and innovation in the development of local people based ecotourism
services. The survey is conducted in Candirejo village, Borobudur District, Magelang Regency. The study of a descriptive approach is employed to identify people's behavior in ecotourism services. The results showed that ecotourism services have developed and provided benefits to the people. The roles of leadership and innovation interact positively with a cooperative to organize an ecotourism services management. The leadership is able to identify substances, to do the vision and missions of environmental and cultural conservation. The innovation provides alternative development efforts and increases the added value of ecotourism. The cooperative management was able to support a process to realize the goals of ecotourism, to build participation and communication, and to perform organizational learning. The phenomenon of the leadership in the Candirejo ecotourism enriches the studies of the ecotourism management. During this time, the ecotourism management is always associated
with the standard management of national park. The ecotourism management of Candirejo is considered successful even outside the national park management.
Abstract: The present investigation aimed to study the
histomorphometric characterizations of the thyroid gland of the duck.
Five adult male and five adult female ducks were used in the
experiment. Results showed that the overall histological structure of
the thyroid gland of the duck were similar to those of the other
vertebrae. The gland consisted of roughly spherical randomly
distributed micro and macrofollicles with very little interstitial tissue
between them. Each follicle is lined by a single layer of epithelial
cells enclosing a cavity, the follicular cavity, which is filled with
colloid. Ultrastructural findings showed that the apical surface of the
follicular cells bears a variable number of short, irregularly
distributed microvilli which are apparently more numerous on the
columnar cells than on the lower, relatively inactive cells.
Mitochondria and rough endoplasmic reticulum occupy the
subnuclear region of the follicular cell, whereas the Golgi complex,
free ribosomes and colloid droplets were found in the apical
cytoplasm. At light or electron microscopic levels, there was no sex
difference in histomorphometric characteristics of the thyroid
glands.ls.
Abstract: In films, visual effects have played the role of
expressing realities more realistically or describing imaginations as if
they are real. Such images are immediated images representing
realism, and the logic of immediation for the reality of images has
been perceived dominant in visual effects. In order for immediation to
have an identity as immediation, there should be the opposite concept
hypermediation.
In the mid 2000s, hypermediated images were settled as a code of
mass culture in Asia. Thus, among Asian films highly popular in those
days, this study selected five displaying hypermediated images – 2 Korean, 2 Japanese, and 1 Thailand movies – and examined the
semiotic meanings of such images using Roland Barthes- directional and implicated meaning analysis and Metz-s paradigmatic analysis
method, focusing on how hypermediated images work in the general
context of the films, how they are associated with spaces, and what
meanings they try to carry.
Abstract: Feeder is one of the airships of the Multibody Advanced Airship for Transport (MAAT) system, under development within the EU FP7 project. MAAT is based on a modular concept composed of two different parts that have the possibility to join; respectively they are the so-called Cruiser and Feeder, designed on the lighter than air principle. Feeder, also named ATEN (Airship Transport Elevator Network), is the smaller one which joins the bigger one, Cruiser, also named PTAH (Photovoltaic modular Transport Airship for High altitude),envisaged to happen at 15km altitude. During the MAAT design phase, the aerodynamic studies of the both airships and their interactions are analyzed. The objective of these studies is to understand the aerodynamic behavior of all the preselected configurations, as an important element in the overall MAAT system design. The most of these configurations are only simulated by CFD, while the most feasible one is experimentally analyzed in order to validate and thrust the CFD predictions. This paper presents the numerical and experimental investigation of the Feeder “conical like" shape configuration. The experiments are focused on the aerodynamic force coefficients and the pressure distribution over the Feeder outer surface, while the numerical simulation cover also the analysis of the velocity and pressure distribution. Finally, the wind tunnel experiment is compared with its CFD model in order to validate such specific simulations with respective experiments and to better understand the difference between the wind tunnel and in-flight circumstances.
Abstract: By taking advantage of computer-s processing power, an unlimited number of variations and parameters in both spatial and environmental can be provided while following the same set of rules and constraints. This paper focuses on using the tools of parametric urbanism towards a more responsive environmental and sustainable urban morphology. It presents an understanding to Parametric Urban Comfort Envelope (PUCE) as an interactive computational assessment urban model. In addition, it investigates the applicability potentials of this model to generate an optimized urban form to Borg El Arab city (a new Egyptian Community) concerning the human comfort values specially wind and solar envelopes. Finally, this paper utilizes its application outcomes -both visual and numerical- to extend the designer-s limitations by decrease the concern of controlling and manipulation of geometry, and increase the designer-s awareness about the various potentials of using the parametric tools to create relationships that generate multiple geometric alternatives.
