Parametric Investigation of Aircraft Door’s Emergency Power Assist System (EPAS)

Fluid viscous damping systems are well suited for
many air vehicles subjected to shock and vibration. These damping
system work with the principle of viscous fluid throttling through the
orifice to create huge pressure difference between compression and
rebound chamber and obtain the required damping force. One
application of such systems is its use in aircraft door system to
counteract the door’s velocity and safely stop it. In exigency
situations like crash or emergency landing where the door doesn’t
open easily, possibly due to unusually tilting of fuselage or some
obstacles or intrusion of debris obstruction to move the parts of the
door, such system can be combined with other systems to provide
needed force to forcefully open the door and also securely stop it
simultaneously within the required time i.e. less than 8 seconds. In
the present study, a hydraulic system called snubber along with other
systems like actuator, gas bottle assembly which together known as
emergency power assist system (EPAS) is designed, built and
experimentally studied to check the magnitude of angular velocity,
damping force and time required to effectively open the door.
Whenever needed, the gas pressure from the bottle is released to
actuate the actuator and at the same time pull the snubber’s piston to
operate the emergency opening of the door. Such EPAS installed in
the suspension arm of the aircraft door is studied explicitly changing
parameters like orifice size, oil level, oil viscosity and bypass valve
gap and its spring of the snubber at varying temperature to generate
the optimum design case. Comparative analysis of the EPAS at
several cases is done and conclusions are made. It is found that
during emergency condition, the system opening time and angular
velocity, when snubber with 0.3mm piston and shaft orifice and
bypass valve gap of 0.5 mm with its original spring is used, shows
significant improvement over the old ones.

• Marshal D. Kafle
• Jun H. Kim
• Hyun W. Been
• Kyoung M. Min
• Sung H. Kim

• Aircraft Door Damper
• Bypass Valve
• Emergency Power Assist System
• Hydraulic Damper
• Oil viscosity.

[1] R.D. Eyres, “Modelling and Dynamic Response of a Damper with Relief
Valve,” Bristol Laboratory for Advanced Dynamic Engineering,
University of Bristol, Elsevier Science, 2003.
[2] D. Kress, “Emergency Opening System for an Aircraft Cabin Door”,
Eurocopter Deutschland GmbH, EP 2644495 A1.
[3] M.D. Symans, “Passive Fluid Viscous Damping Systems for Seismic
Energy Dissipation,” ISET Journal of Earthquake Technology, Vol. 35,
No. 4, 1998, pp185~206.
[4] Y. Hou, L., “Shock Absorber Modeling and Simulation Based on
Modelica,” Proceedings 8th Modelica Conference, Dresden, Germany,
2011, pp 843~846.
[5] N.V. Satpute, “Fluid Flow Modelling of a Fluid Damper with Shim
Loaded Relief Valve,” International Journal of Mechanical Engineering,
Vol. 2, Issue 1, 2013, pp. 65~74.
[6] M.P. Conner, “Hydraulic Snubber for Aircraft,” The Boeings Company,
Seattle, Washington. 1997.
[7] G.E. Totten, “Handbook of Hydraulic Fluid Technology, Second
Edition,” CRC Press, 2011.
[8] Y.C. Kwon, “Design of Throttle Orifices for an Aircraft Door Damper,” Vol. 9, No. 3, 2012, pp 23~28.