The Mass Attenuation Coefficients, Effective Atomic Cross Sections, Effective Atomic Numbers and Electron Densities of Some Halides

The total mass attenuation coefficients m/r, of some halides such as, NaCl, KCl, CuCl, NaBr, KBr, RbCl, AgCl, NaI, KI, AgBr, CsI, HgCl2, CdI2 and HgI2 were determined at photon energies 279.2, 320.07, 514.0, 661.6, 1115.5, 1173.2 and 1332.5 keV in a well-collimated narrow beam good geometry set-up using a high resolution, hyper pure germanium detector. The mass attenuation coefficients and the effective atomic cross sections are found to be in good agreement with the XCOM values. From these mass attenuation coefficients, the effective atomic cross sections sa, of the compounds were determined. These effective atomic cross section sa data so obtained are then used to compute the effective atomic numbers Zeff. For this, the interpolation of total attenuation cross-sections of photons of energy E in elements of atomic number Z was performed by using the logarithmic regression analysis of the data measured by the authors and reported earlier for the above said energies along with XCOM data for standard energies. The best-fit coefficients in the photon energy range of 250 to 350 keV, 350 to 500 keV, 500 to 700 keV, 700 to 1000 keV and 1000 to 1500 keV by a piecewise interpolation method were then used to find the Zeff of the compounds with respect to the effective atomic cross section sa from the relation obtained by piece wise interpolation method. Using these Zeff values, the electron densities Nel of halides were also determined. The present Zeff and Nel values of halides are found to be in good agreement with the values calculated from XCOM data and other available published values.

Authors:



References:
[1] D.F. Jackson, D.J. Hakes. “X-ray attenuation coefficients of elements and mixtures” Phys. Report 70 (1981) 169-233.
[2] J H Hubbell and S M Seltzer, Report, “Tables of X-ray mass attenuation coefficients from 1 keV to 20 MeV for elements Z=1 to Z=92. NISTIR-5632 (1995).
[3] Hine G.J. “The effective atomic numbers of materials for various gamma ray processes’, Phys. Rev. 85 (1952) 725
[4] K. Parthasaradhi “Studies on the effective atomic numbers in Alloys for gamma ray interactions in the energy region 100-662 keV– Indian J Pure Appl. Phys. 6 (1968) 609-613.
[5] D.V. Krishna Reddy, K. Suresh Babu and S. Chandra Lingam. “Photon cross sections and effective atomic numbers in some alloys”, Can. J. Phys. 63 (1985) 1421-1423
[6] V.R.K. Murty, D.P. Winkoun, K.R.S. Devan. ‘Effective atomic numbers for W/Cu alloy using transmission experiments” Applied Radiation and Isotopes 53 (2000) 945-948.
[7] A.H El-Kateb, R.A.M. Rizk, A.M. Abdul-Kader. “Determination of atomic cross sections and effective atomic numbers for some alloys” Ann. Nucl. Energy 27 (2000) 1333-1343.
[8] Orhan Icelli, Salih Erzeneoglu. Effective atomic numbers of some vanadium and nickel compounds for total photon interactions using transmission experiment”: Journal of Quantitative spectroscopy & Radiative Transfer 85 (2004) 115-124.
[9] I. Hand, L. Demir “Mass attenuation coefficients, effective atomic and electron numbers of Ti and Ni alloys”: Radiation Measurements 44 (2009) 289-294.
[10] A.H El-Kateb and A.S. Abdul-Hamid. "Photon attenuation coefficient study of some materials containing ydrogen, carbon and oxygen” Appl. Radiat. Isot. 42 (1991) 303-307.
[11] G.S. Bhundal and K. Singh. “Study of the mass attenuation coefficients and Effective atomic numbers in some multielement materials” Appl. Radiat. Isot. 44 (1993) 929-939
[12] K. Singh, Rajinderjit Kumar, Vandana and Vijay Kumar. “Effective atomic numbers for materials of dosimetric interest” Radiat. Phys. Chem. 47 (1996), 533-541.
[13] T. Kiran Kumar and K. Venkata Reddy. “Effective atomic numbers for materials of dosimetric interest” Radiat. Phys. Chem. 50 (1997), 545-553.
[14] Shivaramu, R. Amutha and V. Ramprasath. “Effective atomic number and mass attenuation coefficients of TLD compounds for total Photon interaction” Nuclear Science and Engineering. 132 (1998) 148-153.
[15] Harvinder Singh, Kulvanth Singh, Leif Gerward, Kanwarjit Singh Hari Singh Sahota, Rohila Nathuram “ZnO-PbO-B2O3 glasses as gamma ray shielding materials” Nucl. Instr. Meth. in Phys. Resh. B 207 (2003) 257-262
[16] K. Gopinathan Nair, T.K. Umesh and Ramakrishna Gowda “Total attenuation cross sections of several amino acids at 661.6, 1173 and 1332.5 keV”: Radiat. Phys. Chem. 45 (1995) 231-233.
[17] Shivalinge Gowda, S. Krishnaveni, T. Yashoda, T. K. Umesh and R Gowda, “Photon mass attenuation coefficients, effective atomic numbers and electron densities of some thermoluminescent dosimetric compounds” Pramana-J. phys. 63 (2004) 529.
[18] Shivalinge Gowda, S. Krishnaveni and R Gowda, Nucl. Inst. & methods in Phys. Research B 239 (2005) 361-369.
[19] Gagandeep kaur, Kulvant Sing, B.S. Lark, H.S. Sahota- “Photon interaction studies in solutions of some alkali metal chlorides – I” Radiation Physics and Chemistry 58 (2000) 315-323.
[20] S. Chandra Lingam, K. Suresh Babu, D. V. Krishna Reddy,” Total gamma ray cross sections and effective atomic numbers in compounds in the energy region 32 to 662 keV”, Ind. J. Phys. 58A (1984) 285.
[21] Pravina P. Pawar et al., Studies on mass attenuation coefficient, effective atomic number and electron density of some amino acids in the energy range 0.122-1.330 MeV” Radiation Physics and Chemistry 92 (2013) 22-27.
[22] Prashant S. Kore, Pravina P. Pawar: “Measurements of mass attenuation coefficient, effective atomic number and electron density of some aminoacids” Radiation Physics and Chemistry 98 (2014) 86–91
[23] Demet Yilmaz Elif Boydaş, Esra Cömert “Determination of mass attenuation coefficients and effective atomic numbers for compounds of the 3d transition elements:: Radiation Physics and Chemistry 125, (2016), 65–68.
[24] A Perumallu, A S Nageshwara Rao and G Krishna Rao, “Photon interaction measurements of certain compounds in the energy range 30-660 keV.” Can. J. Phys. 62, (1984) 454
[25] Manjunathaguru & T.K. Umesh “Effective atomic numbers and electron densities of some biologically important compounds containing H, C, N and O in the energy range145-1330 keV” Joural of Physics B. Atomic, Molecular and Optical Physics, 39 (2006) 3969
[26] A. Perumallu, A.S. Nageswara Rao and G. Krishna Rao. Z- dependence of photon interaction interactions in multielement materials” Physica C132, (1985) 388-394
[27] S.R. Manohara, S.M. Hanagodiumath, K.S. Thind, L. Gerward, On the effective atomic number and electron density: A comprehensive set of formulas for all types of materials and energies above 1 keV: Nucl. Inst. & Meth. in Phys. Resear. B 266 (2008) 3906-3912.
[28] J H Hubbell and S M Seltzer, Report, “Tables of X-ray mass attenuation coefficients from 1 keV to 20 MeV for elements Z=1 to Z=92. NISTIR-5632 (1995)
[29] M J Berger and J H Hubbell, NBSIR 87 “XCOM: Photon cross sections on a personal computer” (1987) p.3597
[30] R D Deslattes, “Estimates of X-ray attenuation coefficients for the elements and their compounds”. Acta Cryst. A 25 (1969) 89-93.