Abstract: The intermittent connectivity modifies the “always
on" network assumption made by all the distributed query processing
systems. In modern- day systems, the absence of network
connectivity is considered as a fault. Since the last upload, it might
not be feasible to transmit all the data accumulated right away over
the available connection. It is possible that vital information may be
delayed excessively when the less important information takes place
of the vital information. Owing to the restricted and uneven
bandwidth, it is vital that the mobile nodes make the most
advantageous use of the connectivity when it arrives. Hence, in order
to select the data that needs to be transmitted first, some sort of data
prioritization is essential. A continuous query processing system for
intermittently connected mobile networks that comprises of a delaytolerant
continuous query processor distributed across the mobile
hosts has been proposed in this paper. In addition, a mechanism for
prioritizing query results has been designed that guarantees enhanced
accuracy and reduced delay. It is illustrated that our architecture
reduces the client power consumption, increases query efficiency by
the extensive simulation results.
Abstract: Optical network uses a tool for routing which is called
Latin router. These routers use particular algorithms for routing. In this paper, we present algorithm for configuration of optical network that is optimized regarding previous algorithm. We show that by decreasing the number of hops for source-destination in lightpath number of satisfied request is less. Also we had shown that more than
single-hop lightpath relating single-hop lightpath is better.
Abstract: An optimal solution for a large number of constraint
satisfaction problems can be found using the technique of
substitution and elimination of variables analogous to the technique
that is used to solve systems of equations. A decision function
f(A)=max(A2) is used to determine which variables to eliminate. The
algorithm can be expressed in six lines and is remarkable in both its
simplicity and its ability to find an optimal solution. However it is
inefficient in that it needs to square the updated A matrix after each
variable elimination. To overcome this inefficiency the algorithm is
analyzed and it is shown that the A matrix only needs to be squared
once at the first step of the algorithm and then incrementally updated
for subsequent steps, resulting in significant improvement and an
algorithm complexity of O(n3).
Abstract: UWB is a very attractive technology for many
applications. It provides many advantages such as fine resolution and high power efficiency. Our interest in the current study is the use of
UWB radar technique in microwave medical imaging systems, especially for early breast cancer detection. The Federal Communications Commission FCC allowed frequency bandwidth of
3.1 to 10.6 GHz for this purpose. In this paper we suggest an UWB Bowtie slot antenna with enhanced bandwidth. Effects of varying the geometry of the antenna
on its performance and bandwidth are studied. The proposed antenna
is simulated in CST Microwave Studio. Details of antenna design and
simulation results such as return loss and radiation patterns are discussed in this paper. The final antenna structure exhibits good
UWB characteristics and has surpassed the bandwidth requirements.
Abstract: The culture of riding heavy motorcycles originates
from advanced countries and mainly comes from Europe, North
America, and Japan. Heavy duty motorcycle riders are different from
people who view motorcycles as a convenient mean of transportation.
They regard riding them as a kind of enjoyment and high-level taste.
The activities of riding heavy duty motorcycles have formes a
distinctive landscape in domestic land in Taiwan. Previous studies
which explored motorcycle culture in Taiwan still focused on the
objects of motorcycle engine displacement under 50 cc.. The study
aims to study the heavy duty motorcycles of engine displacement over
550 cc. and explores where their attractiveness is. For finding the
attractiveness of heavy duty motorcycle, the study chooses Miryoku
Engineering (Preference-Based Design) approach. Two steps are
adopted to proceed the research. First, through arranging the letters
obtained from interviewing experts, EGM (The Evaluation Grid
Method) was applied to find out the structure of attractiveness. The
attractive styles are eye-dazzling, leisure, classic, and racing
competitive styles. Secondarily, Quantification Theory Type I analysis
was adopted as a tool for analyzing the importance of attractiveness.
The relationship between style and attractive parts was also discussed.
The results could contribute to the design and research development of
heavy duty motorcycle industry in Taiwan.
