Numerical Simulation of Flow Past an Infinite Row of Equispaced Square Cylinders Using the Multi- Relaxation-Time Lattice Boltzmann Method

In this research numerical simulations are performed, using the multi-relaxation-time lattice Boltzmann method, in the range 3 ≤ β = w[d] ≤ 30 at Re = 100, 200 and 300, where β the blockage ratio, w is the equispaced distance between centers of cylinders, d is the diameter of the cylinder and Re is the Reynolds number, respectively. Special attention is paid to the effect of the equispaced distance between centers of cylinders. Visualization of the vorticity contour visualization are presented for some simulation showing the flow dynamics and patterns for blockage effect. Results show that the drag and mean drag coefficients, and Strouhal number, in general, decrease with the increase of β for fixed Re. It is found that the decreasing rate of drag and mean drag coefficients and Strouhal number is more distinct in the range 3 ≤ β ≤ 15. We found that when β > 15, the blockage effect almost diminishes. Our results further indicate that the drag and mean drag coefficients, peak value of the lift coefficient, root-mean-square value of the lift and drag coefficients and the ratio between lift and drag coefficients decrease with the increase of Re. The results indicate that symmetry boundary condition have more blockage effect as compared to periodic boundary condition.




References:
[1] M. Cheng, and P. M. Moretti, “Experimental study of the flow field
downstream of a single tube row,” Experimental Thermal Fluid Science,
vol.1, 1988, pp. 69-74.
[2] A. Okajima, “Strouhal numbers of rectangular cylinders,” Journal of
Fluid Mechanics, Cambridge, U.K. vol. 123, 1982, pp. 379-398.
[3] R. W. Davis, E. F. Moore, and L. P. Purtell, “A numerical experimental
study of confined flow around rectangular cylinders,” Physics of Fluids,
Part A, vol. 27, 1984, pp. 46-59.
[4] R. Franke, W. Rodi, and B. Schonung, “Numerical calculation of
Laminar Vortex Shedding flow past cylinders,” Journal of Wind
Engineering and Industrial Aerodynamics, vol. 35, 1990, pp. 237-257.
[5] A. Sohankar, L. Davidson, and C. Norberg, “Numerical simulation of
unsteady flow around a square two-dimensional cylinder,” Twelfth
Australian Fluid Mechanics Conference, The University of Sydney,
Australia. 1995, pp. 517-520.
[6] A. Sohankar, C. Norberg, and L. Davidson, “Simulation of threedimensional
flow around a square cylinder at moderate Reynolds
numbers,” Physics of Fluids. vol.11, 1999, pp. 288-306.
[7] A. K. Saha, K. Muralidhar, and G. Biswas, “Transition and Chaos in
two-dimensional flow past a square cylinder,” Journal of Engineering
Mechanics, vol.126, 1999, pp. 523-532.
[8] D. B. Ingham, T. Tang, and B. R. Morton, “Steady two-dimensional
flow through a row of normal flat plates,” Journal of Fluid Mechanics,
vol. 210, 1990, pp.281-302.
[9] B. Fornberg, “Steady incompressible flow past a row of circular
cylinders,” Journal of Fluid Mechanics, vol. 225, 1991, pp. 655-678.
[10] D. B. Ingham, and B. Yan, “Fluid flow around cascades,” Zangew
Mathematical Physics, vol. 44, 1993.
[11] R. Natarajan., B. Fornberg, and A. Acrivos, “Flow past a row of flat
plates at large Reynolds numbers,” Proceedings of Royal Society
London A, vol. 441, 1993, pp. 211-235.
[12] S. R. Kumar., A. Sharma., and A. Agarwall, “Simulation of flow around
a row of square cylinders,” Journal of Fluid Mechanics, vol. 606, 2008,
pp.369-397.
[13] S. U. Islam and C. Y. Zhou, “Numerical simulation of flow around a
row of circular cylinders using the lattice Boltzmann method,”
Information Technology Journal, vol.8. , 2009, pp. 513-520.
[14] S. Ul. Islam, H. Rahman, and W. S. Abbasi, “Grid independence study
of flow past a square cylinder using the multi-relaxation-time lattice
Boltzmann method,” International Journal of Mathematical,
Computational, Physical and Quantum Engineering, World Academy of
Science, Engineering and Technology, vol. 8, 2014, pp. 972-982.
[15] S. Ul. Islam, W. S. Abbasi, and H. Rahman, “Force statistics and wake
structure mechanism of flow around a square cylinder at low Reynolds
numbers,” International Journal of Mechanical, Aerospace, Industrial
and Mechatronics Engineering, vol. 8, 2014, pp. 1397-1403.
[16] Y. Dazchi, M. Renwei, L. S. Luo, and S. Wei, “Viscous flow
computations with the method of lattice Boltzmann equation,” Progress
in Aerospace Sciences, vol. 39, 2003, pp. 329-367.