Abstract: Liners are made to protect the groundwater table from
the infiltration of leachate which normally carries different kinds of
toxic materials from landfills. Although these liners are engineered to
last for long period of time; unfortunately these liners fail; therefore,
toxic materials pass to groundwater. This paper focuses on the
changes of the hydraulic conductivity of a sand-bentonite liner due to
the infiltration of biofuel and ethanol fuel. Series of laboratory tests
were conducted in 20-cm-high PVC columns. Several compositions
of sand-bentonite liners were tested: 95% sand: 5% bentonite; 90%
sand: 10% bentonite; and 100% sand (passed mesh #40). The
columns were subjected to extreme pressures of 40 kPa, and 100 kPa
to evaluate the transport of alternative fuels (biofuel and ethanol
fuel). For comparative studies, similar tests were carried out using
water. Results showed that hydraulic conductivity increased due to
the infiltration of alternative fuels through the liners. Accordingly,
the increase in the hydraulic conductivity showed significant
dependency on the type of liner mixture and the characteristics of the
liquid. The hydraulic conductivity of a liner (subjected to biofuel
infiltration) consisting of 5% bentonite: 95% sand under pressure of
40 kPa and 100 kPa had increased by one fold. In addition, the
hydraulic conductivity of a liner consisting of 10% bentonite: 90%
sand under pressure of 40 kPa and 100 kPa and infiltrated by biofuel
had increased by three folds. On the other hand, the results obtained
by water infiltration under 40 kPa showed lower hydraulic
conductivities of 1.50×10-5 and 1.37×10-9 cm/s for 5% bentonite:
95% sand, and 10% bentonite: 90% sand, respectively. Similarly,
under 100 kPa, the hydraulic conductivities were 2.30×10-5 and
1.90×10-9 cm/s for 5% bentonite: 95% sand, and 10% bentonite: 90%
sand, respectively.
Abstract: Mobile learning (M-learning) integrates mobile
devices and wireless computing technology to enhance the current
conventional learning system. However, there are constraints which
are affecting the implementation of platform and device independent
M-learning. The main aim of this research is to fulfill the following
main objectives: to develop platform independent mobile learning
tool (M-LT) for structured programming course, and evaluate its
effectiveness and usability using ADDIE instructional design model
(ISD) as M-LT life cycle. J2ME (Java 2 micro edition) and XML
(Extensible Markup Language) were used to develop platform
independent M-LT. It has two modules lecture materials and quizzes.
This study used Quasi experimental design to measure effectiveness
of the tool. Meanwhile, questionnaire is used to evaluate the usability
of the tool. Finally, the results show that the system was effective and
also usability evaluation was positive.
Abstract: The occurrence and removal of trace organic
contaminants in the aquatic environment has become a focus of
environmental concern. For the selective removal of carbamazepine
from loaded waters molecularly imprinted polymers (MIPs) were
synthesized with carbamazepine as template. Parameters varied were
the type of monomer, crosslinker, and porogen, the ratio of starting
materials, and the synthesis temperature. Best results were obtained
with a template to crosslinker ratio of 1:20, toluene as porogen, and
methacrylic acid (MAA) as monomer. MIPs were then capable to
recover carbamazepine by 93% from a 10-5 M landfill leachate
solution containing also caffeine and salicylic acid. By comparison,
carbamazepine recoveries of 75% were achieved using a nonimprinted
polymer (NIP) synthesized under the same conditions, but
without template. In landfill leachate containing solutions
carbamazepine was adsorbed by 93-96% compared with an uptake of
73% by activated carbon. The best solvent for desorption was
acetonitrile, with which the amount of solvent necessary and dilution
with water was tested. Selected MIPs were tested for their reusability
and showed good results for at least five cycles. Adsorption
isotherms were prepared with carbamazepine solutions in the
concentration range of 0.01 M to 5*10-6 M. The heterogeneity index
showed a more homogenous binding site distribution.
Abstract: Stipples are desired for pattern fillings and
transparency effects. In contrast, some graphics standards, including
OpenGL ES 1.1 and 2.0, omitted this feature. We represent details of
providing line stipples and polygon stipples, through combining
texture mapping and alpha blending functions. We start from the
OpenGL-specified stipple-related API functions. The details of
mathematical transformations are explained to get the correct texture
coordinates. Then, the overall algorithm is represented, and its
implementation results are followed. We accomplished both of line
and polygon stipples, and verified its result with conformance test
routines.
