Abstract: In this paper a new method for increasing the speed of
SAGCM-APD is proposed. Utilizing carrier rate equations in
different regions of the structure, a circuit model for the structure is
obtained. In this research, in addition to frequency response, the
effect of added new charge layer on some transient parameters like
slew-rate, rising and falling times have been considered. Finally, by
trading-off among some physical parameters such as different layers
widths and droppings, a noticeable decrease in breakdown voltage
has been achieved. The results of simulation, illustrate some features
of proposed structure improvement in comparison with conventional
SAGCM-APD structures.
Abstract: This paper proposes a method of adaptively generating a gait pattern of biped robot. The gait synthesis is based on human's gait pattern analysis. The proposed method can easily be applied to generate the natural and stable gait pattern of any biped robot. To analyze the human's gait pattern, sequential images of the human's gait on the sagittal plane are acquired from which the gait control values are extracted. The gait pattern of biped robot on the sagittal plane is adaptively generated by a genetic algorithm using the human's gait control values. However, gait trajectories of the biped robot on the sagittal plane are not enough to construct the complete gait pattern because the biped robot moves on 3-dimension space. Therefore, the gait pattern on the frontal plane, generated from Zero Moment Point (ZMP), is added to the gait one acquired on the sagittal plane. Consequently, the natural and stable walking pattern for the biped robot is obtained.
Abstract: Underpricing is one anomaly in initial public offerings
(IPO) literature that has been widely observed across different stock
markets with different trends emerging over different time periods.
This study seeks to determine how IPOs on the JSE performed on the
first day, first week and first month over the period of 1996-2011.
Underpricing trends are documented for both hot and cold market
periods in terms of four main sectors (cyclical, defensive, growth
stock and interest rate sensitive stocks). Using a sample of 360 listed
companies on the JSE, the empirical findings established that IPOs
on the JSE are significantly underpriced with an average market
adjusted first day return of 62.9%. It is also established that hot
market IPOs on the JSE are more underpriced than the cold market
IPOs. Also observed is the fact that as the offer price per share
increases above the median price for any given period, the level of
underpricing decreases substantially. While significant differences
exist in the level of underpricing of IPOs in the four different sectors
in the hot and cold market periods, interest rates sensitive stocks
showed a different trend from the other sectors and thus require
further investigation to uncover this pattern.
Abstract: Laboratory activities have produced benefits in
student learning. With current drives of new technology resources
and evolving era of education methods, renewal status of learning
and teaching in laboratory methods are in progress, for both learners
and the educators. To enhance learning outcomes in laboratory works
particularly in engineering practices and testing, learning via handson
by instruction may not sufficient. This paper describes and
compares techniques and implementation of traditional (expository)
with open-ended laboratory (problem-based) for two consecutive
cohorts studying environmental laboratory course in civil engineering
program. The transition of traditional to problem-based findings and
effect were investigated in terms of course assessment student
feedback survey, course outcome learning measurement and student
performance grades. It was proved that students have demonstrated
better performance in their grades and 12% increase in the course
outcome (CO) in problem-based open-ended laboratory style than
traditional method; although in perception, students has responded
less favorable in their feedback.
Abstract: Seismic qualification testing for equipments to be
mounted on upper storeys of buildings is very demanding in terms of
floor spectra. The latter is characterized by high accelerations
amplitudes within a narrow frequency band. This article presents a
method which permits to cover specified required response spectra
beyond the shaking table capability by amplifying the acceleration
amplitudes at an appropriate frequency range using a physical
intermediate mounted on the platform of the shaker.
Abstract: Weather disaster events were frequent and caused loss
of lives and property in Taiwan recently. Excessive concentration of
population and lacking of integrated planning led to Taiwanese coastal
zone face the impacts of climate change directly. Comparing to many
countries which have already set up legislation, competent authorities
and national adaptation strategies, the ability of coastal management
adapting to climate change is still insufficient in Taiwan. Therefore, it
is necessary to establish a complete institutional arrangement for
coastal management due to climate change in order to protect
environment and sustain socio-economic development. This paper
firstly reviews the impact of climate change on Taiwanese coastal
zone. Secondly, development of Taiwanese institutional arrangement
of coastal management is introduced. Followed is the analysis of four
dimensions of legal basis, competent authority, scientific and financial
support and international cooperations of institutional arrangement.
The results show that Taiwanese government shall: 1) integrate climate
change issue into Coastal Act, Wetland Act and territorial planning
Act and pass them; 2) establish the high level competent authority for
coastal management; 3) set up the climate change disaster coordinate
platform; 4) link scientific information and decision markers; 5)
establish the climate change adjustment fund; 6) participate in
international climate change organizations and meetings actively; 7)
cooperate with near countries to exchange experiences.
