Abstract: The paper presents an investigation in to the effect of neural network predictive control of UPFC on the transient stability performance of a multimachine power system. The proposed controller consists of a neural network model of the test system. This model is used to predict the future control inputs using the damped Gauss-Newton method which employs ‘backtracking’ as the line search method for step selection. The benchmark 2 area, 4 machine system that mimics the behavior of large power systems is taken as the test system for the study and is subjected to three phase short circuit faults at different locations over a wide range of operating conditions. The simulation results clearly establish the robustness of the proposed controller to the fault location, an increase in the critical clearing time for the circuit breakers, and an improved damping of the power oscillations as compared to the conventional PI controller.
Abstract: The curriculum of the primary school science course was redesigned on the basis of constructivism in 2005-2006 academic years, in Turkey. In this context, the name of this course has been changed as “Science and Technology"; and both content and course books, students workbooks for this course have been redesigned in light of constructivism. The aim of this study is to determine whether the Science and Technology course books and student work books for primary school 5th grade are appropriate for the constructivism by evaluating them in terms of the fundamental principles of constructivism. In this study, out of qualitative research methods, documentation technique (i.e. document analysis) is applied; while selecting samples, criterion-sampling is used out of purposeful sampling techniques. When the Science and Technology course book and workbook for the 5th grade in primary education are examined, it is seen that both books complete each other in certain areas. Consequently, it can be claimed that in spite of some inadequate and missing points in the course book and workbook of the primary school Science and Technology course for the 5th grade students, these books are attempted to be designed in terms of the principles of constructivism. To overcome the inadequacies in the books, it can be suggested to redesign them. In addition to them, not to ignore the technology dimension of the course, the activities that encourage the students to prepare projects using technology cycle should be included.
Abstract: Laser beam forming is a novel technique developed for the joining of metallic components. In this study, an overview of the laser beam forming process, areas of application, the basic mechanisms of the laser beam forming process, some recent research
studies and the need to focus more research effort on improving the
laser-material interaction of laser beam forming of titanium and its
alloys are presented.
Abstract: This work will provide a new perspective of exploring innovation thematic. It will reveal that radical and incremental innovations are complementary during the innovation life cycle and accomplished through distinct ways of developing new products. Each new product development process will be constructed according to the nature of each innovation and the state of the product development. This paper proposes the inclusion of the organizational function areas that influence new product's development on the new product development process.
Abstract: The objective of the research was to study of foot
anthropometry of children aged 7-12 years in the South of Thailand Thirty-three dimensions were measured on 305 male and 295 female
subjects with 3 age ranges (7-12 years old). The instrumentation consists of four types of anthropometer, digital vernier caliper, digital
height gauge and measuring tape. The mean values and standard
deviations of average age, height, and weight of the male subjects were 9.52(±1.70) years, 137.80(±11.55) cm, and 37.57(±11.65) kg.
Female average age, height, and weight subjects were 9.53(±1.70) years, 137.88(±11.55) cm, and 34.90(±11.57) kg respectively. The
comparison of the 33 comparison measured anthropometric. Between
male and female subjects were sexual differences in size on women in almost all areas of significance (p
Abstract: This report aims to utilize existing and future Multiple-Input Multiple-Output Orthogonal Frequency Division Multiplexing Wireless Local Area Network (MIMO-OFDM WLAN) systems characteristics–such as multiple subcarriers, multiple antennas, and channel estimation characteristics–for indoor location estimation systems based on the Direction of Arrival (DOA) and Radio Signal Strength Indication (RSSI) methods. Hybrid of DOA-RSSI methods also evaluated. In the experimental data result, we show that location estimation accuracy performances can be increased by minimizing the multipath fading effect. This is done using multiple subcarrier frequencies over wideband frequencies to estimate one location. The proposed methods are analyzed in both a wide indoor environment and a typical room-sized office. In the experiments, WLAN terminal locations are estimated by measuring multiple subcarriers from arrays of three dipole antennas of access points (AP). This research demonstrates highly accurate, robust and hardware-free add-on software for indoor location estimations based on a MIMO-OFDM WLAN system.
