Integration of LCA and BIM for Sustainable Construction
The construction industry is turning towards sustainability. It is a well-known fact that sustainability is based on a balance between environmental, social and economic aspects. In order to achieve sustainability efficiently, these three criteria should be taken into account in the initial project phases, since that is when a project can be influenced most effectively. Thus the aim must be to integrate important tools like BIM and LCA at an early stage in order to make full use of their potential. With the synergies resulting from the integration of BIM and LCA, a wider approach to sustainability becomes possible, covering the three pillars of sustainability.
[1] ISO, "ISO standard set to reduce environmental impact of buildings”. 2010 (Online) Available at: http://www.iso.org/iso/home/news_index/ news_archive/news.htm?refid=Ref1344 (Accessed 28 May 2013).
[2] Adapt4EE Consortium,."Adapt4EE. 7th Framework Programme, 2012 (Online) Available at: http://www.adapt4ee.eu/adapt4ee/project/ motivation.html (Accessed 28 May 2013).
[3] Novem, "Sustainable housing policies in Europe”, 3rd European Ministers Conference on sustainable housing, Belgium, 2002.
[4] O. Nawari, "BIM Standard in Off-Site Construction,” Journal of Architectural Engineering, vol. 18(2), June 2012, pp. 107 – 113.
[5] M. M. Khasreen, P. F. Banfill and G. F. Menzies, "Life-Cycle Assessment and the Environmental Impact of Buildings: A Review.” Sustainability, vol. 1(3), Jan. 2009, pp. 674 – 701.
[6] R. Burke, "Project Management. Planning and Control Techniques”, 3rd ed., John Wiley & Sons LTD, Chichester, 2001, pp. 26 – 31.
[7] Organization for Economic Co-operation and Development, "Design of sustainable building policies: scope for improvement and barriers,” Working Party on National Environmental Policy, Jun. 2002.
[8] European Foundation, "Trends and drivers of change in the European construction sector: Mapping report,” European Foundation for the Improvement of Living and Working Conditions, Dublin, 2005.
[9] C. Eastman, P. Teicholz, R. Sacks, and K. Liston, "BIM Handbook. A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers, and Contractors,” 2nd ed., New Jersey: John Wiley & Sons, Inc., 2011.
[10] S. O. Cheung, S. P. Wong, and H.C. Suen, "Behavioral aspects in construction partnering,” International Journal of Project Management , vol. 21, pp. 333-343, 2003.
[11] J. Sjøgren, buildingSMART Norge, 2011. (Online) Available at: http://www.buildingsmart.no/article87.html (Accessed 20 June 2013).
[12] WSP and Kairos Future, WSP, 2011. (Online) Available at: http://www.wspgroup.com/en/wsp-group-bim/10-truth-bim/ (Accessed 18 May 2013).
[13] W. Chong, S. Kumar, C. Haas, S. Beheiry, L. Coplen, and M. Oey, "Understanding and Interpreting Baseline Perceptions of Sustainability in Construction among Civil Engineers in the United States,” Journal of management in engineering, vol. 25 (3), July 2009, pp. 143-154.
[14] Bundesministerium für Verkehr, Bau und Stadtentwicklung, "Mögliche Ursachen für Kosten-und Terminüberschreitungen bei der Realisierung von Großprojekten,” Sitzung Reformkommission Bau von Großprojekten am 17.04.2013, Berlin, April 2013. (Online) Available at: http://www.bmvi.de//SharedDocs/DE/Artikel/UI/reformkommission-bau-von-grossprojekten.html?nn=38976 (Accessed 19 June 2013).
[15] HM Government, "Industrial strategy: government and industry in partnership. Building Information Modelling”, 2012.
[16] C-SanD, "Sustainable Development and Sustainable Construction”, Loughboroung University, 2001.
[17] Taskforce on sustainable construction, "Accelerating the Development of the Sustainable Construction Market in Europe,” Report of the taskforce on sustainable construction composed in preparation of the communication "A lead market initiative for Europe, 2007.
[18] McGraw-Hill Construction, "The Business Value of BIM in Europe. Getting Building Information Modeling to the Bottom Line in the United Kingdom, France and Germany,” SmartMarket Report, Bedford: McGraw-Hill Construction, 2010.
[19] Autodesk, 2005. "Building Information Modeling for Sustainable Design,” Autodesk, Inc., 2005. (Online) Available at: http://images.autodesk.com/adsk/files/bim_for_sustainable_design_jun05.pdf (Accessed 14 May 2013).