Abstract: Recently, business environment and customer needs
have become rapidly changing, hence it is very difficult to fulfill
sophisticated customer needs by product or service innovation only. In
practice, to cope with this problem, various manufacturing companies
have developed services to combine with their products. Along with
this, many academic studies on PSS (Product Service System) which is
the integrated system of products and services have been conducted
from the viewpoint of manufacturers. On the other hand, service
providers are also attempting to develop service-supporting products
to increase their service competitiveness and provide differentiated
value. However, there is a lack of research based on the service-centric
point of view. Accordingly, this paper proposes a concept generation
method for service-supporting product development from the
service-centric point of view. This method is designed to be executed
in five consecutive steps: situation analysis, problem definition,
problem resolution, solution evaluation, and concept generation. In
the proposed approach, some tools of TRIZ (Theory of Solving
Inventive Problem) such as ISQ (Innovative Situation Questionnaire)
and 40 inventive principles are employed in order to define problems
of the current services and solve them by generating
service-supporting product concepts. This research contributes to the
development of service-supporting products and service-centric PSSs.
Abstract: When the shock front (SF) hits the central electrode
axis of plasma focus device, a reflected shock wave moves radially
outwards. The current sheath (CS) results from ionization of filled
gas between two electrodes continues to compress inwards until it
hits the out-going reflected shock front. In this paper the Lagrangian
equations are solved for a parabolic shock trajectory yielding a first
and second approximation for the CS path. To determine the
accuracy of the approximation, the same problem is solved for a
straight shock.
Abstract: The research purpose was to evaluate the effect of
Active Imagination Technique (AIT) for bruxism treatment. This
project was approved by the Ethics Committee on Human Research
(CAAE: 05619512.9.0000.0109). Twenty-one volunteers using
interocclusal splint completed the study. Initially they filled in a
questionnaire about their condition, composed of objective questions
on signs and symptoms. Following they were underwent asingle
session of AIT. After 15 days, the volunteers met again the same
initial questionnaire. The results were compared and showed that the
vast majority had pain symptoms, difficulty opening the mouth, pain
when chewing, reduced, some of the participants abandoned the
interocclusal splint during the evaluate period. It is concluded that the
technique can be used in bruxism treatment. Results seem to be
promising and demonstrates the need of highlighting Active
Imagination Technique since it points a possibility of bruxism cure
and that is unprecedented.
Abstract: In this paper Lattice Boltzmann simulation of
turbulent natural convection with large-eddy simulations (LES) in a
square cavity which is filled by water has been investigated. The
present results are validated by finds of other investigations which
have been done with different numerical methods. Calculations were
performed for high Rayleigh numbers of Ra=108 and 109. The results
confirm that this method is in acceptable agreement with other
verifications of such a flow. In this investigation is tried to present
Large-eddy turbulence flow model by Lattice Boltzmann Method
(LBM) with a clear and simple statement. Effects of increase in
Rayleigh number are displayed on streamlines, isotherm counters and
average Nusselt number. Result shows that the average Nusselt
number enhances with growth of the Rayleigh numbers.
Abstract: The refueling of a transparent rectangular fuel tank
fitted with a standard filler pipe and roll-over valve was
experimentally studied. A fuel-conditioning cart, capable of
handling fuels of different Reid vapor pressure at a constant
temperature, was used to dispense fuel at the desired rate. The
experimental protocol included transient recording of the tank and
filler tube pressures while video recording the flow patterns in the
filler tube and tank during the refueling process. This information
was used to determine the effect of changes in the vent tube
diameter, fuel-dispense flow rate and fuel Reid vapor pressure on the
pressure-time characteristics and the occurrence of premature fuel
filling shut-off and fuel spill-back. Pressure-time curves for the case
of normal shut-off demonstrated the classic, three-phase
characteristic noted in the literature. The variation of the maximum
values of tank dome and filler tube pressures are analyzed in relation
to the occurrence of premature shut-off.
Abstract: This paper aims to scale up Dye-sensitized Solar Cell
(DSSC) production using a commonly available industrial material –
stainless steel - and industrial plasma equipment. A working DSSC
electrode formed by (1) coating titania nanotube (TiO2 NT) film on
304 stainless steel substrate using a plasma spray technique; then, (2)
filling the nano-pores of the TiO2 NT film using a TiF4 sol-gel method.
