Abstract: One of the major, difficult tasks in automated video
surveillance is the segmentation of relevant objects in the scene.
Current implementations often yield inconsistent results on average
from frame to frame when trying to differentiate partly occluding
objects. This paper presents an efficient block-based segmentation
algorithm which is capable of separating partly occluding objects and
detecting shadows. It has been proven to perform in real time with a
maximum duration of 47.48 ms per frame (for 8x8 blocks on a
720x576 image) with a true positive rate of 89.2%. The flexible
structure of the algorithm enables adaptations and improvements with
little effort. Most of the parameters correspond to relative differences
between quantities extracted from the image and should therefore not
depend on scene and lighting conditions. Thus presenting a
performance oriented segmentation algorithm which is applicable in
all critical real time scenarios.
Abstract: Controlled release urea has become popular in agricultural industry as it helps to solve environmental issues and increase crop yield. Recently biomass was identified to replace the polymer used as a coating material in the conventional coated urea. In this paper spreading and contact angle of biomass droplet (lignin, cellulose and clay) on urea surface are investigated experimentally. There were two tests were conducted, sessile drop for contact angle measurement and pendant drop for contact angle measurement. A different concentration of biomass droplet was released from 30 mm above a substrate. Glass was used as a controlled substrate. Images were recorded as soon as the droplet impacted onto the urea before completely adsorb into the urea. Digitized droplets were then used to identify the droplet-s surface tension and contact angle. There is large difference observed between the low surface tension and high surface tension liquids, where the wetting and spreading diameter is higher for lower surface tension. From the contact angle results, the data showed that the biomass coating films were possible as wetting liquid (θ < 90º). Contact angle of biomass coating material gives good indication for the wettablity of a liquid on urea surface.
Abstract: In the area where the high quality water is not
available, unconventional water sources are used to irrigate.
Household leachate is one of the sources which are used in dry and
semi dry areas in order to water the barer trees and plants. It meets
the plants needs and also has some effects on the soil, but at the same
time it might cause some problems as well. This study in order to
evaluate the effect of using Compost leachate on the density of soil
iron in form of a statistical pattern called ''Split Plot'' by using two
main treatments, one subsidiary treatment and three repetitions of the
pattern in a three month period. The main N treatments include:
irrigation using well water as a blank treatments and the main I
treatments include: irrigation using leachate and well water
concurrently. Some subsidiary treatments were DI (Drop Irrigation)
and SDI (Sub Drop Irrigation). Then in the established plots, 36
biannual pine and cypress shrubs were randomly grown. Two months
later the treatment begins. The results revealed that there was a
significant variation between the main treatment and the instance
regarding pH decline in the soil which was related to the amount of
leachate injected into the soil. After some time and using leachate the
pH level fell, as much as 0.46 and also increased due to the great
amounts of leachate. The underneath drop irrigation ends in better
results than sub drop irrigation since it keeps the soil texture fixed.
Abstract: A basic conceptual study of TCSC device on Simulink is a teaching aid and helps in understanding the rudiments of the topic. This paper thus stems out from basics of TCSC device and analyzes the impedance characteristics and associated single & multi resonance conditions. The Impedance characteristics curve is drawn for different values of inductance in MATLAB using M-files. The study is also helpful in estimating the appropriate inductance and capacitance values which have influence on multi resonance point in TCSC device. The capacitor voltage, line current, thyristor current and capacitor current waveforms are discussed briefly as simulation results. Simulink model of TCSC device is given and corresponding waveforms are analyzed. The subsidiary topics e.g. power oscillation damping, SSR mitigation and transient stability is also brought out.
Abstract: The exploration of this paper will focus on the Cshaped
transition curve. This curve is designed by using the concept
of circle to circle where one circle lies inside other. The degree of
smoothness employed is curvature continuity. The function used in
designing the C-curve is Bézier-like cubic function. This function has
a low degree, flexible for the interactive design of curves and
surfaces and has a shape parameter. The shape parameter is used to
control the C-shape curve. Once the C-shaped curve design is
completed, this curve will be applied to design spur gear tooth. After
the tooth design procedure is finished, the design will be analyzed by
using Finite Element Analysis (FEA). This analysis is used to find
out the applicability of the tooth design and the gear material that
chosen. In this research, Cast Iron 4.5 % Carbon, ASTM A-48 is
selected as a gear material.
