Elasto-Visco-Plastic-Damage Model for Pre-Strained 304L Stainless Steel Subjected to Low Temperature
Primary barrier of membrane type LNG containment system consist of corrugated 304L stainless steel. This 304L stainless steel is austenitic stainless steel which shows different material behaviors owing to phase transformation during the plastic work. Even though corrugated primary barriers are subjected to significant amounts of pre-strain due to press working, quantitative mechanical behavior on the effect of pre-straining at cryogenic temperatures are not available. In this study, pre-strain level and pre-strain temperature dependent tensile tests are carried to investigate mechanical behaviors. Also, constitutive equations with material parameters are suggested for a verification study.
[1] W.S. Lee, C.F. Lin, "Comparative study of the impact response and
microstructure of 304L stainless steel with and without prestrain", Metall.
Mater. Trans. A, vol. 33, pp. 2801-2810, 2002
[2] Y. Iino, "Effect of small and large amounts of prestrain at 295K on tensile
properties at 77K of 304 stainless steel", JSME Int J., Ser. A, vol. 35,
pp.303-309, 1992
[3] L.T. Robertson, T.B. Hilditch, P.D. Hodgson, "The effect of prestrain and
bake hardening on the low cycle fatigue properties of TRIP steel", Int. J.
Fatigue, vol. 30, pp.587-594, 2008
[4] W. S. Park, S. W. Yoo, M. H. Kim, and J. M. Lee, "Strain-rate effects on
the mechanical behavior of the AISI 300 series of austenitic stainless steel
under cryogenic environments", Mater. Des. Vol. 31, pp. 3630-3640,
2010
[5] K.J. Lee, M.S. Chun, M.H. Kim, J.M. Lee. "A new constitutive model of
austenitic stainless steel for cryogenic applications", Comp Mater Sci.,
vol. 46, pp. 1152-1162, 2009
[6] G.B. Olson, M. Cohen. Metall. Mater. Trans. A, vol. 6, pp. 791-795, 1975
[7] Tomita, Y., Iwamoto, T., "Computational prediction of deformation
behavior of TRIP steels under cyclic loading", Int. J. Mech. Sci., vol. 43,
pp. 2017-2034, 2001
[8] C. Garion, B. Skoczeń, S. Sgobba, "Constitutive modelling and
identification of parameters of the plastic strain-induced martensitic
transformation in 316L stainless steel at cryogenic temperatures", Int. J.
Plast., vol. 22, pp. 1234-1264, 2006
[9] Y. Tomita, T. Iwamoto, Int. J. Mech. Sci. vol. 37, no. 12, pp. 1295-1305,
1995
[10] W. S. Park, C. S. Lee, M. S. Chun, M, H. Kim, J. M. Lee, "Comparative
study on mechanical behavior of low temperature application materials
for ships and offshore structures: Part II - Constitutive model", Mater Sci
Eng A., vol. 528, pp. 7560-7569, 2011
[11] Bodner, S. R., Unified Plasticity for Engineering Applications .Kluwer
Academic/ Plenum Publishers, 2002
[12] L. Durrenberger, J.R. Klepaczko and A. Rusinek, "Constitutive modeling
of metals based on the evolution of the strain hardening rate", J. Eng.
Mater. Technol., vol. 129, pp.550-558, 2007
[13] I.K. Senchenkov and G.A.Tabieva, "Determination of the parameters of
the Bodner-Partom model for thermoviscoplastic deformation of
materials", Int. Appl. Mech., vol. 32, pp.132-139, 1996
[14] D.R. Hayhurst and F.A. Leckie, "Constitutive Equation for Creep
Damage", Acta Metall., vol. 25, pp.1059-1070, 1977
[15] C. Zener and J.H. Hollomon, J. appl. Phys., vol. 15, pp. 22, 1944
[1] W.S. Lee, C.F. Lin, "Comparative study of the impact response and
microstructure of 304L stainless steel with and without prestrain", Metall.