Abstract: Milk is a very important nutrient. Low productivity is
a problem of Turkish dairy farming. During recent years, Turkish government has supported cooperatives that assist milk producers and
encouraged farmers to become cooperative members. Turkish
government established several ways to support specially smallholders. For example Ministry of Agriculture and Rural Affairs
(MARA) provided two to four cows to villagers on a grant or loan basis with a long repayment period at low interest rates by
cooperatives. Social Support Project in Rural Areas (SSPRA) is
another support program targeting only disadvantaged people,
especially poor villager. Both programs have a very strong social
support component and similar objectives. But there are minor
differences between them in terms of target people, terms and conditions of the credit supplied Isparta province in Mediterranean region of Turkey is one of the
supported regions. MARA distributed dairy cows to 1072 farmers through 16 agricultural cooperatives in Isparta province in the context
of SSPRA. In this study, economic-social impacts on dairy cattle project
implemented through cooperatives were examined in Isparta. Primary data were collected from 12 cooperatives- president. The
data were obtained by personal interview through a questionnaire and
to cooperatives and given to farms benefiting from the project in
order to reveal the economic and social developments.
Finding of the study revealed that project provided new job
opportunities and improved quality of livestock. It was found that producers who benefited from the project were more willing to
participate in cooperative or other producer organizations.
Abstract: Steel made pipelines with different diameters are used
for transmitting oil and gas which in many cases are buried in soil
under the sea bed or immersed in sea water. External corrosion of
pipes is an important form of deterioration due to the aggressive
environment of sea water. Corrosion normally results in pits. Hence,
using the finite element method, namely ABAQUS software, this
paper estimates the amount of pressure capacity reduction of a pipecontaining
a semi-elliptical pitting corrosion and the rate of corrosion
during the pipeline life of 25 years.
Abstract: This study aims at providing empirical evidence on a
comparison of two equity valuation models: (1) the dividend discount
model (DDM) and (2) the residual income model (RIM), in
estimating equity values of Thai firms during 1995-2004. Results
suggest that DDM and RIM underestimate equity values of Thai
firms and that RIM outperforms DDM in predicting cross-sectional
stock prices. Results on regression of cross-sectional stock prices on
the decomposed DDM and RIM equity values indicate that book
value of equity provides the greatest incremental explanatory power,
relative to other components in DDM and RIM terminal values,
suggesting that book value distortions resulting from accounting
procedures and choices are less severe than forecast and
measurement errors in discount rates and growth rates.
We also document that the incremental explanatory power of book
value of equity during 1998-2004, representing the information
environment under Thai Accounting Standards reformed after the
1997 economic crisis to conform to International Accounting
Standards, is significantly greater than that during 1995-1996,
representing the information environment under the pre-reformed
Thai Accounting Standards. This implies that the book value
distortions are less severe under the 1997 Reformed Thai Accounting
Standards than the pre-reformed Thai Accounting Standards.
Abstract: The objective of this study is to identify the factors
that influence the online purchasing loyalty for Thai herbal products.
Survey research is used to gather data from Thai herb online
merchants to assess factors that have impacts on enhancing loyalty.
Data were collected from 300 online customers who had experience
in online purchasing of Thai Herbal products. Prior experience
consists of data from previous usage of online herbs, herb purchase
and internet usage. E-Quality data consists of information quality,
system quality, service quality and the product quality of Thai herbal
products sold online. The results suggest that prior experience, Equality,
attitude toward purchase and trust in online merchant have
major impacts on loyalty. The good attitude and E-Quality of
purchasing Thai herbal product online are the most significant
determinants affecting loyalty.
Abstract: Sport is one of the sectors in which the largest
technical projections regarding the functions of textiles can be found.
He is a large consumer of high performance composite materials and
new fibers. It is one of the sectors where the innovation is the most
important when the greatest numbers of spectacular developments are
aimed at increasing performance. In medicine, textile innovation is
used and contributes in the amelioration of different materials such as
dressing, orthosis, bandages, etc. The hygienic textiles in non-woven
materials record a strong growth. The objective of this study is to
show the different advances of development we obtained in the both
ways (sport and medicine). Polyamide fibers where developed
tacking into account the specification of the high level athlete’s
performance like swimming and triathlon (Olympic Games, Brazil
2016). The first textile utilization was for skiing (Olympic Games,
Sotchi 2014). The different textiles technologies where adapted for
medicine.
Abstract: In the present work, an attempt is made to understand
electromagnetic field confinement in a subwavelength waveguide
structure using concepts of quantum mechanics. Evanescent field in
the waveguide is looked as inability of the photon to get confined in
the waveguide core and uncertainty of position is assigned to it. The
momentum uncertainty is calculated from position uncertainty.
Schrödinger wave equation for the photon is written by incorporating
position-momentum uncertainty. The equation is solved and field
distribution in the waveguide is obtained. The field distribution and
power confinement is compared with conventional waveguide theory.
They were found in good agreement with each other.