Abstract: As part of national epidemiological survey on bovine
viral diarrhea virus (BVDV), a total of 274 dejecta samples were
collected from 14 cattle farms in 8 areas of Xinjiang Uygur
Autonomous Region in northwestern China. Total RNA was extracted
from each sample, and 5--untranslated region (UTR) of BVDV
genome was amplified by using two-step reverse
transcriptase-polymerase chain reaction (RT-PCR). The PCR products
were subsequently sequenced to study the genetic variations of BVDV
in these areas. Among the 274 samples, 33 samples were found
virus-positive. According to sequence analysis of the PCR products,
the 33 samples could be arranged into 16 groups. All the sequences,
however, were highly conserved with BVDV Osloss strains. The virus
possessed theses sequences belonged to BVDV-1b subtype by
phylogenetic analysis. Based on these data, we established a typing
tree for BVDV in these areas. Our results suggested that BVDV-1b
was a predominant subgenotype in northwestern China and no
correlation between the genetic and geographical distances could be
observed above the farm level.
Abstract: The paper provides an in-depth tutorial of mathematical
construction of maximal length sequences (m-sequences) via primitive
polynomials and how to map the same when implemented in
shift registers. It is equally important to check whether a polynomial
is primitive or not so as to get proper m-sequences. A fast method to
identify primitive polynomials over binary fields is proposed where
the complexity is considerably less in comparison with the standard
procedures for the same purpose.
Abstract: Palestinian cities face the challenges of land scarcity,
high population growth rates, rapid urbanization, uneven
development and territorial fragmentation. Due to geopolitical
constrains and the absence of an effective Palestinian planning
institution, urban development in Palestinian cities has not followed
any discernable planning scheme. This has led to a number of
internal contradictions in the structure of cities, and adversely
affected land use, the provision of urban services, and the quality of
the living environment.
This paper explores these challenges, and the potential that exists
for introducing a more sustainable urban development pattern in
Palestinian cities. It assesses alternative development approaches
with a particular focus on sustainable development, promoting ecodevelopment
imperatives, limiting random urbanization, and meeting
present and future challenges, including fulfilling the needs of the
people and conserving the scarce land and limited natural resources.
This paper concludes by offering conceptual proposals and guidelines
for promoting sustainable physical development in Palestinian cities.
Abstract: Power loss reduction is one of the main targets in power industry and so in this paper, the problem of finding the optimal configuration of a radial distribution system for loss reduction is considered. Optimal reconfiguration involves the selection of the best set of branches to be opened ,one each from each loop, for reducing resistive line losses , and reliving overloads on feeders by shifting the load to adjacent feeders. However ,since there are many candidate switching combinations in the system ,the feeder reconfiguration is a complicated problem. In this paper a new approach is proposed based on a simple optimum loss calculation by determining optimal trees of the given network. From graph theory a distribution network can be represented with a graph that consists a set of nodes and branches. In fact this problem can be viewed as a problem of determining an optimal tree of the graph which simultaneously ensure radial structure of each candidate topology .In this method the refined genetic algorithm is also set up and some improvements of algorithm are made on chromosome coding. In this paper an implementation of the algorithm presented by [7] is applied by modifying in load flow program and a comparison of this method with the proposed method is employed. In [7] an algorithm is proposed that the choice of the switches to be opened is based on simple heuristic rules. This algorithm reduce the number of load flow runs and also reduce the switching combinations to a fewer number and gives the optimum solution. To demonstrate the validity of these methods computer simulations with PSAT and MATLAB programs are carried out on 33-bus test system. The results show that the performance of the proposed method is better than [7] method and also other methods.
Abstract: In this paper, an improved edge detection algorithm
based on fuzzy combination of mathematical morphology and
wavelet transform is proposed. The combined method is proposed to
overcome the limitation of wavelet based edge detection and
mathematical morphology based edge detection in noisy images.
Experimental results show superiority of the proposed method, as
compared to the traditional Prewitt, wavelet based and morphology
based edge detection methods. The proposed method is an effective
edge detection method for noisy image and keeps clear and
continuous edges.
Abstract: The potential, opportunities and drawbacks of biogas
technology use in Turkey are evaluated in this paper. Turkey is
dependent on foreign sources of energy. Therefore, use of biogas
technology would provide a safe way of waste disposal and recovery
of renewable energy, particularly from a sustainable domestic source,
which is less unlikely to be influenced by international price or
political fluctuations. Use of biogas technology would especially
meet the cooking, heating and electricity demand in rural areas and
protect the environment, additionally creating new job opportunities
and improving social-economical conditions.
Abstract: Demolitions of buildings have created a lot of waste
and one of it is clay bricks. The waste clay bricks were ground to
roughly cement fineness and used to partially replaced cement at
10%, 20% and 30% with w/b ratio of 0.6 and tested at 7, 28, 60, 90
and 120 days. The result shows that the compressive strength of GCB
concrete increases over age however, decreases as the level of
replacements increases. It was also found that 10% replacement of
GCB gave the highest compressive strength, however for optimum
replacement, 30% was chosen as it still attained strength of grade 30
concrete. In terms of durability performances, results show that GCB
replacement up to 30% was found to be efficient in reducing water
absorption as well as water permeability. These studies show that
GCB has the potential to be used as partial cement replacement in
making concrete.