Abstract: Wireless sensor networks (WSN) are currently
receiving significant attention due to their unlimited potential. These
networks are used for various applications, such as habitat
monitoring, automation, agriculture, and security. The efficient nodeenergy
utilization is one of important performance factors in wireless
sensor networks because sensor nodes operate with limited battery
power. In this paper, we proposed the MiSense hierarchical cluster
based routing algorithm (MiCRA) to extend the lifetime of sensor
networks and to maintain a balanced energy consumption of nodes.
MiCRA is an extension of the HEED algorithm with two levels of
cluster heads. The performance of the proposed protocol has been
examined and evaluated through a simulation study. The simulation
results clearly show that MiCRA has a better performance in terms of
lifetime than HEED. Indeed, MiCRA our proposed protocol can
effectively extend the network lifetime without other critical
overheads and performance degradation. It has been noted that there
is about 35% of energy saving for MiCRA during the clustering
process and 65% energy savings during the routing process compared
to the HEED algorithm.
Abstract: Synthesis gas manufacturing by steam reforming of hydrocarbons is an important industrial process. High endothermic nature of the process makes it one of the most cost and heat intensive processes. In the present work, composite effect of different inert gases on synthesis gas yield, feed gas conversion and temperature distribution along the reactor length has been studied using a heterogeneous model. Mathematical model was developed as a first stage and validated against the existing process models. With the addition of inert gases, a higher yield of synthesis gas is observed. Simultaneously the rector outlet temperature drops to as low as 810 K. It was found that Xenon gives the highest yield and conversion while Helium gives the lowest temperature. Using Xenon inert gas 20 percent reduction in outlet temperature was observed compared to traditional case.
Abstract: This study applied Theory of Planned Behaviour
(TPB) to explain the knowledge sharing behaviour among academic
staff at a Public Higher Education Institution (HEI) in Malaysia. The
main objectives of this study are; to identify the components that
influence knowledge sharing behaviour and to determine the levels of
knowledge sharing behaviour among academic staff. A total of 200
respondents were participated in answering questionnaires. The
findings of this study revealed that level of perceiving and
implementing knowledge sharing behaviour among academic staff at
a Public HEI in Malaysia exist but not openly or strongly practiced.
The findings were discussed and recommendations for the future
research were also addressed.
Abstract: This paper presents the significant factor and give
some suggestion that should know before design. The main objective of this paper is guide the first step for someone who attends to design of grounding system before study in details later. The overview of
grounding system can protect damage from fault such as can save a human life and power system equipment. The unsafe conditions have
three cases. Case 1) maximum touch voltage exceeds the safety
criteria. In this case, the conductor compression ratio of the ground gird should be first adjusted to have optimal spacing of ground grid
conductors. If it still over limit, earth resistivity should be consider afterward. Case 2) maximum step voltage exceeds the safety criteria.
In this case, increasing the number of ground grid conductors around
the boundary can solve this problem. Case 3) both of maximum touch
and step voltage exceed the safety criteria. In this case, follow the solutions explained in case 1 and case 2. Another suggestion, vary depth of ground grid until maximum step and touch voltage do not
exceed the safety criteria.
Abstract: The drainage Estimating is an important factor in
dam management. In this paper, we use fuzzy support vector
regression (FSVR) to predict the drainage of the Sirikrit Dam at
Uttaradit province, Thailand. The results show that the FSVR is a
suitable method in drainage estimating.
Abstract: The objective of the present study was to evaluate the
potential of hollow microneedles for enhancing the transdermal
delivery of Bovine Serum Albumin (MW~66,000 Da)-Fluorescein
Isothiocyanate (BSA-FITC) conjugate, a hydrophilic large molecular
compound. Moreover, the effect of different formulations was
evaluated. The series of binary mixtures composed of propylene
glycol (PG) and pH 7.4 phosphate buffer solution (PBS) was
prepared and used as a medium for BSA-FITC. The results showed
that there was no permeation of BSA-FITC solution across the
neonatal porcine skin without using hollow microneedles, whereas
the cumulative amount of BSA-FITC released at 8 h through the
neonatal porcine skin was about 60-70% when using hollow
microneedles. Furthermore, the results demonstrated that the higher
volume of PG in binary mixtures injected, the lower cumulative
amount of BSA-FITC released and release rate of BSA-FITC from
skin. These release profiles of BSA-FITC in binary mixtures were
expressed by Fick-s law of diffusion. These results suggest the
utilization of hollow microneedle to enhance transdermal delivery of
protein and provide useful information for designing an effective
hollow microneedle system.
Abstract: Supply chain networks are frequently hit by
unplanned events which lead to disruptions and cause operational and
financial consequences. It is neither possible to avoid disruption risk
entirely, nor are network members able to prepare for every possible
disruptive event. Therefore a continuity planning should be set up
which supports effective operational responses in supply chain
networks in times of emergencies. In this research network related
degrees of freedom which determine the options for responsive
actions are derived from interview data. The findings are further
embedded into a common risk management process. The paper
provides support for researchers and practitioners to identify the
network related options for responsive actions and to determine the
need for improving the reaction capabilities.