[20] European Commission, European Platform on Life Cycle Assessment (LCA), 2012. (Online) Available at: http://ec.europa.eu/environment/ ipp/lca.htm (Accessed 13 July 2013).
[21] Georgia Institute of Technology, "AIA Guide to Building Life Cycle Assessment in Practice,” Washington DC: American Institute of Architects, 2010. (Online) Available at: http://www.aia.org/practicing/ akr/AIAB089185 (Accessed 22 April 2013).
[22] M. Buyle, J. Braet, and A. Audenaert, "LCA in the construction industry: a review,” Renewable and Sustainable Energy Reviews, vol. 26, Oct. 2013, pp. 379 – 388.
[23] ENSLIC, "Energy Saving through Promotion of Life Cycle Assessment in Buildings”, Intelligent Energy Europe, European Commission, 2007 (Online) Available at: http://circe.cps.unizar.es/enslic/texto/proj.html (Accessed 5 July 2013).
[24] ISO 14040:2006, "Environmental management- Life cycle assessment- Principles and framework”. (Online) Available at: http://www.iso.org/ iso/catalogue_detail.htm?csnumber=37456 (Accessed 24 June 2013).
[25] W. Tritthart, H. Staller, I. Zabalza, T. Malmqvist, B. Peuportier, C. Wetzel, M. Hajpal, E. Stoykova, G. Krigsvoll, " LoRe-LCA State of the art report - Use of Life cycle assessment Methods and tools,” Low Resource consumption buildings and constructions by use of LCA in design and decision making, Deliverable D2.1 a+b, FP7-ENV-2007-1-LoRe-LCA-212531, Dec. 2010.
[26] T. Hakkinen and A. Kiviniemi, "Sustainable Building and BIM. Melbourne,” World Sustainable Building Conference SB08, Melbourne, Sept. 2008, CSIRO Commonwealth Scientific and Industrial Research Organization.
[27] J. Díaz and L. Álvarez Antón, "Sustainable construction approach through integration of LCA and BIM tools,” ICCCBE 2014 Conference, submitted for publication.
[28] L. Álvarez Antón and J. Díaz, "Integration of Life Cycle Assessment in a BIM environment,” Creative Construction Conference 2014, submitted for publication.
[1] ISO, "ISO standard set to reduce environmental impact of buildings”. 2010 (Online) Available at: http://www.iso.org/iso/home/news_index/ news_archive/news.htm?refid=Ref1344 (Accessed 28 May 2013).
[2] Adapt4EE Consortium,."Adapt4EE. 7th Framework Programme, 2012 (Online) Available at: http://www.adapt4ee.eu/adapt4ee/project/ motivation.html (Accessed 28 May 2013).
[3] Novem, "Sustainable housing policies in Europe”, 3rd European Ministers Conference on sustainable housing, Belgium, 2002.
[4] O. Nawari, "BIM Standard in Off-Site Construction,” Journal of Architectural Engineering, vol. 18(2), June 2012, pp. 107 – 113.
[5] M. M. Khasreen, P. F. Banfill and G. F. Menzies, "Life-Cycle Assessment and the Environmental Impact of Buildings: A Review.” Sustainability, vol. 1(3), Jan. 2009, pp. 674 – 701.
[6] R. Burke, "Project Management. Planning and Control Techniques”, 3rd ed., John Wiley & Sons LTD, Chichester, 2001, pp. 26 – 31.
[7] Organization for Economic Co-operation and Development, "Design of sustainable building policies: scope for improvement and barriers,” Working Party on National Environmental Policy, Jun. 2002.
[8] European Foundation, "Trends and drivers of change in the European construction sector: Mapping report,” European Foundation for the Improvement of Living and Working Conditions, Dublin, 2005.
[9] C. Eastman, P. Teicholz, R. Sacks, and K. Liston, "BIM Handbook. A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers, and Contractors,” 2nd ed., New Jersey: John Wiley & Sons, Inc., 2011.
[10] S. O. Cheung, S. P. Wong, and H.C. Suen, "Behavioral aspects in construction partnering,” International Journal of Project Management , vol. 21, pp. 333-343, 2003.
[11] J. Sjøgren, buildingSMART Norge, 2011. (Online) Available at: http://www.buildingsmart.no/article87.html (Accessed 20 June 2013).
[12] WSP and Kairos Future, WSP, 2011. (Online) Available at: http://www.wspgroup.com/en/wsp-group-bim/10-truth-bim/ (Accessed 18 May 2013).
[13] W. Chong, S. Kumar, C. Haas, S. Beheiry, L. Coplen, and M. Oey, "Understanding and Interpreting Baseline Perceptions of Sustainability in Construction among Civil Engineers in the United States,” Journal of management in engineering, vol. 25 (3), July 2009, pp. 143-154.
