Numerical Analysis of Laminar to Turbulent Transition on the DU91-W2-250 Airfoil

This paper presents a study of laminar to turbulent transition on a profile specifically designed for wind turbine blades, the DU91-W2-250, which belongs to a class of wind turbine dedicated airfoils, developed by Delft University of Technology. A comparison between the experimental behavior of the airfoil studied at Delft wind tunnel and the numerical predictions of the commercial CFD solver ANSYS FLUENT® has been performed. The prediction capabilities of the Spalart-Allmaras turbulence model and of the γ-θ Transitional model have been tested. A sensitivity analysis of the numerical results to the spatial domain discretization has also been performed using four different computational grids, which have been created using the mesher GAMBIT®. The comparison between experimental measurements and CFD results have allowed to determine the importance of the numerical prediction of the laminar to turbulent transition, in order not to overestimate airfoil friction drag due to a fully turbulent-regime flow computation.





References:
[1] European Wind Energy Association, EU energy policy after 2020,
www.ewea.org, 2011.
[2] M. Raciti Castelli, G. Grandi and E. Benini, "Numerical Analysis of the
Performance of the DU91-W2-250 Airfoil for Straight-Bladed Vertical-
Axis Wind Turbine Application", submitted to ICAFM 2012:
International Conference on Advances in Fluid Mechanics, Florence
(Italy), February 28-29, 2012.
[3] W.A. Timmer, W. A. and R. P. J. O. M. van Rooij, "Summary of the
delft university wind turbine dedicated airfoils", AIAA-2003-0352.
[4] W.A. Timmer, W. A. and R. P. J. O. M. van Rooij, "Design of airfoils
for wind turbine blades", DUWIND, section Wind Energy, Faculty
CiTG, 03 May, 2004.
[5] G. Lombardi, M. V. Salvetti and D. Pinelli, "Numerical Evaluation of
Airfoil Friction Drag", J. Aircraft, Vol. 37, No. 2, pp. 354-356, 2000.
[6] Y. Lian and W. Shai, "Laminar-Turbulent Transition of a Low Reynolds
Number Rigid or Flexible Airfoil", AIAA Journal, Vol. 45, No. 7, July
2007, pp. 1501-1513.
[7] F. R. Menter, R. B. Langrty, S. R. Likki, Y. B. Suzen, P. G. Huang and
S. Völker, "A Correlation-Based Transition Model Using Local
Variables - Part I: Model Formulation", Journal of Turbomachinery,
Volume 128, Issue 3, pp. 413-422, 2006.
[8] F. R. Menter, R. B. Langrty, S. R. Likki, Y. B. Suzen, P. G. Huang and
S. Völker, "A Correlation-Based Transition Model Using Local
Variables - Part II: Test Cases and Industrial Applications", Journal of
Turbomachinery, Volume 128, Issue 3, pp. 423-434, 2006.
[9] E. Benini and R. Ponza, "Laminar to Turbulent Boundary Layer
Transition Investigation on a Supercritical Airfoil Using the ╬│-╬©
Transitional Model", 40th Fluid Dynamics Conference and Exhibit, 28
June - 1 July 2010, Chicago, Illinois, AIAA 2010-4289.
[10] S. Hosseinverdi and M. Boroomand, "Prediction of Laminar-Turbulent
Transitional Flow over Single and Two-Element Airfoils", 40th Fluid
Dynamics Conference and Exhibit, 28 June - 1 July 2010, Chicago,
Illinois, AIAA 2010-4290.
[11] L. Yuhong and L. Congming, "A numerical simulation of flow around a
wind turbine airfoil based on transition model", WNEC 2009: World
Non-Grid-Connected Wind Power and Energy Conference, Nanjing
(China), 24-26 Sept. 2009.
[12] W.A. Timmer, W. A. and R. P. J. O. M. van Rooij, Aifoil DU91-W2-
250 Coordinates and Measurements in Delft University 1.25x1.80 m
Low-speed Wind tunnel, data provided by direct contact from the
authors.
[13] ANSYS FLUENT 12.0-12.1 Documentation, Release 12.1 ┬® ANSYS,
Inc. 2009-10-01.
[14] J. Johansen, "Prediction of Laminar/Turbulent Transition in Airfoil
Flows", Ris├© National Laboratory, Roskilde, Denmark, May 1997,
Ris├©-R-987(EN).
[15] M. Raciti Castelli, F. Garbo, E. Benini, "Numerical investigation of
laminar to turbulent boundary layer transition on a NACA 0012 airfoil
for vertical-axis wind turbine applications", Wind Engineering, Vol. 35,
No. 6, 2011, pp. 661-686.