Some Studies on Temperature Distribution Modeling of Laser Butt Welding of AISI 304 Stainless Steel Sheets

In this research work, investigations are carried out on
Continuous Wave (CW) Nd:YAG laser welding system after
preliminary experimentation to understand the influencing parameters
associated with laser welding of AISI 304. The experimental
procedure involves a series of laser welding trials on AISI 304
stainless steel sheets with various combinations of process parameters
like beam power, beam incident angle and beam incident angle. An
industrial 2 kW CW Nd:YAG laser system, available at Welding
Research Institute (WRI), BHEL Tiruchirappalli, is used for
conducting the welding trials for this research. After proper tuning of
laser beam, laser welding experiments are conducted on AISI 304
grade sheets to evaluate the influence of various input parameters on
weld bead geometry i.e. bead width (BW) and depth of penetration
(DOP). From the laser welding results, it is noticed that the beam
power and welding speed are the two influencing parameters on
depth and width of the bead. Three dimensional finite element
simulation of high density heat source have been performed for laser
welding technique using finite element code ANSYS for predicting
the temperature profile of laser beam heat source on AISI 304
stainless steel sheets. The temperature dependent material properties
for AISI 304 stainless steel are taken into account in the simulation,
which has a great influence in computing the temperature profiles.
The latent heat of fusion is considered by the thermal enthalpy of
material for calculation of phase transition problem. A Gaussian
distribution of heat flux using a moving heat source with a conical
shape is used for analyzing the temperature profiles. Experimental
and simulated values for weld bead profiles are analyzed for stainless
steel material for different beam power, welding speed and beam
incident angle. The results obtained from the simulation are
compared with those from the experimental data and it is observed
that the results of numerical analysis (FEM) are in good agreement
with experimental results, with an overall percentage of error
estimated to be within ±6%.

• N. Siva Shanmugam
• G. Buvanashekaran
• K. Sankaranarayanasamy

• Laser welding
• Butt weld
• 304 SS
• FEM.

<p>[1] J.F. Ready and D.F. Farson, &ldquo;LIA Handbook of Laser Materials
Processing&rdquo;, 1st ed., Magnolia Publishing, Laser Institute of America,
2001.
[2] S.A. Tsirkas, P. Papanikos and Th. Kermanidis, &ldquo;Numerical simulation
of the laser welding process in butt-joint specimens&rdquo;, Journal of
Materials Processing Technology, 134, pp 59-69, 2003.
[3] D. Rosenthal, &ldquo;The Theory of Moving Source of Heat and it&rsquo;s
Application to Metal Treatment&rdquo;, Trans. ASME, 68, pp. 849&ndash;866, 1946.
[4] D.T.S. Hook and A.E.F. Gick, &ldquo;Penetration welding with lasers&rdquo;,
Welding Research Supplement, pp. 492s-498s, 1973
[5] M. Lax, &ldquo;Temperature rise induced by a laser beam&rdquo;, Journal of Applied
Physics, 48, pp. 3919-3924, 1977.
[6] J. Dowden, M. Davis and P. Kapadia, &ldquo;Some aspects of the fluid
dynamics of laser welding&rdquo;, Journal of Fluid Mechanics, 126, pp. 123-
146, 1983.
[7] R. Brockmann, K. Dickmann, P. Geshev and K. J. Matthes, &ldquo;Calculation
of temperature field in a thin moving sheet heated with laser beam&rdquo;,
International Journal of Heat and Mass Transfer, 46, pp. 717-723, 2003.
[8] A. Mahrle and J. Schmidt, &ldquo;The influence of fluid flow phenomena on
the laser welding process&rdquo;, International Journal of Heat and Fluid
Flow, 23, 288-297, 2002.
[9] A.P. Mackwood and R.C. Crafer, &ldquo;Thermal modelling of laser welding
and related processes: literature review&rdquo;, Optics &amp; Laser Technology,
37(2), pp. 99&ndash;115, 2005
[10] K.Y. Benyounis, A.G. Olabi and M.S.J. Hashmi, &ldquo;Effect of laser
welding parameters on the heat input and weld-bead profile&rdquo;, Journal of
Materials Processing Technology, 164&ndash;165, pp. 978&ndash;985, 2005.
[11] H. GuoMing, Z. Jian and L. JianQang, &ldquo;Dynamic simulation of the
temperature field of stainless steel laser welding&rdquo;, Materials &amp; Design,
28(1), pp. 240-245, 2007.
[12] D. Radaj, &ldquo;Heat Effects of Welding, Temperature Field, Residual Stress,
Distortion&rdquo;, Springer-Verlag, Berlin, Heidelberg, New York, London,
Paris, Tokyo, 1992.
[13] Z. Ji and S. Wu, &ldquo;FEM Simulation of the temperature field during the
laser forming of sheet metal&rdquo;, Journal of Materials Processing
Technology, 74(1-3), pp. 89-95, 1998.
[14] J. Sabbaghzadeh, M. Azizi and M.J. Torkamany, &ldquo;Numerical and
experimental investigation of seam welding with a pulsed laser&rdquo;,
Journal of Optics &amp; Laser Technology, 40, pp. 289-296, 2008.
[15] W.S. Chang and S.J. Na, &ldquo;Prediction of laser spot weld shape by
numerical analysis and neural network&rdquo;, Metallurgical and Material
Transactions B, 32B, pp 723-731, August 2001.
[16] C.S. Wu, H.G. Wang and Y.M. Zhang, &ldquo;A New Heat Source Model for
Keyhole Plasma Arc Welding in FEM Analysis of the Temperature
Profile&rdquo;, Welding Journal, 85(12), pp. 284s-291s, 2006.
[17] J. Xie and A. Kar, &ldquo;Laser Welding of Thin Sheet Steel with Surface
Oxidation&rdquo;, Welding Research Supplement, 78, pp. 343s &ndash; 348s, 1999.
[18] C. Carmignani, R. Mares and G. Toselli, &ldquo;Transient finite element
analysis of deep penetration laser welding process in a singlepass buttwelded
thick steel plate&rdquo;, Journal of Computational Methods in Applied
Mechanics and Engineering, 179, pp. 197-124, 1999.
[19] W.R. Harp, A.G. Paleocrassas and J.F. Tu, &ldquo;A Practical method for
determining the beam profile near the focal spot&rdquo;, International Journal
of Advanced Manufacturing Technology, 37(11-12), pp. 1113-1119.
2007.
[20] ANSYS&reg; Release 9.0 Documentation Chapter 3.9 Phase Change (data
accessed on 29.01.2009)
[21] M.R. Frewin and D.A. Scott, &ldquo;Finite Element Model of Pulsed Laser
Welding&rdquo;, Welding Research Supplement, 78, 15s-22s, 1999.</p>