Analysis of Capillary Coating Die Flow in an Optical Fiber Coating Applicator

Viscous heating becomes significant in the high speed resin coating process of glass fibers for optical fiber manufacturing. This study focuses on the coating resin flows inside the capillary coating die of optical fiber coating applicator and they are numerically simulated to examine the effects of viscous heating and subsequent temperature increase in coating resin. Resin flows are driven by fast moving glass fiber and the pressurization at the coating die inlet, while the temperature dependent viscosity of liquid coating resin plays an important role in the resin flow. It is found that the severe viscous heating near the coating die wall profoundly alters the radial velocity profiles and that the increase of final coating thickness by die pressurization is amplified if viscous heating is present.

Authors:

• Kyoungjin Kim

Keywords:

• Optical fiber manufacturing
• Optical fiber coating
• Capillary flow
• Viscous heating
• Flow simulation

References:

[1] M. Makinen, "A test facility for enhanced fiber drawing process
development," in Communications Cabling, A. L. Harmer, Ed. IOP
Press, 1997, pp. 65-71.
[2] K. Kim, H. S. Kwak, S. H. Park, and Y. S. Lee, "Theoretical prediction on
double-layer coating in wet-on-wet optical fiber coating process," J. Coat.
Technol. Res., vol. 8, no. 1, pp. 35-44, 2011.
[3] S. R. Schmid and A. F. Toussaint, "Optical fiber coatings," in Specialty
Optical Fiber Handbook, A. Mendez and T. Morse, Ed. Academic Press,
2007, pp. 95-122.
[4] U. C. Paek and C. M. Schroeder, "High speed coating of optical fibers
with UV curable materials at a rate of greater than 5 m/sec," Appl. Opt.,
vol. 20, no. 23, pp. 4028-4043, 1981.
[5] A. Panoliaskos, W. L. H. Hallett, and I. Garis, "Prediction of optical fiber
coating thickness," Appl. Opt., vol. 24, no. 15, pp. 2309-2312, 1985.
[6] N. Orita, P. Hasloev, and F. Pedersen, "Optical fiber manufacturing
method and optical fiber manufacturing apparatus," U.S. Patent Pub. No.
US2009/0145168, 2009.
[7] P. G. Simpkins and V. J. Kuck, "On air entrainment in coatings," J.
Colloid Interface Sci., vol. 263, no. 2, pp. 562-571, 2003.
[8] K. Kim, H. S. Kwak, and J. S. Choi, "A computational investigation of
thermal effects on resin coating flows in an optical fiber drawing system,"
in Proc. 2nd International Conference on Mechanical, Industrial, and
Manufacturing Technologies, Singapore, 2011, vol. 2, pp. 510-514.
[9] S. Sakaguchi and T. Kimura, "High-speed drawing of optical fibers with
pressurized coating." J. Lightwave Technol., vol. LT-3, no. 3, pp.
669-673, 1985.
[10] A. Yang, X. M. Tao, and X. Y. Cheng, "Prediction of fiber coating via
liquid-phase process." J. Mater. Process. Technol., vol. 202, no. 1-3, pp.
365-373, 2008.
[11] K. Ratten and Y. Jaluria, "Simulation of the flow in a coating applicator
for optical fiber manufacture," Comput. Mech., vol. 31, no. 5, pp.
428-436, 2003.
[12] S.-Y. Yoo and Y. Jaluria, "Isothermal flow in an optical fiber coating
applicator and die system," J. Lightwave Technol., vol. 24, no. 1, pp.
449-463, 2006.
[13] S.-Y. Yoo and Y. Jaluria, "Fluid flow and heat transfer in an optical fiber
coating process," Int. J. Heat Mass Transfer, vol. 50, no. 5-6, pp.
1176-1185, 2007.