Abstract: The ITE Project is a project that has 1800 km length
and across the Turkey's land through east to west. The project of
pipeline enters geographically from Iran to Doğubayazit (Turkey) in
the east, exits to Greece from Ipsala province of Turkey in the west.
This project is the one of the international projects in such scale that
provides the natural gas of Iran and Caspian Sea through the
European continent. In this investigation, some information will be
given about the methods used to verify the direction of the pipeline
and the technical properties of the results obtained. The cost of
project itself entirely depends on the direction of the pipeline which
would be as short as possible and the specifications of the land cover.
Production standards of 1/2000 scaled digital orthophoto and vectoral
maps as a results of the use of map production materials and methods
(such as high resolution satellite images, and digital aerial images
captured from digital aerial cameras), will also be given in this report.
According to Turkish national map production standards, TM
((Transversal Mercator, 3 degree) projection is used for large scale
map and UTM (Universal Transversal Mercator, 6 degree) is used for
small scale map production standards. Some information is also given
about the projection used in the ITE natural gas pipeline project.
Abstract: Aloe vera has been used worldwide both for
pharmaceutical, food, and cosmetic industries due to the plethora of
biological activities of some of its metabolites. The aim of this study
was to evaluate the antifungal and antioxidant activities of the leaf
extract. The antifungal activity was determined by the agar-well
diffusion method against plant and human fungal pathogens. The
methanol and ethanol portions of the extracts studied were more
bioactive than ethyl acetate portion. It was also observed that the
activity was more pronounced on plant pathogen than human
pathogen except Candida albicans. This is an indication that the
extract has the potential to treat plant fungal infections. The Aloe
extract showed the significant antioxidant activity by the DPPH
radical scavenging method. Therefore, the Aloe extract provided as
natural antioxidant has been used in health foods for medical and
preservative purposes.
Abstract: Data mining uses a variety of techniques each of which is useful for some particular task. It is important to have a deep understanding of each technique and be able to perform sophisticated analysis. In this article we describe a tool built to simulate a variation of the Kohonen network to perform unsupervised clustering and support the entire data mining process up to results visualization. A graphical representation helps the user to find out a strategy to optmize classification by adding, moving or delete a neuron in order to change the number of classes. The tool is also able to automatically suggest a strategy for number of classes optimization.The tool is used to classify macroeconomic data that report the most developed countries? import and export. It is possible to classify the countries based on their economic behaviour and use an ad hoc tool to characterize the commercial behaviour of a country in a selected class from the analysis of positive and negative features that contribute to classes formation.
Abstract: Kepsut-Dursunbey volcanic field (KDVF) is located
in NW Turkey and contains various products of the post-collisional
Neogene magmatic activity. Two distinct volcanic suites have been
recognized; the Kepsut volcanic suite (KVS) and the Dursunbey
volcanic suite (DVS). The KVS includes basaltic trachyandesitebasaltic
andesite-andesite lavas and associated pyroclastic rocks. The
DVS consists of dacite-rhyodacite lavas and extensive pumice-ash
fall and flow deposits. Petrographical features (i.e. existence of
xenocrysts, glomerocrysts, and mixing-compatible textures) and
mineral chemistry of phenocryst assemblages of both suites provide
evidence for magma mixing/AFC. Calculated crystallization
pressures and temperatures give values of 5.7–7.0 kbar and 927–982
°C for the KVS and 3.7–5.3 kbar and 783-787°C for the DVS,
indicating separate magma reservoirs and crystallization in magma
chambers at deep and mid crustal levels, respectively. These
observations support the establishment and evolution of KDVF
magma system promoted by episodic basaltic inputs which may
generate and mix with crustal melts.
Abstract: The p53 tumor suppressor gene plays two important
roles in genomic stability: blocking cell proliferation after DNA
damage until it has been repaired, and starting apoptosis if the
damage is too critical. Codon 72 exon4 polymorphism (Arg72Pro) of
the P53 gene has been implicated in cancer risk. Various studies have
been done to investigate the status of p53 at codon 72 for arginine
(Arg) and proline (Pro) alleles in different populations and also the
association of this codon 72 polymorphism with various tumors. Our
objective was to investigate the possible association between P53
Arg72Pro polymorphism and susceptibility to colorectal cancer
among Isfahan and Chaharmahal Va Bakhtiari (a part of south west
of Iran) population. We investigated the status of p53 at codon 72 for
Arg/Arg, Arg/Pro and Pro/Pro allele polymorphisms in blood
samples from 145 colorectal cancer patients and 140 controls by
Nested-PCR of p53 exon 4 and digestion with BstUI restriction
enzyme and the DNA fragments were then resolved by
electrophoresis in 2% agarose gel. The Pro allele was 279 bp, while
the Arg allele was restricted into two fragments of 160 and 119 bp.