Abstract: This paper deals principally with the socio-economic impact on the local Iban community in Mukah Division, Sarawak; with the commencement of the open-cut coal mining industry since 2003. To-date there are no actual studies being carried out by either the public or private sector to truly analyze how the Iban community is coping with the advent of a large influx of cash into their society. The Iban community has traditionally been practicing shifting cultivation and farming of domesticated animals; with a portion of the younger generation working as laborers and professional. This paper represents the views and observations of the author supported by some statistical facts extracted from published articles and non-published reports. The paper deals primarily in the following areas: • Background of the coal mining industry in Mukah Division, Sarawak; • Benefits of the coal mining industry towards the Iban community; • Issues / Problems arise in the Iban community because of the presence of the coal mining industry; and • Possible actions that need to be taken to overcome these issues/ problems.
Abstract: The scale, complexity and worldwide geographical
spread of the LHC computing and data analysis problems are
unprecedented in scientific research. The complexity of processing
and accessing this data is increased substantially by the size and
global span of the major experiments, combined with the limited
wide area network bandwidth available. We present the latest
generation of the MONARC (MOdels of Networked Analysis at
Regional Centers) simulation framework, as a design and modeling
tool for large scale distributed systems applied to HEP experiments.
We present simulation experiments designed to evaluate the
capabilities of the current real-world distributed infrastructure to
support existing physics analysis processes and the means by which
the experiments bands together to meet the technical challenges
posed by the storage, access and computing requirements of LHC
data analysis within the CMS experiment.
Abstract: Academia-industry relationship is not like that of
technology donator-acceptor, but is of interactive and collaborative
nature, acknowledging and ensuring mutual respect for each other-s
role and contributions with an eye to attaining the true purpose of
such relationships, namely, bringing about research-outcome
synergy. Indeed, academia-industry interactions are a system that
requires active and collaborative participations of all the
stakeholders.
This paper examines various issues associated with academic
institutions and industry collaboration with special attention to the
nature of resources and potentialities of stakeholders in the context of
knowledge management. This paper also explores the barriers of
academia-industry interaction. It identifies potential areas where
industry-s participation with academia would be most effective for
synergism. Lastly, this paper proposes an integrated model of several
new collaborative approaches that are possible, mainly in the Indian
scenario to strengthen academia-industry interface.
Abstract: Spare parts inventory management is one of the major
areas of inventory research. Analysis of recent literature showed that
an approach integrating spare parts classification, demand
forecasting, and stock control policies is essential; however, adapting
this integrated approach is limited. This work presents an integrated
framework for spare part inventory management and an Excel based
application developed for the implementation of the proposed
framework. A multi-criteria analysis has been used for spare
classification. Forecasting of spare parts- intermittent demand has
been incorporated into the application using three different
forecasting models; namely, normal distribution, exponential
smoothing, and Croston method. The application is also capable of
running with different inventory control policies. To illustrate the
performance of the proposed framework and the developed
application; the framework is applied to different items at a service
organization. The results achieved are presented and possible areas
for future work are highlighted.
Abstract: Food safety is an important concern for holiday
makers in foreign and unfamiliar tourist destinations. In fact, risk
from food in these tourist destinations has an influence on tourist
perception. This risk can potentially affect physical health and lead to
an inability to pursue planned activities. The objective of this paper
was to compare foreign tourists- demographics including gender, age
and education level, with the level of perceived risk towards food
safety. A total of 222 foreign tourists during their stay at Khao San
Road in Bangkok were used as the sample. Independent- samples ttest,
analysis of variance, and Least Significant Difference or LSD
post hoc test were utilized. The findings revealed that there were few
demographic differences in level of perceived risk among the foreign
tourists. The post hoc test indicated a significant difference among
the old and the young tourists, and between the higher and lower
level of education. Ranks of tourists- perceived risk towards food
safety unveiled some interesting results. Tourists- perceived risk of
food safety in established restaurants can be ranked as i) cleanliness
of dining utensils, ii) sanitation of food preparation area, and iii)
cleanliness of food seasoning and ingredients. Whereas, the tourists-
perceived risk of food safety in street food and drink can be ranked
as i) cleanliness of stalls and pushcarts, ii) cleanliness of food sold,
and iii) personal hygiene of street food hawkers or vendors.
