Abstract: Software-as-a-Service (SaaS) is a form of cloud
computing that relieves the user of the burden of hardware and
software installation and management. SaaS can be used at the course
level to enhance curricula and student experience. When cloud
computing and SaaS are included in educational literature, the focus
is typically on implementing administrative functions. Yet, SaaS can
make more immediate and substantial contributions to the technical
course content in educational offerings. This paper explores cloud
computing and SaaS, provides examples, reports on experiences
using SaaS to offer specialized software in courses, and analyzes the
advantages and disadvantages of using SaaS at the course level. The
paper contributes to the literature in higher education by analyzing
the major technical concepts, potential, and constraints for using
SaaS to deliver specialized software at the course level. Further it
may enable more educators and students to benefit from this
emerging technology.
Abstract: We propose a method for discrimination and
classification of ovarian with benign, malignant and normal tissue
using independent component analysis and neural networks. The
method was tested for a proteomic patters set from A database, and
radial basis functions neural networks. The best performance was
obtained with probabilistic neural networks, resulting I 99% success
rate, with 98% of specificity e 100% of sensitivity.
Abstract: The environmental impact caused by industries is an issue that, in the last 20 years, has become very important in terms of society, economics and politics in Colombia. Particularly, the tannery process is extremely polluting because of uneffective treatments and regulations given to the dumping process and atmospheric emissions. Considering that, this investigation is intended to propose a management model based on the integration of Lean Supply Chain, Green Supply Chain, Cleaner Production and ISO 14001-2004, that prioritizes the strategic components of the organizations. As a result, a management model will be obtained and it will provide a strategic perspective through a systemic approach to the tanning process. This will be achieved through the use of Multicriteria Decision tools, along with Quality Function Deployment and Fuzzy Logic. The strategic approach that embraces the management model using the alignment of Lean Supply Chain, Green Supply Chain, Cleaner Production and ISO 14001-2004, is an integrated perspective that allows a gradual frame of the tactical and operative elements through the correct setting of the information flow, improving the decision making process. In that way, Small Medium Enterprises (SMEs) could improve their productivity, competitiveness and as an added value, the minimization of the environmental impact. This improvement is expected to be controlled through a Dashboard that helps the Organization measure its performance along the implementation of the model in its productive process.
Abstract: Cast metal inlays can be used on molars requiring a
class II restoration instead amalgam and offer a durable alternative.
Because it is known that class II inlays may increase the
susceptibility to fracture, it is important to ensure optimal
performance in selection of the adequate preparation design to reduce
stresses in teeth structures and also in the restorations. The aim of the
study was to investigate the influence of preparation design on stress
distribution in molars with different class II preparations and in cast
metal inlays. The first step of the study was to achieve 3D models in
order to analyze teeth and cast metal class II inlays. The geometry of
the intact tooth was obtained by 3D scanning using a manufactured
device. With a NURBS modeling program the preparations and the
appropriately inlays were designed. 3D models of first upper molars
of the same shape and size were created. Inlay cavities designs were
created using literature data. The geometrical model was exported
and the mesh structure of the solid 3D model was created for
structural simulations. Stresses were located around the occlusal
contact areas. For the studied cases, the stress values were not
significant influenced by the taper of the preparation. it was
demonstrated stresses are higher in the cast metal restorations and
therefore the strength of the teeth is not affected.
Abstract: The present research focus on the processing of mullite-based ceramics from oil refinery industrial wastes and byproducts of agricultural industry and on the investigating of silane modified surface of ceramics. Two waste products were used as initial material – waste aluminum oxide and waste rice husk. The burning - out additives used were waste rise husk. It is known that the oxide ceramics surface is hydrophilic due to the presence of – OH groups in it. The nature of ceramic surface regarding permeation of water and hydrocarbons can be changed by further treatment with silanes. The samples were studied mainly by X-ray analysis, FT-IR absorbance measurements and microscopic analysis. The X-ray analyses showed the phase composition depends on the firing temperature and on the purity of the starting alumina. Two kind of silanes were used for the transformation of surface from hydrophilic to hydrophobic – trimethoxymethylsilane (TMMS) and trimethylclorsilane (TMCS).
Abstract: The understanding of knee movement during swing
importance for golf swing improving and preventing injury. Thirty
male professional and amateur golfers were assigned to swing time
by time for 3 times. Data from a vedio-based motion capture were
used to compute knee joint movement variables. The results showed
that professional and amateur golfers were significantly in left knee
flexion angle at the impact point and mid follow through phase.
Nevertheless, left knee external rotation in both groups was also
significant. The right knee were no significant different in all
variable. However, pattern of knee joint movement are also likely
between professional and amateur golfers.
Abstract: An experimental study is presented on the effect of
Conservation Agriculture (CA) compared to Conventional
Agriculture (ConvA) upon Maize Yield based on split-plot model.
Two factors have been considered: A Factor-Fertilization with two
variants: A1- N40P40 kg/ha and A2- N90P70 kg/ha; B Factor- Crop
protection with 4 variants : B1- 4 treatments, B2-3 treatments, B3- 2
treatments and B4- 1 treatment. In comparison with conventional
agriculture, CA determined lower maize yields. Fertilization is the
key factor determining a yield gain of 973.58 kg/ha in ConvA and
1,123.33 kg/ha in CA. A reduced number of treatments determined a
yield decline. The A-B interaction had a positive effect on maize
yield when a larger amount of fertilizer and 4 or 3 treatments were
applied in ConvA and a benefic in CA for highest fertilization level
and 2 treatments. The B2A2 ConvA variant was the most efficient
leading to 302.67 kg/ha gain while B3A2 CA variant brought 181.33
kg production gain.