Among the 145 colorectal cancer cases 49 cases (33.79%) were
homozygous for the Arg72 allele (Arg/Arg), 18 cases (12.41%) were
homozygous for the Pro72 allele (Pro/Pro) and 78 cases (53.8%)
found in heterozygous (Arg/Pro).
In conclusion, it can be said that p53Arg/Arg genotype may be
correlated with possible increased risk of this kind of cancers in south
west of Iran.
Abstract: This paper provides an in-depth study of Wireless
Sensor Network (WSN) application to monitor and control the
swiftlet habitat. A set of system design is designed and developed
that includes the hardware design of the nodes, Graphical User
Interface (GUI) software, sensor network, and interconnectivity for
remote data access and management. System architecture is proposed
to address the requirements for habitat monitoring. Such applicationdriven
design provides and identify important areas of further work
in data sampling, communications and networking. For this
monitoring system, a sensor node (MTS400), IRIS and Micaz radio
transceivers, and a USB interfaced gateway base station of Crossbow
(Xbow) Technology WSN are employed. The GUI of this monitoring
system is written using a Laboratory Virtual Instrumentation
Engineering Workbench (LabVIEW) along with Xbow Technology
drivers provided by National Instrument. As a result, this monitoring
system is capable of collecting data and presents it in both tables and
waveform charts for further analysis. This system is also able to send
notification message by email provided Internet connectivity is
available whenever changes on habitat at remote sites (swiftlet farms)
occur. Other functions that have been implemented in this system
are the database system for record and management purposes; remote
access through the internet using LogMeIn software. Finally, this
research draws a conclusion that a WSN for monitoring swiftlet
habitat can be effectively used to monitor and manage swiftlet
farming industry in Sarawak.
Abstract: Chaos and fractals are novel fields of physics and mathematics showing up a new way of universe viewpoint and creating many ideas to solve several present problems. In this paper, a novel algorithm based on the chaotic sequence generator with the highest ability to adapt and reach the global optima is proposed. The adaptive ability of proposal algorithm is flexible in 2 steps. The first one is a breadth-first search and the second one is a depth-first search. The proposal algorithm is examined by 2 functions, the Camel function and the Schaffer function. Furthermore, the proposal algorithm is applied to optimize training Multilayer Neural Networks.
Abstract: In the recent past Learning Classifier Systems have
been successfully used for data mining. Learning Classifier System
(LCS) is basically a machine learning technique which combines
evolutionary computing, reinforcement learning, supervised or
unsupervised learning and heuristics to produce adaptive systems. A
LCS learns by interacting with an environment from which it
receives feedback in the form of numerical reward. Learning is
achieved by trying to maximize the amount of reward received. All
LCSs models more or less, comprise four main components; a finite
population of condition–action rules, called classifiers; the
performance component, which governs the interaction with the
environment; the credit assignment component, which distributes the
reward received from the environment to the classifiers accountable
for the rewards obtained; the discovery component, which is
responsible for discovering better rules and improving existing ones
through a genetic algorithm. The concatenate of the production rules
in the LCS form the genotype, and therefore the GA should operate
on a population of classifier systems. This approach is known as the
'Pittsburgh' Classifier Systems. Other LCS that perform their GA at
the rule level within a population are known as 'Mitchigan' Classifier
Systems. The most predominant representation of the discovered
knowledge is the standard production rules (PRs) in the form of IF P
THEN D. The PRs, however, are unable to handle exceptions and do
not exhibit variable precision. The Censored Production Rules
(CPRs), an extension of PRs, were proposed by Michalski and
Winston that exhibit variable precision and supports an efficient
mechanism for handling exceptions. A CPR is an augmented
production rule of the form: IF P THEN D UNLESS C, where
Censor C is an exception to the rule. Such rules are employed in
situations, in which conditional statement IF P THEN D holds
frequently and the assertion C holds rarely. By using a rule of this
type we are free to ignore the exception conditions, when the
resources needed to establish its presence are tight or there is simply
no information available as to whether it holds or not. Thus, the IF P
THEN D part of CPR expresses important information, while the
UNLESS C part acts only as a switch and changes the polarity of D
to ~D. In this paper Pittsburgh style LCSs approach is used for
automated discovery of CPRs. An appropriate encoding scheme is
suggested to represent a chromosome consisting of fixed size set of
CPRs. Suitable genetic operators are designed for the set of CPRs
and individual CPRs and also appropriate fitness function is proposed
that incorporates basic constraints on CPR. Experimental results are
presented to demonstrate the performance of the proposed learning
classifier system.