Combustion and Emissions Performance of Syngas Fuels Derived from Palm Kernel Shell and Polyethylene (PE) Waste via Catalytic Steam Gasification

Computational fluid dynamics analysis of the burning of syngas fuels derived from biomass and plastic solid waste mixture through gasification process is presented in this paper. The syngas fuel is burned in gas turbine can combustor. Gas turbine can combustor with swirl is designed to burn the fuel efficiently and reduce the emissions. The main objective is to test the impact of the alternative syngas fuel compositions and lower heating value on the combustion performance and emissions. The syngas fuel is produced by blending palm kernel shell (PKS) with polyethylene (PE) waste via catalytic steam gasification (fluidized bed reactor). High hydrogen content syngas fuel was obtained by mixing 30% PE waste with PKS. The syngas composition obtained through the gasification process is 76.2% H2, 8.53% CO, 4.39% CO2 and 10.90% CH4. The lower heating value of the syngas fuel is LHV = 15.98 MJ/m3. Three fuels were tested in this study natural gas (100%CH4), syngas fuel and pure hydrogen (100% H2). The power from the combustor was kept constant for all the fuels tested in this study. The effect of syngas fuel composition and lower heating value on the flame shape, gas temperature, mass of carbon dioxide (CO2) and nitrogen oxides (NOX) per unit of energy generation is presented in this paper. The results show an increase of the peak flame temperature and NO mass fractions for the syngas and hydrogen fuels compared to natural gas fuel combustion. Lower average CO2 emissions at the exit of the combustor are obtained for the syngas compared to the natural gas fuel.

Authors:

• Chaouki Ghenai

Keywords:

• CFD
• Combustion
• Emissions
• Gas Turbine Combustor
• Gasification
• Solid Waste
• Syngas and Waste to Energy.

References:

[1] Giles, D., E., Som, S., and Aggarwal, S. K., NOx emission
characteristics of counterflow syngas diffusion flames with airstream
dilution, Fuel, volume 85, Issues 12-13, 2006
[2] Ghenai, Combustion of syngas fuel in gas turbine can combustor,
Advances in Mechanical Engineering, Volume 2010, Article ID 342357,
13 pages, 2010.
[3] Alavandi, S. K., Agarwal, A. K., Experimental study of combustion of
hydrogen–syngas/methane fuel mixtures in a porous burner,
International Journal of Hydrogen Energy, Volume 33, Issue 4, pp.
1407, 2008
[4] Oluyede, E.O., Fundamental impact of firing syngas in gas turbines, Gas
Turbine Industrial Fellowship Program, Project Report, Electric Power
Research Institute, Charlotte, 2006
[5] Rahm, S., Goldmeer, J., Moilere, M., Eranki, A., Addressing gas turbine
fuel flexibility, Power-Gen Middle East conference in Manama, Bahrain
on February 17–19, 2009.
[6] Brdar R.D., and Jones R. M., GE IGCC Technology and Experience
with Advanced gas turbines, GE Power Systems, GER-4207, 2000
[7] P. Cheng, Two-Dimensional Radiating Gas Flow by a Moment Method.
AIAA Journal, 2:1662-1664, 1964.
[8] R. Siegel and J. R. Howell, Thermal Radiation Heat Transfer.
Hemisphere Publishing Corporation, Washington DC, 1992.
[9] Hrabovsky, M., Plasma aided gasification of biomass, organic waste and
plastics, 30th OCPIG, August 28th – September 2nd, 2011, Belfast,
Northern Ireland, UK.
[10] R.A. Moghadam, S. Yuup, H.L. Lam, A. Al Shoibi, and M. M. Ahmad,
Hydrogen production from mixture of biomass and polyethylene waste
in fluidized bed catalytic steam co-gasification process, Chemical
Engineering Transactions, Vol. 35, 2013.