Experimental Investigation on the Optimal Operating Frequency of a Thermoacoustic Refrigerator

This paper presents effects of the mean operating
pressure on the optimal operating frequency based on temperature
differences across stack ends in a thermoacoustic refrigerator. In
addition to the length of the resonance tube, components of the
thermoacoustic refrigerator have an influence on the operating
frequency due to their acoustic properties, i.e., absorptivity,
reflectivity and transmissivity. The interference of waves incurs and
distorts the original frequency generated by the driver so that the
optimal operating frequency differs from the designs. These acoustic
properties are not parameters in the designs and be very complicated
to infer their responses. A prototype thermoacoustic refrigerator is
constructed and used to investigate its optimal operating frequency
compared to the design at various operating pressures. Helium and air
are used as working fluids during the experiments. The results
indicate that the optimal operating frequency of the prototype
thermoacoustic refrigerator using helium is at 6 bar and 490Hz or
approximately 20% away from the design frequency. The optimal
operating frequency at other mean pressures differs from the design
in an unpredictable manner, however, the optimal operating
frequency and pressure can be identified by testing.





References:
[1] G.W. Swift, “Thermoacoustic engines,” Journal of the Acoustical
Society of America, vol.84, pp.1145-1180, 1988.
[2] M.E.H. Tijani, J.C.H. Zeegers, and A.T.A.M. De Waele, “Design of
thermoacoustic refrigerators,” Cryogenics, vol.42, pp.49-57, 2002.
[3] M. Wetzel, and C. Herman, “Design optimization of thermoacoustic
refrigerators,” International Journal of Refrigeration, vol.20, pp.3-21,
1997.
[4] E.C. Nsofor and A. Ali, “Experimental study on the performance of the
thermoacoustic refrigerating system,” Applied Thermal Engineering,
vol.29, pp.2672-2679, 2009.
[5] M.E.H. Tijani, Loudspeaker-driven thermo-acoustic refrigeration,
Mechanical Engineering, Eindhoven University of Technology,
Eindhoven, 2001.
[6] K. Assawamartbunlue and C. Wantha, “The impact of the resonance
tube on performance of a thermoacoustic stack”, Frontiers in Heat and
Mass Transfer, vol. 2, pp.1-8, 2011.
[7] T.J. Hofler, Thermoacoustic Refrigerator Design and Performance,
University of California at San Diego, 1986.