Abstract: Innovation is being view from four areas of
innovation, product, service, technology, and marketing. Whereas
customer loyalty is composed of customer expectation, perceived
quality, perceived value, corporate image, customer satisfaction,
customer trust/confidence, customer commitment, customer
complaint, and customer loyalty. This study aimed to investigate the
influence of innovation factors to customer loyalty to GSM in the
telecom companies where use of products and services. Structural
Equation Modeling (SEM) using to analyze innovation factors. It was
found the factor of innovation have significant influence on customer
loyalty.
Abstract: The two-phase flow field and the motion of the free
surface in an oscillating channel are simulated numerically to assess
the methodology for simulating nuclear reacotr thermal hydraulics
under seismic conditions. Two numerical methods are compared: one
is to model the oscillating channel directly using the moving grid of
the Arbitrary Lagrangian-Eulerian method, and the other is to simulate
the effect of channel motion using the oscillating acceleration acting
on the fluid in the stationary channel. The two-phase flow field in the
oscillating channel is simulated using the level set method in both
cases. The calculated results using the oscillating acceleration are
found to coinside with those using the moving grid, and the theoretical
back ground and the limitation of oscillating acceleration are discussed.
It is shown that the change in the interfacial area between liquid and
gas phases under seismic conditions is important for nuclear reactor
thermal hydraulics.
Abstract: Rapid advancement in computing technology brings
computers and humans to be seamlessly integrated in future. The
emergence of smartphone has driven computing era towards
ubiquitous and pervasive computing. Recognizing human activity has
garnered a lot of interest and has raised significant researches-
concerns in identifying contextual information useful to human
activity recognition. Not only unobtrusive to users in daily life,
smartphone has embedded built-in sensors that capable to sense
contextual information of its users supported with wide range
capability of network connections. In this paper, we will discuss the
classification algorithms used in smartphone-based human activity.
Existing technologies pertaining to smartphone-based researches in
human activity recognition will be highlighted and discussed. Our
paper will also present our findings and opinions to formulate
improvement ideas in current researches- trends. Understanding
research trends will enable researchers to have clearer research
direction and common vision on latest smartphone-based human
activity recognition area.
Abstract: This study examines perception of environmental
approach in small and medium-sized enterprises (SMEs) – the
process by which firms integrate environmental concern into
business. Based on a review of the literature, the paper synthesizes
focus on environmental issues with the reflection in a case study in
the Czech Republic. Two themes of corporate environmentalism are
discussed – corporate environmental orientation and corporate
stances toward environmental concerns. It provides theoretical
material on greening organizational culture that is helpful in
understanding the response of contemporary business to
environmental problems. We integrate theoretical predictions with
empirical findings confronted with reality. Scales to measure these
themes are tested in a survey of managers in 229 Czech firms. We
used the process of in-depth questioning. The research question was
derived and answered in the context of the corresponding literature
and conducted research. A case study showed us that environmental
approach is variety different (depending on the size of the firm) in
SMEs sector. The results of the empirical mapping demonstrate
Czech company’s approach to environment and define the problem
areas and pinpoint the main limitation in the expansion of
environmental aspects. We contribute to the debate for recognition of
the particular role of environmental issues in business reality.
