Fabrication and Analysis of Bulk SiCp Reinforced Aluminum Metal Matrix Composites using Friction Stir Process

In this study, Friction Stir Processing (FSP) a recent grain refinement technique was employed to disperse micron-sized (2 *m) SiCp particles into aluminum alloy AA6063. The feasibility to fabricate bulk composites through FSP was analyzed and experiments were conducted at different traverse speeds and wider volumes of the specimens. Micro structural observation were carried out by employing optical microscopy test of the cross sections in both parallel and perpendicular to the tool traverse direction. Mechanical property including micro hardness was evaluated in detail at various regions on the specimen. The composites had an excellent bonding with aluminum alloy substrate and a significant increase of 30% in the micro hardness value of metal matrix composite (MMC) as to that of the base metal has observed. The observations clearly indicate that SiC particles were uniformly distributed within the aluminum matrix.

• M.Puviyarasan
• C.Praveen

• Friction Stir Processing
• Metal matrix composite
• Bulk composite.

[1] A novel way to produce bulk SiCp reinforced aluminum
metal matrix composites by friction stir processing, Wei
Wang, Qing-yu Shi, Peng Liu, Hong-ke Li, Ting Li
[2] Investigation of mechanical properties of Cu/SiC composite
fabricated by fsp: effect of SiC particles size and volume
fraction M.Barmouz
[3] Surface modification of aluminium by friction stir
processing, Adem Kurta, Ilyas Uygurb, Eren Cetec
[4] On the role of processing parameters in producing Cu/SiC
metal matrix composites via friction stir
processing:Investigating microstructure, microhardness, wear
and tensile behavior, Mohsen Barmouza, Mohammad Kazem,
Besharati Givia, Javad Seyfib
[5] Effect of friction stir processing on the microstructure of cast
A356 aluminum, Z.Y. Ma, S.R. Sharma, R.S. Mishra B
[6] Mg based nano-composites fabricated by friction stir
processing, C.J. Lee, J.C. Huang, P.J. Hsieh
[7] Nickel particle embedded aluminium matrix composite with
high ductility, Devinder Yadav, Ranjit Bauri
[8] Friction stir processing: a novel technique for fabrication of
surface Composite, R.S. Mishra, Z.Y. Ma, I. Charit.