Design of Composite Risers for Minimum Weight

The use of composite materials in offshore engineering for deep sea oil production riser systems has drawn considerable interest due to the potential weight savings and improvement in durability. The design of composite risers consists of two stages: (1) local design based on critical local load cases, and (2) global analysis of the full length composite riser under global loads and assessment of critical locations. In the first stage, eight different material combinations were selected and their laminate configurations optimised under local load considerations. Stage two includes a final local stress analysis of the critical sections of the riser under the combined loads determined in the global analysis. This paper describes two design methodologies of the composite riser to provide minimum structural weight and shows that the use of off angle fibre orientations in addition to axial and hoop reinforcements offer substantial weight savings and ensure the structural capacity.

• Chunguang Wang
• Krishna Shankar
• Evgeny V. Morozov

• Composite Riser
• Composite Tubular
• Finite Element Modelling
• Global Design
• Local Design
• Offshore Engineering.

[1] Salama, M.M., et al. "Composite risers are ready for field applicationsstatus
oftechnology, field demonstration and life cycle economics." in
13th annual deep offshore technology conference, Brazil, 2001.
[2] Ochoa, O.O. and M.M. Salama, "Offshore composites: transition barriers
to an enabling technology," Compos. Sci. Technol.,vol. 65(15-16), pp.
2588-2596. 2005.
[3] Sparks, C.P., et al. "Mechanical testing of high-performance composite
tubes for TLP production risers." in Offshore Technology Conference,
Houston, Texas, 1988, pp. OTC 5797.
[4] Salama, M.M., D.B. Johnson, and J.R. Long, "Composite production
riser-testing and qualification," SPE Prod. Facil., pp. 170-177. 1998.
[5] Salama, M.M., et al. "The first offshore field installation for a composite
riser joint." in Offshore Technology Conference, Houston, Texas, 2002,
pp. OTC 14018.
[6] Smith, K.L. and M.E. Leveque, "Ultra-deepwater production systems
technical-progress report," 2003, ConocoPhillips Company: USA.
[7] Picard, D., et al. "Composite carbon thermoplastic tubes for deepwater
application." in Offshore Technology Conference, Houston, Texas, 2007,
pp. OTC 19111.
[8] Kong, Q. and F. Kong, "Applocation of fiber-wound composites on
offshore oil and gas industry," Fiber Compos.,vol. 4, pp. 24-27,39. 2008.
[9] ABS, "Guide for buliding and classing subsea riser systems," in Design
requirements and loads(2008), American Bureau of Shipping.
[10] Wang, C., K. Shankar, and E.V. Morozov, "Tailoring of composite
reinforcements for weight reduction of offshore production risers,"
AMM, vol.66-68, pp.1416-21. 2011.
[11] Sun, C.T. and S. Li, "Three-dimensional effective elastic constant for
thick laminates," J. Compos. Mater.,vol. 22, pp. 629-639. 1988.
[12] API, "Design, construction, operation and maintenance of offshore
hydrocarbon pipelines," 1999.
[13] Chakrabarti, S.K., Handbook Of Offshore Engineering. 1st ed. Vol. 1.
2005, Great Britain: Elsevier.
[14] KIM, W.K., "Composite Production Riser Assessment," PhD thesis,
MecEn, Texas A&M University, 2007.
[15] DNV, "Offshore standard (DNV-OS-C501) composite components,"
2009.