Evaluation of a Dual-Fluid Cold-Gas Thruster Concept

A new dual-fluid concept was studied that could eventually find application for cold-gas propulsion for small space satellites or other constant flow applications. In basic form, the concept uses two different refrigerant working fluids, each having a different saturation vapor pressure. The higher vapor pressure refrigerant remains in the saturation phase and is used to pressurize the lower saturation vapor pressure fluid (the propellant) which remains in the compressed liquid phase. A demonstration thruster concept based on this principle was designed and built to study its operating characteristics. An automotive-type electronic fuel injector was used to meter and deliver the propellant. Ejected propellant mass and momentum were measured for several combinations of refrigerants and hydrocarbon fluids. The thruster has the advantage of delivering relatively large total impulse at low tank pressure within a small volume.





References:
[1] J. M. Cardin and J. Acosta, "Design and Test of an Economical Cold
Gas Propulsion System," 14th Annual/AIAA/USU Conference on Small
Satellites, Logan, UT, Aug 24, 2000..
[2] E. Razzano and M. Pastena, "A Novel AOCS Cold-Gas Micro-
Propulsion System Design and Applications to Micro and Nano
Satellites," Small Satellite Missions for Earth Observation, eds. R.
Sandau et al., Springer Verlag, Berlin, Heidelberg, 2010.
[3] C.R. Seubert, H.J. Pernicka, and C.L. Norgren, "Refrigerant-Based
Propulsion System for Small Spacecraft," 43rd AIAA/ASME/SAE/ASEE
Joint Propulsion Conference & Exhibit, 8 - 11 July, Cincinnati, OH,
2007.
[4] C.R. Seubert, Refrigerant-Based Propulsion System for Small
Spacecraft, M.S. Thesis, Dept. of Aerospace Eng., University of
Missouri-Rolla, 2007.
[5] T. Yamamoto, O. Mori, and J. Kawaguchi, "New Thruster System for
Small Satellite: Gas-Liquid Equilibrium Thruster. Trans. of Japan Soc.
for Aeronautical and Space Sciences," Space Tech. Japan, Vol. 7, pp.
29-33, 2009.
[6] D. Suva, Technical Information, DuPont HFC-R-134a: Properties, Uses,
Storage, and Handling, 2004.
[7] W.C. Stone, "Fast Variable-Amplitude Cold Gas Thruster," Journal of
Spacecraft and Rockets, Vol. 32, No. 2, pp. 335-343, 1995.
[8] E.F. Obert, Internal Combustion Engines and Air Pollution, 3rd ed.,
Intext Educational Publishers, New York., 1973.
[9] C.M.B.P. Oliveira and W.A. Wakeham, Viscosity of R-134a, R32, and
R125 at Saturation. International Journal of Thermophysics, Vol. 20,
No. 2, 1999.
[10] R.L. Panton, Incompressible Flow, 3rd Ed., John Wiley and Sons, Inc.,
New Jersey, 2005.
[11] F. Franzoni, M. Milani, and L. Montorsi, "The Influence of Cavitation
and Aeration in a Multi-Fuel Injector," Soc. of Auto. Engr., Paper 2008-
01-2390, 2008.
[12] C. Lugini and M. Romano, "A ballistic-pendulum test stand to
characterize small cold-gas thruster nozzles," Acta Astronautica, Vol.
64, Issues 5-6, pp. 615-625, 2009.
[13] D. Halliday, R. Resnick, and J. Walker, Fundamentals of Physics, Fifth
Edition, USMA Edition", John Wiley & Sons, Inc., New York, 2000.