Effect of Preloading on the Contact Stress Distribution of a Dovetail Interface

This paper presents the influence of preloading on a) the contact tractions, b) slip levels and c) stresses at the dovetail blade-disc interface of an aero-engine through a three-dimensional (3D) finite element (FE) modeling and analysis. The preloading is applied by an interference fit at the dovetail interface and the bulk loading is applied through the rotational speed of rotor. Preloading at the dovetail interface reduces the peak contact pressure developed due to bulk loading up to 35%, and reduces the peak contact pressure and stress difference between top and bottom contact edges. Increasing the level of preloading reduces the cyclic stress amplitude at the interface up to certain values of preload and as a consequence, an improvement in fatigue life could be expected. Fretting damage, due to vibration and wind milling effect during engine ground condition, can be minimized by preloading the dovetail interface.

Authors:

• Kaliyaperumal Anandavel
• Raghu V. Prakash
• Antonio Davis

Keywords:

• Dovetail interface
• Preload
• Interference fit
• ContactStress
• Fretting Fatigue.

References:

[1] N. S. Xi, P. D. Zhong, H. Q. Huang, H. Yan and C. H. Tao, "Failure
investigation of blade and disc in first stage compressor", Engineering
Failure Analysis, vol. 7, pp. 385-392, 2002.
[2] J. C. Gautreau, N.F. Martin, and C. A. Rickert, "Compressor blade with
dovetail slotted to reduces stress on the airfoil leading edge", Patent No.
US7121803B2, October 17, 2006
[3] J. C. Przytulski and M. C. Hemsworth, "Apparatus for preloading an
airfoil loading in a gas turbine engine", Patent No. US5123813, June 23,
1992.
[4] C. T. Tsai and Shankar Mall. "Elasto-plastic finite element analysis of
fretting stresses in pre-stressed strip in contact with cylindrical pad",
Finite Elements in Analysis and Design, vol. 36, pp. 171-187, 2000.
[5] P. H. B. Boddington, K.C. Chen and C. Ruiz, "Numerical stress analysis
of dovetail joints", Journal of Computers and Structures, vol. 2(4), pp.
731-735, 1985.
[6] C. Ruiz, P. H. B. Boddington and K.C. Chen, "An investigation of
fatigue and fretting in a dovetail attachment", Experimental Mechanics,
pp. 208-217, 1984.
[7] S. A. Meguid, M. H. Refaat and P. Papanikos, "Theoretical and
experimental studies of structural integrity of dovetail joints in aero
engine discs", Journal of Material Technology, vol. 56, pp. 1539-1547,
1996.
[8] G. B. Sinclair, N.G. Cormier, J. H. Griffin and G. Meda, "Contact
Stresses in dovetail attachments: Finite element modeling", J. Engng.
Gas Turbine Power, vol. 124, pp. 182-189, 2002, 124.
[9] M. M. I. Hammouda, R. A. Pasha, and A. S. Fayed "Modelling of
cracking sites/development in axial dovetail joints of aero-engine
compressor discs", International Journal of Fatigue, vol. 29, pp. 30-48,
2007.
[10] P. Papanikos, S. A. Meguid, and Z. Stjepanovic, "Three dimensional
nonlinear finite element analysis of dovetail joints in aero engines disc",
Finite Element in Analysis and Design, vol. 29, pp. 668-677, 1998.
[11] J. R. Beisheim, and B. G. Sinclair, "On the three-dimensional finite
element analysis of dovetail attachments", in Proc. of ASME TURBO
EXPO 2002, Amsterdam, The Netherlands, 3-6 June 2002, pp. 1-11.
[12] R. B. Waterhouse, Fretting Fatigue, Applied science publishers Ltd.,
London
[13] ANSYS 11.0 Users Documentation, 2007.
[14] Peter Wrigger, Computational Contact Mechanics. The Netherlands:
Springer, 2006.