A DSSC device consists of an anode absorbed photosensitive dye
(N3), a transparent conductive cathode with platinum (Pt)
nano-catalytic particles adhered to its surface, and an electrolytic
solution sealed between the anode and the transparent conductive
cathode. The photo-current conversion efficiency of the DSSC sample
was tested under an AM 1.5 Solar Simulator. The sample has a short
current (Isc) of 0.83 mA cm-2, open voltage (Voc) of 0.81V, filling
factor (FF) of 0.52, and conversion efficiency (η) of 2.18% on a 0.16
cm2 DSSC work-piece.
Abstract: Avionic software architecture has transit from a
federated avionics architecture to an integrated modular avionics
(IMA) .ARINC 653 (Avionics Application Standard Software Interface) is a software specification for space and time partitioning in
Safety-critical avionics Real-time operating systems. Methods to transform the abstract avionics application logic function to the
executable model have been brought up, however with less
consideration about the code generating input and output model specific for ARINC 653 platform and inner-task synchronous dynamic
interaction order sequence. In this paper, we proposed an
AADL-based model-driven design methodology to fulfill the purpose
to automatically generating Cµ executable model on ARINC 653 platform from the ARINC653 architecture which defined as AADL653 in order to facilitate the development of the avionics software constructed on ARINC653 OS. This paper presents the
mapping rules between the AADL653 elements and the elements in
Cµ language, and define the code generating rules , designs an automatic C µ code generator .Then, we use a case to illustrate our
approach. Finally, we give the related work and future research directions.
Abstract: The “conveyor belt" as a product represents a
complex high performance component with a wide range of different
applications. Further development of these highly complex
components demands an integration of new technologies and new
enhanced materials. In this context nanostructured fillers appear to
have a more promising effect on the performance of the conveyor
belt composite than conventional micro-scaled fillers.
Within the project “DotTrans" nanostructured fillers, for example
silicon dioxide, are used to optimize performance parameters of
conveyor belt systems. The objective of the project includes
operating parameters like energy consumption or friction
characteristics as well as adaptive parameters like cut or wear
resistance.
Abstract: Ever increasing capacities of contemporary storage devices
inspire the vision to accumulate (personal) information without
the need of deleting old data over a long time-span. Hence the target
of SemanticLIFE project is to create a Personal Information Management
system for a human lifetime data. One of the most important
characteristics of the system is its dedication to retrieve information
in a very efficient way. By adopting user demands regarding the
reduction of ambiguities, our approach aims at a user-oriented and
yet powerful enough system with a satisfactory query performance.
We introduce the query system of SemanticLIFE, the Virtual Query
System, which uses emerging Semantic Web technologies to fulfill
users- requirements.
Abstract: Artificial Intelligence based gaming is an interesting topic in the state-of-art technology. This paper presents an automation of a tradition Omani game, called Al-Hawalees. Its related issues are resolved and implemented using artificial intelligence approach. An AI approach called mini-max procedure is incorporated to make a diverse budges of the on-line gaming. If number of moves increase, time complexity will be increased in terms of propositionally. In order to tackle the time and space complexities, we have employed a back propagation neural network (BPNN) to train in off-line to make a decision for resources required to fulfill the automation of the game. We have utilized Leverberg- Marquardt training in order to get the rapid response during the gaming. A set of optimal moves is determined by the on-line back propagation training fashioned with alpha-beta pruning. The results and analyses reveal that the proposed scheme will be easily incorporated in the on-line scenario with one player against the system.
Abstract: This article summarizes ways to verify neutron
fluence for neutron transmutation doping of silicon with phosphorus
on the LVR-15 reactor. Neutron fluence is determined using
activation detectors placed along the crystal in a strip or encapsulated
in a rod holder. Holders are placed at the centre of a water-filled
capsule or in an aluminum or silicon ingot that simulates a real single
crystal. If the diameter of the crystal is significantly less than the
capsule diameter and water from the primary circuit enters the free
space in the capsule, neutron interaction in the water changes neutron
fluence, affecting axial irradiation homogeneity. The effect of
moving the capsule vertically in the channel relative to maximum
neutron fluence in the reactor core was also measured. Even a small
shift of the capsule-s centre causes great irradiation inhomogeneity.
