Effect of Vibration Amplitude and Welding Force on Weld Strength of Ultrasonic Metal Welding

Ultrasonic metal welding has been the subject of ongoing research and development, most recently concentrating on metal joining in miniature devices, for example to allow solder-free wire bonding. As well as at the small scale, there are also opportunities to research the joining of thicker sheet metals and to widen the range of similar and dissimilar materials that can be successfully joined using this technology. This study presents the design, characterisation and test of a lateral-drive ultrasonic metal spot welding device. The ultrasonic metal spot welding horn is modelled using finite element analysis (FEA) and its vibration behaviour is characterised experimentally to ensure ultrasonic energy is delivered effectively to the weld coupon. The welding stack and fixtures are then designed and mounted on a test machine to allow a series of experiments to be conducted for various welding and ultrasonic parameters. Weld strength is subsequently analysed using tensile-shear tests. The results show how the weld strength is particularly sensitive to the combination of clamping force and ultrasonic vibration amplitude of the welding tip, but there are optimal combinations of these and also limits that must be clearly identified.

Authors:

• Ziad. Sh. Al Sarraf

Keywords:

• Ultrasonic welding
• vibration amplitude
• welding force
• weld strength.

References:

[1] Graff, K. and Bloss, M., 2008, Understanding ultrasonic welding. Available from: http://www.thefabricator.com/article/arcwelding/ understanding-ultrasonic-welding. (accessed 30th September 2008)
[2] Ahmed, N., 2005, New developmets in advanced welding. Woodhead publishing. 298.
[3] Bloss, M. and Graff, K., 2009, Ultrasonic Metal Welding of Advanced Alloys: The Weldability of Stainless Steel, Titanium, and Nickel-Based Superalloys. in Trends in Welding Research, Proceedings of the 8th International conference. ASM International.
[4] Kim, S., Jang, H., Kim, E., and Park, D., Vibration Analysis of Ultrasonic Metal Welding Horn for Optimal Design. Proc. Int. Conf. Mechanical, Industrial and Manufacturing Technologies (MIMT) 2010. Sanya, China.
[5] Staff, P.D.L., Handbook of Plastics Joining, 2008, William Andrew Publishing Plastics Design Library.
[6] ASTM International Codes, 2009, Standard Test Methods for Tension Testing of Metallic Materials, p. 1-24.
[7] British Standard Codes, 2009, Test Pieces and Test Methods for Metallic Materials for Aircraft. Metric Units, p. 1-7.
[8] Hiraishi, M. and Watanabe, T., 2003, Improvement of Ultrasonic Weld Strength for Al-Mg Alloy by Adhesion of Alcohol, Quarterly Journal of the Japan Welding Society, 21(2), p. 295-301.