Magnetic End Leakage Flux in a Spoke Type Rotor Permanent Magnet Synchronous Generator

The spoke type rotor can be used to obtain magnetic
flux concentration in permanent magnet machines. This allows the
air gap magnetic flux density to exceed the remanent flux density
of the permanent magnets but gives problems with leakage fluxes
in the magnetic circuit. The end leakage flux of one spoke type
permanent magnet rotor design is studied through measurements and
finite element simulations. The measurements are performed in the
end regions of a 12 kW prototype generator for a vertical axis
wind turbine. The simulations are made using three dimensional
finite elements to calculate the magnetic field distribution in the
end regions of the machine. Also two dimensional finite element
simulations are performed and the impact of the two dimensional
approximation is studied. It is found that the magnetic leakage flux
in the end regions of the machine is equal to about 20% of the flux
in the permanent magnets. The overestimation of the performance by
the two dimensional approximation is quantified and a curve-fitted
expression for its behavior is suggested.

Authors:

• Petter Eklund
• Jonathan Sjölund
• Sandra Eriksson
• Mats Leijon

Keywords:

• End effects
• end leakage flux
• permanent magnet machine
• spoke type rotor.

References:

[1] S. Eriksson and H. Bernhoff, “Rotor design for PM generators reflecting
the unstable neodymium price,” in XXth International Conference on
Electrical Machines, Sept 2012, pp. 1419–1423.
[2] W. Kakihara, M. Takemoto, and S. Ogasawara, “Rotor structure in
50 kW spoke-type interior permanent magnet synchronous motor with
ferrite permanent magnets for automotive applications,” in IEEE Energy
Conversion Congress and Exposition, Sept 2013, pp. 606–613.
[3] X. Ge, Z. Q. Zhu, J. B. Li, and J. T. Chen, “A spoke-type IPM machine
with novel alternate airspace barriers and reduction of unipolar leakage
flux by step-staggered rotor,” in IEEE International Electric Machines
Drives Conference (IEMDC), May 2015, pp. 53–59. [4] P. Eklund, S. Sjökvist, S. Eriksson, and M. Leijon, “A complete design
of a rare earth metal-free permanent magnet generator,” Machines, vol. 2,
no. 2, p. 120, 2014.
[5] S. Eriksson, A. Solum, M. Leijon, and H. Bernhoff, “Simulations and
experiments on a 12 kW direct driven PM synchronous generator for
wind power,” Renewable Energy, vol. 33, no. 4, pp. 674–681, 2008.
[6] P. Eklund and S. Eriksson, “Air gap magnetic flux density variations
due to manufacturing tolerances in a permanent magnet synchronous
generator,” in XXII International Conference on Electrical Machines
(ICEM), Sept 2016, pp. 93–99.