Mater. Trans. A, vol. 33, pp. 2801-2810, 2002
[2] Y. Iino, "Effect of small and large amounts of prestrain at 295K on tensile
properties at 77K of 304 stainless steel", JSME Int J., Ser. A, vol. 35,
pp.303-309, 1992
[3] L.T. Robertson, T.B. Hilditch, P.D. Hodgson, "The effect of prestrain and
bake hardening on the low cycle fatigue properties of TRIP steel", Int. J.
Fatigue, vol. 30, pp.587-594, 2008
[4] W. S. Park, S. W. Yoo, M. H. Kim, and J. M. Lee, "Strain-rate effects on
the mechanical behavior of the AISI 300 series of austenitic stainless steel
under cryogenic environments", Mater. Des. Vol. 31, pp. 3630-3640,
2010
[5] K.J. Lee, M.S. Chun, M.H. Kim, J.M. Lee. "A new constitutive model of
austenitic stainless steel for cryogenic applications", Comp Mater Sci.,
vol. 46, pp. 1152-1162, 2009
[6] G.B. Olson, M. Cohen. Metall. Mater. Trans. A, vol. 6, pp. 791-795, 1975
[7] Tomita, Y., Iwamoto, T., "Computational prediction of deformation
behavior of TRIP steels under cyclic loading", Int. J. Mech. Sci., vol. 43,
pp. 2017-2034, 2001
[8] C. Garion, B. Skoczeń, S. Sgobba, "Constitutive modelling and
identification of parameters of the plastic strain-induced martensitic
transformation in 316L stainless steel at cryogenic temperatures", Int. J.
Plast., vol. 22, pp. 1234-1264, 2006
[9] Y. Tomita, T. Iwamoto, Int. J. Mech. Sci. vol. 37, no. 12, pp. 1295-1305,
1995
[10] W. S. Park, C. S. Lee, M. S. Chun, M, H. Kim, J. M. Lee, "Comparative
study on mechanical behavior of low temperature application materials
for ships and offshore structures: Part II - Constitutive model", Mater Sci
Eng A., vol. 528, pp. 7560-7569, 2011
[11] Bodner, S. R., Unified Plasticity for Engineering Applications .Kluwer
Academic/ Plenum Publishers, 2002
[12] L. Durrenberger, J.R. Klepaczko and A. Rusinek, "Constitutive modeling
of metals based on the evolution of the strain hardening rate", J. Eng.
Mater. Technol., vol. 129, pp.550-558, 2007
[13] I.K. Senchenkov and G.A.Tabieva, "Determination of the parameters of
the Bodner-Partom model for thermoviscoplastic deformation of
materials", Int. Appl. Mech., vol. 32, pp.132-139, 1996
[14] D.R. Hayhurst and F.A. Leckie, "Constitutive Equation for Creep
Damage", Acta Metall., vol. 25, pp.1059-1070, 1977
[15] C. Zener and J.H. Hollomon, J. appl. Phys., vol. 15, pp. 22, 1944
@article{"International Journal of Mechanical, Industrial and Aerospace Sciences:54078", author = "Jeong-Hyeon Kim and Ki-Yeob Kang and Myung-Hyun Kim and Jae-Myung Lee", title = "Elasto-Visco-Plastic-Damage Model for Pre-Strained 304L Stainless Steel Subjected to Low Temperature", abstract = "Primary barrier of membrane type LNG containment system consist of corrugated 304L stainless steel. This 304L stainless steel is austenitic stainless steel which shows different material behaviors owing to phase transformation during the plastic work. Even though corrugated primary barriers are subjected to significant amounts of pre-strain due to press working, quantitative mechanical behavior on the effect of pre-straining at cryogenic temperatures are not available. In this study, pre-strain level and pre-strain temperature dependent tensile tests are carried to investigate mechanical behaviors. Also, constitutive equations with material parameters are suggested for a verification study.
", keywords = "Constitutive equation, corrugated sheet, pre-strain effect, elasto-visco-plastic-damage model, 304L stainless steel.", volume = "6", number = "1", pages = "84-6", }