This effect was measured using activation detectors, and was also
confirmed by MCNP calculation.
Abstract: Nowadays pharmaceutical care departments located in
hospitals are amongst the important pillars of the healthcare system.
The aim of this study was to evaluate quality of hospital drugstores
affiliated with Kermanshah University of Medical Sciences.
In this cross-sectional study a validated questionnaire was used.
The questionnaire was filled in by the one of the researchers in all
seventeen hospital drugstores located in the teaching and nonteaching
hospitals affiliated with Kermanshah University of Medical
Sciences. The results shows that in observed hospitals,24% of
pharmacy environments, 25% of pharmacy store and storage
conditions, 49% of storage procedure, 25% of ordering drugs and
supplies, 73% of receiving supplies (proper procedure are fallowed
for receiving supplies), 35% of receiving supplies (prompt action
taken if deterioration of drugs received is suspected), 23.35% of
drugs delivery to patients and finally 0% of stock cards are used for
proper inventory control have full compliance with standards.
Abstract: This paper aims at numerically analysing the effect
of an active flow control (AFC) by a vortex generator jet (VGJ)
submerged in a boundary layer via Chimera Grids and Detached-
Eddy Simulation (DES). The performance of DES results are
judged against Reynolds-Averaged Navier-Stokes (RANS) and
compared with the experiments that showed an unsteady vortex
motion downstream of VGJ. Experimental results showed that
the mechanism of embedding logitudinal vortex structure in the
main stream flow is quite effective in increasing the near wall
momentum of separated aircraft wing. In order to simulate such
a flow configuration together with the VGJ, an efficient numerical
approach is required. This requirement is fulfilled by performing
the DES simulation over the flat plate using the DLR TAU Code.
The DES predictions identify the vortex region via smooth hybrid
length scale and predict the unsteady vortex motion observed in
the experiments. The DES results also showed that the sufficient
grid refinement in the vortex region resolves the turbulent scales
downstream of the VGJ, the spatial vortex core postion and nondimensional
momentum coefficient RVx .
Abstract: Efficient storage, transmission and use of video information are key requirements in many multimedia applications currently being addressed by MPEG-4. To fulfill these requirements, a new approach for representing video information which relies on an object-based representation, has been adopted. Therefore, objectbased watermarking schemes are needed for copyright protection. This paper proposes a novel blind object watermarking scheme for images and video using the in place lifting shape adaptive-discrete wavelet transform (SA-DWT). In order to make the watermark robust and transparent, the watermark is embedded in the average of wavelet blocks using the visual model based on the human visual system. Wavelet coefficients n least significant bits (LSBs) are adjusted in concert with the average. Simulation results shows that the proposed watermarking scheme is perceptually invisible and robust against many attacks such as lossy image/video compression (e.g. JPEG, JPEG2000 and MPEG-4), scaling, adding noise, filtering, etc.
Abstract: We present an integration approach of a CMOS biosensor into a polymer based microfluidic environment suitable for mass production. It consists of a wafer-level-package for the silicon die and laser bonding process promoted by an intermediate hot melt foil to attach the sensor package to the microfluidic chip, without the need for dispensing of glues or underfiller. A very good condition of the sensing area was obtained after introducing a protection layer during packaging. A microfluidic flow cell was fabricated and shown to withstand pressures up to Δp = 780 kPa without leakage. The employed biosensors were electrically characterized in a dry environment.
Abstract: In this paper, a novel multipurpose audio watermarking
algorithm is proposed based on Vector Quantization (VQ) in Discrete
Cosine Transform (DCT) domain using the codeword labeling and
index-bit constrained method. By using this algorithm, it can fulfill the
requirements of both the copyright protection and content integrity
authentication at the same time for the multimedia artworks. The
robust watermark is embedded in the middle frequency coefficients of
the DCT transform during the labeled codeword vector quantization
procedure. The fragile watermark is embedded into the indices of the
high frequency coefficients of the DCT transform by using the
constrained index vector quantization method for the purpose of
integrity authentication of the original audio signals. Both the robust
and the fragile watermarks can be extracted without the original audio
signals, and the simulation results show that our algorithm is effective
with regard to the transparency, robustness and the authentication
requirements