Numerical Simulation of Flow Field in a Elliptic Bottom Stirred Tank with Bottom Baffles

When the crisscross baffles and logarithmic spiral baffles are placed on the bottom of the stirred tank with elliptic bottom, using CFD software FLUENT simulates the velocity field of the stirred tank with elliptic bottom and bottom baffles. Compare the velocity field of stirred tank with bottom crisscross baffle to the velocity field of stirred tank without bottom baffle and analysis the flow pattern on the same axis-section and different cross-sections. The sizes of the axial and radial velocity are compared respectively when the stirred tank with bottom crisscross baffles, bottom logarithmic spiral baffles and without bottom baffle. At the same time, the numerical calculations of mixing power are compared when the stirred tank with bottom crisscross baffles and bottom logarithmic spiral baffles. Research shows that bottom crisscross baffles and logarithmic spiral baffles have a great impact on flow pattern within the reactor and improve the mixing effect better than without baffle. It also has shown that bottom logarithmic spiral baffles has lower power consumption than bottom crisscross baffles.




References:
[1] Lu Wei-Ming, Wu Hong-Zhang, Ju Ming-Ying, "Effects of baffle
design on the liquid mixing in an aerated stirred tank with standard
Rushton turbine impellers," Chemical Engineering Science, vol. 52,
issue 21, pp. 3843-3851, Apr. 1997.
[2] Fitch,A.W., Ni,X., Stewart,J., "Characterisation of flexible baffles in
an oscillatory baffled column," Journal of Chemical Technology and
Biotechnology, vol. 76, issue 10, pp. 1074-1079, May 2001.
[3] Guo, Du-Xin, Hao, Hui-Di, Wei, Yu-Mei, and Liu, Qing-Chang, "New
type mixer - Central ascending screwy flow mixer," Chemical
Engineering, vol. 30, issue 4, , pp. 28-31, 2002.
[4] CHEN FENG, HUANG Xiong-Bin, "Mixing Character of Two Kinds of
Installation of the Mixer with Baffle Assessed," Chemical Research, vol.
14, issue 1, pp. 48-50, Mar. 2003.
[5] TONG Li-jun, "Study on Baffle in Mechanical Agitating Tank,"
Non-ferrous Metallurgical Equipment 03, pp. 17-18, 2005.
[6] SHEN Chun-yin, "CHEN Jian-pei; ZHANG Jia-ting and DAI Gan-ce.
Performance and Design of Baffles in Mechanically Agitated Gas-liquid
Reactor," Journal of Chemical Engineering of Chinese Universities, vol.
19, issue 2, pp. 163-167, Apr 2005.
[7] Andrej Bombac, Iztok Zun, "Individual impeller flooding in aerated
vessel stirred by multiple Rushton impellers," Chemical Engineering
Journal 116, pp. 85-95, 2006.
[8] M.H. Vakili, M. Nasr Esfahany, "CFD analysis of turbulence in a baffled
stirred tank, a three-compartment model," Chemical Engineering
Science 64, pp. 351-362, 2009.
[9] S.Bhattacharya, D.Hebert and S.M.Kresta, "air entrainment in baffled
stirred Tanks," Chemical Engineering Research and Design, vol. 85,
no.5, pp. 654-664, 2007.
[10] M.Al-Sammarraee,A.Chan, "Large-eddy simulations of particle s
edimentation in a longitudinal sedimentation basin of a water treatment
plant. Part 2: The effects of baffles," Chemical Engineering Journal 152,
pp. 315-321, 2009.
[11] G.M. Cartland Glover, J.J.Fitzpatrick, "Modelling vortex formation in an
unbaffled stirred tank reactors," Chemical Engineering Journal 127, pp.
11-22, 2007.
[12] H. Hartmann, J.J. Derksen, H.E.A.van den Akker, "Numerical
simulation of a dissolution process in a stirred tank reactor," Chemical
Engineering Science 61, pp. 3025-3032, 2006.
[13] WANG KAI, YU JUN, agitator mill, Beijing: Chemical Industry Press,
2003, pp.34-36.
[14] DONG BIN-gang, ZHANG Bin-xuan and Cui ER-jie, Unsteady flow
and vortex motion, Beijing: National Defence Industrial Press, 1993,
pp.118-119.
[15] WANG Le-qin, DU Hong-xia, WU Da-zhuang, "Numerical Simulation
of Mixing Process In Stirred Tank with Multiple Impellers," Journal of
Engineering Thermophysics, vol. 28, issue 3, pp. 418-420, May 2007.