Abstract: This paper presents the experimental results of silicone rubber polymer insulators for 22 kV systems under salt water dip wheel test based on IEC 62217. Straight shed silicone rubber polymer insulators having leakage distance 685 mm were tested continuously 30,000 cycles. One test cycle includes 4 positions, energized, de-energized, salt water dip and deenergized, respectively. For one test cycle, each test specimen remains stationary for about 40 second in each position and takes 8 second for rotate to next position. By visual observation, sever surface erosion was observed on the trunk near the energized end of tested specimen. Puncture was observed on the upper shed near the energized end. In addition, decreasing in hydrophobicity and increasing in hardness were measured on tested specimen comparing with new specimen. Furthermore, chemical analysis by ATR-FTIR was conducted in order to elucidate the chemical change of tested specimens comparing with new specimen.
Abstract: A new concept for long-term reagent storage for Labon- a-Chip (LoC) devices is described. Here we present a polymer multilayer stack with integrated stick packs for long-term storage of several liquid reagents, which are necessary for many diagnostic applications. Stick packs are widely used in packaging industry for storing solids and liquids for long time. The storage concept fulfills two main requirements: First, a long-term storage of reagents in stick packs without significant losses and interaction with surroundings, second, on demand releasing of liquids, which is realized by pushing a membrane against the stick pack through pneumatic pressure. This concept enables long-term on-chip storage of liquid reagents at room temperature and allows an easy implementation in different LoC devices.
Abstract: If price and quantity are the fundamental building
blocks of any theory of market interactions, the importance of trading
volume in understanding the behavior of financial markets is clear.
However, while many economic models of financial markets have
been developed to explain the behavior of prices -predictability,
variability, and information content- far less attention has been
devoted to explaining the behavior of trading volume. In this article,
we hope to expand our understanding of trading volume by
developing a new measure of herding behavior based on a cross
sectional dispersion of volumes betas. We apply our measure to the
Toronto stock exchange using monthly data from January 2000 to
December 2002. Our findings show that the herd phenomenon
consists of three essential components: stationary herding, intentional
herding and the feedback herding.
Abstract: Artifact rejection plays a key role in many signal processing applications. The artifacts are disturbance that can occur during the signal acquisition and that can alter the analysis of the signals themselves. Our aim is to automatically remove the artifacts, in particular from the Electroencephalographic (EEG) recordings. A technique for the automatic artifact rejection, based on the Independent Component Analysis (ICA) for the artifact extraction and on some high order statistics such as kurtosis and Shannon-s entropy, was proposed some years ago in literature. In this paper we try to enhance this technique proposing a new method based on the Renyi-s entropy. The performance of our method was tested and compared to the performance of the method in literature and the former proved to outperform the latter.
Abstract: Using data of listed Croatian firms from the Zagreb
Stock Exchange we analyze the relationship between firm ownership
(ownership concentration and type) and performance (ROA).
Empirical research was conducted for the period 2003-2010, yielding
with the total of 1,430 observations. Empirical findings based on
dynamic panel analysis indicate that ownership concentration
variable - CR4 is negatively related with performance, i.e. listed firms
with dispersed ownership perform better than firms with concentrated
ownership. Also, the research indicated that foreign controlled listed
firms perform better than domestically controlled firms. Majority
state owned firms perform worse than privately held firms but
dummy variable for privately controlled firms was not statistically
significant in the estimated panel model.
Abstract: The cinema in Turkey during the 1940s was shaped
under the Second World War conditions. The amateur film makers
from different socioeconomic roots experienced movie production in
those years. Having similar socioeconomic characteristics and
autobiographies, each of them has a different understanding of
cinema. Nevertheless, they joined in making movies which address
native culture and audience. They narrated indigenous stories with
native music, amateur players and simple settings. Although the
martial law, censorship and economical deficiencies, they started to
produce films in the Second World War. The cinematographers of the
1940s usually called as thetransition period cinematographers in
Turkey, producing in the passage between the period of thetheatre
playersand the period of thenational cinema. But, 1940- 1950 period
of Turkish cinema should be defined not as a transition but a period
of forming the professional conscioussness in cinema.
Abstract: Multifunctional structures are a potentially disruptive
technology that allows for significant mass savings on spacecraft.
The specific concept addressed herein is that of a multifunctional
power structure. In this paper, a parametric optimisation of the
design of such a structure that uses commercially available battery
cells is presented. Using numerical modelling, it was found that there
exists several trade-offs aboutthe conflict between the capacity of the
panel and its mechanical properties. It was found that there is no
universal optimal location for the cells. Placing them close to the
mechanical interfaces increases loading in the mechanically weak
cells whereas placing them at the centre of the panel increases the
stress inthe panel and reduces the stiffness of the structure.