Abstract: This paper presents a NDT by infrared thermography with excitation CO2 Laser, wavelength of 10.6 μm. This excitation is the controllable heating beam, confirmed by a preliminary test on a wooden plate 1.2 m x 0.9 m x 1 cm. As the first practice, this method is applied to detecting the defect in CFRP heated by the Laser 300 W during 40 s. Two samples 40 cm x 40 cm x 4.5 cm are prepared, one with defect, another one without defect. The laser beam passes through the lens of a deviation device, and heats the samples placed at a determinate position and area. As a result, the absence of adhesive can be detected. This method displays prominently its application as NDT with the composite materials. This work gives a good perspective to characterize the laser beam, which is very useful for the next detection campaigns.
Abstract: During the last couple of years, the degree of dependence on IT systems has reached a dimension nobody imagined to be possible 10 years ago. The increased usage of mobile devices (e.g., smart phones), wireless sensor networks and embedded devices (Internet of Things) are only some examples of the dependency of modern societies on cyber space. At the same time, the complexity of IT applications, e.g., because of the increasing use of cloud computing, is rising continuously. Along with this, the threats to IT security have increased both quantitatively and qualitatively, as recent examples like STUXNET or the supposed cyber attack on Illinois water system are proofing impressively. Once isolated control systems are nowadays often publicly available - a fact that has never been intended by the developers. Threats to IT systems don’t care about areas of responsibility. Especially with regard to Cyber Warfare, IT threats are no longer limited to company or industry boundaries, administrative jurisdictions or state boundaries. One of the important countermeasures is increased cooperation among the participants especially in the field of Cyber Defence. Besides political and legal challenges, there are technical ones as well. A better, at least partially automated exchange of information is essential to (i) enable sophisticated situational awareness and to (ii) counter the attacker in a coordinated way. Therefore, this publication performs an evaluation of state of the art Intrusion Detection Message Exchange protocols in order to guarantee a secure information exchange between different entities.
Abstract: The use of radar in Quantitative Precipitation Estimation (QPE) for radar-rainfall measurement is significantly beneficial. Radar has advantages in terms of high spatial and temporal condition in rainfall measurement and also forecasting. In Malaysia, radar application in QPE is still new and needs to be explored. This paper focuses on the Z/R derivation works of radarrainfall estimation based on rainfall classification. The works developed new Z/R relationships for Klang River Basin in Selangor area for three different general classes of rain events, namely low (10mm/hr, 30mm/hr) and also on more specific rain types during monsoon seasons. Looking at the high potential of Doppler radar in QPE, the newly formulated Z/R equations will be useful in improving the measurement of rainfall for any hydrological application, especially for flood forecasting.
Abstract: In this research, CaO-ZnO catalysts (with various
Ca:Zn atomic ratios of 1:5, 1:3, 1:1, and 3:1) prepared by incipientwetness
impregnation (IWI) and co-precipitation (CP) methods were
used as a catalyst in the transesterification of palm oil with methanol
for biodiesel production. The catalysts were characterized by several
techniques, including BET method, CO2-TPD, and Hemmett
Indicator. The effects of precursor concentration, and calcination
temperature on the catalytic performance were studied under reaction
conditions of a 15:1 methanol to oil molar ratio, 6 wt% catalyst,
reaction temperature of 60°C, and reaction time of 8 h. At Ca:Zn
atomic ratio of 1:3 gave the highest FAME value owing to a basic
properties and surface area of the prepared catalyst.
Abstract: In this paper, we analyzed the pattern of urban spatial structure of Siheung City that had been divided into two parts and presented alternative plans in order to get rid of these phenomena. Concerning patterns of urban spatial structure, we examined it through means of analyzing status of land use, population density and distribution of residence, status of distribution of main facilities, medical facilities, status of distribution of cultural facilities, distribution of land prices and traffic volume trends. The results of study revealed that status of facilities distribution and distribution of land prices, etc. were bisected by the surrounding area of former municipal office and the district of Sihwa, which were both regarded as one apex of the city divide, forming a duo-centric city. In order to get rid of this problem concerned with urban spatial structure that has been bisected, it is required that measures in order to expand facilities in Siheung City should be taken.