Design Optimization of Aerocapture with Aerodynamic-Environment-Adaptive Variable Geometry Flexible Aeroshell

This paper proposes the concept of aerocapture with aerodynamic-environment-adaptive variable geometry flexible aeroshell that vehicle deploys. The flexible membrane is composed of thin-layer film or textile as its aeroshell in order to solve some problems obstructing realization of aerocapture technique. Multi-objective optimization study is conducted to investigate solutions and derive design guidelines. As a result, solutions which can avoid aerodynamic heating and enlarge the corridor width up to 10% are obtained successfully, so that the effectiveness of this concept can be demonstrated. The deformation-use optimum solution changes its drag coefficient from 1.6 to 1.1, along with the change in dynamic pressure. Moreover, optimization results show that deformation-use solution requires the membrane for which upper temperature limit and strain limit are more than 700 K and 120%, respectively, and elasticity (Young-s modulus) is of order of 106 Pa.




References:
[1] T. Matsuo, K. Morishima, R. Inoue, and Y. Nonaka, "Development of
500N Ceramic Thruster for a Venus Explorer ÔÇÿPlanet-C- ", Mitsubishi
Heavy Industry Technical Review, vol.45, pp.46-49, 2008
[2] Gerald, D. Walberg. "A Survey of Aeroassisted Orbit Transfer", J.
Spacecraft and Rockets, vol.22, pp.3-18, 1985
[3] Zumwalt, C. H., Sostaric, R. R., and Westhelle, C. H., "Aerocapture
Guidance and Performance at Mars for High-Mass Systems", AIAA
paper 2010-7971, AIAA/AAS Astrodynamics Specialist Conference,
Toronto, Canada. 2010.
[4] K. Yamada, T. Abe, K. Suzuki, O. Imamura, D. Akita, and MAAC
R&D Group, "Reentry Demonstration Plan of Flare-type Membrane
Aeroshell for Atmospheric Entry Vehicle using a Sounding Rocket",
AIAA paper, 2011-2521.
[5] K. L. Daniel, et al, "Inflatable Re-entry Vehicle Experiment (IRVE)-4
Overview", AIAA paper, 2011-2580.
[6] R. Philippe, E. David, "Postflight Analysis of Inflatable Reentry and
Descent Technology Blackout During Earth Reentry", J. Spacecraft
and Rockets, vol.46, pp.800-809, 2009
[7] M. Shibahara, T. Kida, "Introduction to the Space Engineering 2 (in
Japanese)", Tokyo: Baifukan, 1998, pp. 117-128
[8] M. M. Michelle, "Overview of the NASA Entry, Descent, and
Landing System Analysis (EDL-SA)", 7th international Planetary
Probe Workshop, 2010.
[9] Tauber, M. E., Bowles, J. V. and Yang, L., "Use of Atmospheric
Braking during Mars Mission", J. Spacecraft and Rockets, vol.27,
pp.514-521, 1990.
[10] K. Yamada, T. Sonoda, K. Nakashino, and T. Abe, "Structural
Strength of Flare-type Membrane Aeroshell Supported by Inflatable
Torus against Aerodynamic Force", the 28th International Symposium
on Space Technology and Science, 2011-c-34, 2011.
[11] Yamada, K., and Suzuki, K., "A Particle-Based Model and Its
Validation for Deformation Analysis of Membrane Aeroshell (in
Japanese)", JSASS, vol.53, pp.51-60, 2005.
[12] Anderson, J. D. Jr., "Hypersonic and High Temperature Gas
Dynamics", New York: McGraw-Hill, 1989, pp.45-56.
[13] Deb. K., Agarwal. S., Pratap. A, and Meyarivan. T., "A Fast and
Elitist Multiobjective Genetic Algorithm: NSGA-2", IEEE
Transactions on Evolutionary Computation, vol.6, pp.182-197, 2002
[14] Box, G. E. P., Wilson, K. B., "On the experimental attainment of
optimal conditions", J. Royal Statistical Society, vol.13, pp.1-45,
1951.
[15] Timothy,W.S., et al., "Kriging Models for Global Approximation in
Simulation-Based Multidisciplinary Design Optimization", AIAA
Journal, vol.39, pp.2233-2241, 2001.
[16] M.Kanazaki, S.Jeong, and K.Yamamoto, "High-Lift System
Optimization Based on Kriging Model Using High Fidelty Flow
Solver", Transactions of The Japan Society for Aeronautical and
Space Sciences, vol.49, pp.169-174, 2006.
[17] M.Sekishiro, A.Todoroki, "Dimension and Stacking Sequence
Optimization of Large Composite Structures Using Kriging and
MOGA Method", Journal of the Society of Materials Sciences Japan,
Vol.56, No.5, pp.432-437, 2007.
[18] M. D. Mckay, W. J. Conover., "A Comparison of Three Methods for
Selecting Values of input Variables in the Analysis of Output from a
Computer Code", Technometrics, vol.21, pp.239-245, 1979.