[14] Bundesministerium für Verkehr, Bau und Stadtentwicklung, "Mögliche Ursachen für Kosten-und Terminüberschreitungen bei der Realisierung von Großprojekten,” Sitzung Reformkommission Bau von Großprojekten am 17.04.2013, Berlin, April 2013. (Online) Available at: http://www.bmvi.de//SharedDocs/DE/Artikel/UI/reformkommission-bau-von-grossprojekten.html?nn=38976 (Accessed 19 June 2013).
[15] HM Government, "Industrial strategy: government and industry in partnership. Building Information Modelling”, 2012.
[16] C-SanD, "Sustainable Development and Sustainable Construction”, Loughboroung University, 2001.
[17] Taskforce on sustainable construction, "Accelerating the Development of the Sustainable Construction Market in Europe,” Report of the taskforce on sustainable construction composed in preparation of the communication "A lead market initiative for Europe, 2007.
[18] McGraw-Hill Construction, "The Business Value of BIM in Europe. Getting Building Information Modeling to the Bottom Line in the United Kingdom, France and Germany,” SmartMarket Report, Bedford: McGraw-Hill Construction, 2010.
[19] Autodesk, 2005. "Building Information Modeling for Sustainable Design,” Autodesk, Inc., 2005. (Online) Available at: http://images.autodesk.com/adsk/files/bim_for_sustainable_design_jun05.pdf (Accessed 14 May 2013).
[20] European Commission, European Platform on Life Cycle Assessment (LCA), 2012. (Online) Available at: http://ec.europa.eu/environment/ ipp/lca.htm (Accessed 13 July 2013).
[21] Georgia Institute of Technology, "AIA Guide to Building Life Cycle Assessment in Practice,” Washington DC: American Institute of Architects, 2010. (Online) Available at: http://www.aia.org/practicing/ akr/AIAB089185 (Accessed 22 April 2013).
[22] M. Buyle, J. Braet, and A. Audenaert, "LCA in the construction industry: a review,” Renewable and Sustainable Energy Reviews, vol. 26, Oct. 2013, pp. 379 – 388.
[23] ENSLIC, "Energy Saving through Promotion of Life Cycle Assessment in Buildings”, Intelligent Energy Europe, European Commission, 2007 (Online) Available at: http://circe.cps.unizar.es/enslic/texto/proj.html (Accessed 5 July 2013).
[24] ISO 14040:2006, "Environmental management- Life cycle assessment- Principles and framework”. (Online) Available at: http://www.iso.org/ iso/catalogue_detail.htm?csnumber=37456 (Accessed 24 June 2013).
[25] W. Tritthart, H. Staller, I. Zabalza, T. Malmqvist, B. Peuportier, C. Wetzel, M. Hajpal, E. Stoykova, G. Krigsvoll, " LoRe-LCA State of the art report - Use of Life cycle assessment Methods and tools,” Low Resource consumption buildings and constructions by use of LCA in design and decision making, Deliverable D2.1 a+b, FP7-ENV-2007-1-LoRe-LCA-212531, Dec. 2010.
[26] T. Hakkinen and A. Kiviniemi, "Sustainable Building and BIM. Melbourne,” World Sustainable Building Conference SB08, Melbourne, Sept. 2008, CSIRO Commonwealth Scientific and Industrial Research Organization.
[27] J. Díaz and L. Álvarez Antón, "Sustainable construction approach through integration of LCA and BIM tools,” ICCCBE 2014 Conference, submitted for publication.
[28] L. Álvarez Antón and J. Díaz, "Integration of Life Cycle Assessment in a BIM environment,” Creative Construction Conference 2014, submitted for publication.
@article{"International Journal of Business, Human and Social Sciences:67155", author = "Laura Álvarez Antón and Joaquín Díaz", title = "Integration of LCA and BIM for Sustainable Construction", abstract = "The construction industry is turning towards sustainability. It is a well-known fact that sustainability is based on a balance between environmental, social and economic aspects. In order to achieve sustainability efficiently, these three criteria should be taken into account in the initial project phases, since that is when a project can be influenced most effectively. Thus the aim must be to integrate important tools like BIM and LCA at an early stage in order to make full use of their potential. With the synergies resulting from the integration of BIM and LCA, a wider approach to sustainability becomes possible, covering the three pillars of sustainability.
", keywords = "Building Information Modeling (BIM), Construction Industry, Design Phase, Life Cycle Assessment (LCA), Sustainability. ", volume = "8", number = "5", pages = "1391-5", }
