Early Age Behavior of Wind Turbine Gravity Foundations

Wind turbine gravity foundations are designed to resist overturning failure through gravitational forces resulting from their masses. Owing to the relatively high volume of the cementitious material present, the foundations tend to suffer thermal strains and internal cracking due to high temperatures and temperature gradients depending on factors such as geometry, mix design and level of restraint. This is a result of a fully coupled mechanism commonly known as THMC (Thermo- Hygro - Mechanical - Chemical) coupling whose kinetics peak during the early age of concrete. The focus of this paper is therefore to present and offer a discussion on the temperature and humidity evolutions occurring in mass pours such as wind turbine gravity foundations based on sensor results obtained from the monitoring of an actual wind turbine foundation. To offer prediction of the evolutions, the formulation of a 3D Thermal-Hydro-Chemical (THC) model that is mainly derived from classical fundamental physical laws is also presented and discussed. The THC model can be mathematically fully coupled in Finite Element analyses. In the current study, COMSOL Multi-physics software was used to simulate the 3D THC coupling that occurred in the monitored wind turbine foundation to predict the temperature evolution at five different points within the foundation from time of casting.





References:
[1] H. F. W. Taylor, Cement Chemistry, 2 edition, Thomas Telford, London, 1997.
[2] L. Buffo-Lacarrière, A. Sellier, G. Escadeillas, A. Turatsinze, “Multiphasic finite element modeling of concrete hydration,” Cement and Concrete Research, Vol. 37, pp. 131–138, 2007.
[3] B., Kolani, L., Buffo-Lacarrière, A., Sellier, G., Escadeillas, L., Boutillon, L., Linger, “Hydration of slag-blended cements,” Cement & Concrete Composites, Vol. 34, pp. 1009–1018, 2012.
[4] G. De Schutter, L. Taerwe, “General hydration model for Portland cement and blast furnace slag cement,” Cement and Concrete Research, Vol. 25, pp. 593–604, 1995.
[5] F. J. Ulm, O. Coussy, “Modeling of thermo-chemo-mechanical couplings of concrete at early ages,” J. Eng. Mech. – ASCE Vol. 121, pp. 785–794, 1995.
[6] O. Coussy, “Poromechanics, ” John Wiley & Sons, Ltd, Chichester, UK, 2005.
[7] ACI Committee No. 301-10, Specifications for Structural Concrete: An ACI Standard, American concrete Institute, 2010.
[8] M. Briffaut , F. Benboudjema , J. M. Torrenti & G. Nahas (2012), “Effects of early-age thermal behaviour on damage risks in massive concrete structures, ” European Journal of Environmental and Civil Engineering, Vol. 16, pp. 589-605.
[9] Z. P. Bazant, L. J. Najjar, Nonlinear water diffusion in nonsaturated concrete, Mater. Struct. 5 (1972) 3–20.
[10] M. Wyrzykowski, P. Lura, Effect of relative humidity decrease due to self-desiccation on the hydration kinetics of cement, Cem. Concr. Res. 85 (2016) 75–81.
[11] M. Collepardi, “A state-of-the-art review on delayed ettringite attack on concrete,” Cement & Concrete Composites, Vol.25, pp, 401–407, 2003.
[12] L. Lacarriere, et al, “Restrained shrinkage of massive reinforced concrete structures: results of the project CEOS.fr,” European Journal of Environmental and Civil Engineering, Taylor & Francis, Vol. 20, pp.785-808, 2016.
[13] J. Xin, G. Zhang, Y. Liu, Z. Wang, Z. Wu, “Effect of temperature history and restraint degree on cracking behavior of early-age concrete,” Construction and Building Materials, Vol. 192, pp. 381-390, 2018.
[14] M. Cervera, J. Oliver, T. Prato, “Thermo-chemo-mechanical model for concrete. I: Hydration and aging,” J. Eng. Mech. – ASCE Vol. 125, pp. 1018–1027, 1999.
[15] D. Gawin, F. Pesavento, B.A. Schrefler, “Hygro-thermo-chemo-mechanical modeling of concrete at early ages and beyond. Part I: hydration and hygro-thermal phenomena,” Int. J. Numer. Meth. Eng. Vol. 67, pp. 299–331, 2006.
[16] G. Di Luzio, G. Cusatis, “Hygro-thermo-chemical modeling of high performance concrete. I: Theory,” Cement and Concrete Composites, Vol. 31, pp. 301–308, 2009.
[17] COMSOL Multiphysics version 5.2a, COMSOL AB, Stockholm, Sweden, 2016.
[18] M. Y. Du, X. Y. Jin, H. L. Ye, et al., “A coupled hygro-thermal model of early-age concrete based on micro-pore structure evolution,” Construction and Building Material, Vol. 111, pp. 689–698, 2016.
[19] H. Zhao, K. Jiang, R. Yang, Y. Tange, J. Liu, “Experimental and theoretical analysis on coupled effect of hydration, temperature and humidity in early-age cement-based materials,” International Journal of Heat and Mass Transfer. Vol. 146, 2020.
[20] V. Baroghel-Bouny, M. Mainguy, T. Lassabatere, O. Coussy, “Characterization and identification of equilibrium and transfer moisture properties for ordinary and high performance cementitious materials,” Cement and Concrete Research, Vol. 29, pp. 1225–1238, 1999.
[21] K. Maekawa, T. Ishida, T. Kishi, “Multi-scale Modeling of Structural Concrete,” Taylor and Francis, 2009.
[22] W. Zhou, T. Q. Qi, X. H. Liu, et al., A hygro-thermo-chemical analysis of concrete at an early age and beyond under dry-wet conditions based on a fixed model, Int. J. Heat Mass Transf. 115 (2017) 488–499.