Evaluation of Deformable Boundary Condition Using Finite Element Method and Impact Test for Steel Tubes

Stainless steel pipelines are crucial components to transportation and storage in the oil and gas industry. However, the rise of random attacks and vandalism on these pipes for their valuable transport has led to more security and protection for incoming surface impacts. These surface impacts can lead to large global deformations of the pipe and place the pipe under strain, causing the eventual failure of the pipeline. Therefore, understanding how these surface impact loads affect the pipes is vital to improving the pipes’ security and protection. In this study, experimental test and finite element analysis (FEA) have been carried out on EN3B stainless steel specimens to study the impact behaviour. Low velocity impact tests at 9 m/s with 16 kg dome impactor was used to simulate for high momentum impact for localised failure. FEA models of clamped and deformable boundaries were modelled to study the effect of the boundaries on the pipes impact behaviour on its impact resistance, using experimental and FEA approach. Comparison of experimental and FE simulation shows good correlation to the deformable boundaries in order to validate the robustness of the FE model to be implemented in pipe models with complex anisotropic structure.

• Abed Ahmed
• Mehrdad Asadi
• Jennifer Martay

• Dynamic impact
• deformable boundary conditions
• finite element modeling
• FEM
• finite element
• FE
• LS-DYNA
• Stainless steel pipe.

[1] Corbett, G. G., Reid, S. R. and Al-Hassani, S. T. S. (1990) ‘Static and dynamic penetration of steel tubes by hemispherically nosed punches’, International Journal of Impact Engineering, 9(2), pp. 165–190. doi: 10.1016/0734-743X(90)90011-J.
[2] Jones, N. et al. (1992) ‘An Experimental Study on the Lateral Impact of Fully Clamped Mild Steel Pipes’, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 206(2), pp. 111–127. doi: 10.1243/PIME_PROC_1992_206_207_02.
[3] Jones, N. and Birch, R. S. (1996) ‘Influence of internal pressure on the impact behavior of steel pipelines’, Journal of Pressure Vessel Technology, Transactions of the ASME. American Society of Mechanical Engineers Digital Collection, 118(4), pp. 464–471. doi: 10.1115/1.2842215.
[4] Jones, N. and Shen, W. Q. (1992) ‘A Theoretical Study of the Lateral Impact of Fully Clamped Pipelines’, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 206(2), pp. 129–146. doi: 10.1243/PIME_PROC_1992_206_208_02.
[5] Jones, N. and Birch, R. S. (2010) ‘Low-velocity impact of pressurised pipelines’, International Journal of Impact Engineering. Elsevier Ltd, 37(2), pp. 207–219. doi: 10.1016/j.ijimpeng.2009.05.006.
[6] ASTM D2444 - 19 Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) (no date). Available at: https://www.astm.org/Standards/D2444.htm (Accessed: 16 April 2020).
[7] Livermore Software Technology Corporation (2003) L{S}-{DYNA} - {K}eyword {U}ser’s {M}anual, Version 970.