Abstract: Many studies have applied the Theory of Planned
Behavior (TPB) in predicting health behaviors among unique
populations. However, a new paradigm is emerging where focus is
now directed to modification and expansion of the TPB model rather
than utilization of the traditional theory. This review proposes new
models modified from the Theory of Planned Behavior and suggest
an appropriate study design that can be used to test the models within
physical activity and dietary practice domains among Type 2
diabetics in Kenya. The review was conducted by means of literature
search in the field of nutrition behavior, health psychology and
mixed methods using predetermined key words. The results identify
pre-intention and post intention gaps within the TPB model that need
to be filled. Additional psychosocial factors are proposed to be
included in the TPB model to generate new models and the efficacy
of these models tested using mixed methods design.
Abstract: This paper presents an integrated case based and rule
based reasoning method for car faulty diagnosis. The reasoning
method is done through extracting the past cases from the Proton
Service Center while comparing with the preset rules to deduce a
diagnosis/solution to a car service case. New cases will be stored to
the knowledge base. The test cases examples illustrate the
effectiveness of the proposed integrated reasoning. It has proven
accuracy of similar reasoning if carried out by a service advisor from
the service center.
Abstract: We consider here the subsonic impinging jet
representing the flow field of a vertical take-off aircraft or the initial
stage of rocket launching. Implicit Large-Eddy Simulation (ILES) is
used to calculate the time-dependent flow field and the radiate sound
pressure associated with jet impinging. With proper boundary
treatments and high-order numerical scheme, the near field sound
pressure is successfully obtained. Results are presented for both a
rectangular as well a circular jet.
Abstract: This research is to study the performance of heat
pump dryer for drying of kaffir lime leaves under different media and
to compare the color values and essential oil content of final products
after drying. In the experiments, kaffir lime leaves were dried in the
closed-loop system at drying temperatures of 40, 50 and 60 oC. The
drying media used in this study were hot air, CO2 and N2 gases. The
velocity of drying media in the drying chamber was 0.4 m/s with
bypass ratio of 30%. The initial moisture content of kaffir lime leaves
was approximately 180-190 % d.b. It was dried until down to a final
moisture content of 10% d.b. From the experiments, the results
showed that drying rate, the coefficient of performance (COP) and
specific energy consumption (SEC) depended on drying temperature.
While drying media did not affect on drying rate. The time for kaffir
lime leaves drying at 40, 50 and 60 oC was 10, 5 and 3 hours,
respectively. The performance of the heat pump system decreased
with drying temperature in the range of 2.20-3.51. In the aspect of
final product color, the greenness and overall color had a great
change under drying temperature at 60 oC rather than drying at 40
and 50 oC. When compared among drying media, the greenness and
overall color of product dried with hot air at 60 oC had a great change
rather than dried with CO2 and N2.
Abstract: The plant world is the source of many medicines.
Recently, researchers have estimated that there are approximately
400,000 plant species worldwide, of which about a quarter or a third
have been used by societies for medicinal purposes. The human uses
of plants for thousands of years to treat various ailments, in many
developing countries, much of the population trust in traditional
doctors and their collections of medicinal plants to treat them.
Essential oils have many therapeutic properties. In herbal medicine,
they are used for their antiseptic properties against infectious
diseases of fungal origin, against dermatophytes, those of bacterial
origin. The aim of our study is to determine the antimicrobial effect
of essential oils of the plant Trigonella focnum greacum on some
pathogenic bacteria, it is a medicinal plant used in traditional
therapy. The test adopted is based on the diffusion method on solid
medium (Antibiogram), this method determines the sensitivity or
resistance of a microorganism vis-à-vis the extract studied. Our study
reveals that the essential oil of the plant Trigonella focnum greacum
has a different effect on the resistance of germs. For staphiloccocus
Pseudomonnas aeroginosa and Krebsilla, are moderately sensitive
strains, also Escherichia coli and Candida albicans represents a high
sensitivity. By against Proteus is a strain that represents a weak
sensitivity.
Abstract: One of the robust fault detection filter (RFDF)
designing method is based on sliding-mode theory. The main purpose
of our study is to introduce an innovative simplified reference
residual model generator to formulate the RFDF as a sliding-mode
observer without any manipulation package or transformation matrix,
through which the generated residual signals can be evaluated. So the
proposed design is more explicit and requires less design parameters
in comparison with approaches requiring changing coordinates. To
the best author's knowledge, this is the first time that the sliding
mode technique is applied to detect actuator and sensor faults in a
real boiler. The designing procedure is proposed in a drum boiler in
Synvendska Kraft AB Plant in Malmo, Sweden as a multivariable
and strongly coupled system. It is demonstrated that both sensor and
actuator faults can robustly be detected. Also sensor faults can be
diagnosed and isolated through this method.
Abstract: Mobile ad-hoc networks (MANETs) are a form of
wireless networks which do not require a base station for providing
network connectivity. Mobile ad-hoc networks have many
characteristics which distinguish them from other wireless networks
which make routing in such networks a challenging task. Cluster
based routing is one of the routing schemes for MANETs in which
various clusters of mobile nodes are formed with each cluster having
its own clusterhead which is responsible for routing among clusters.
In this paper we have proposed and implemented a distributed
weighted clustering algorithm for MANETs. This approach is based
on combined weight metric that takes into account several system
parameters like the node degree, transmission range, energy and
mobility of the nodes. We have evaluated the performance of
proposed scheme through simulation in various network situations.
Simulation results show that proposed scheme outperforms the
original distributed weighted clustering algorithm (DWCA).
Abstract: This paper aims to study decomposition behavior in
pyrolytic environment of four lignocellulosic biomass (oil palm shell,
oil palm frond, rice husk and paddy straw), and two commercial
components of biomass (pure cellulose and lignin), performed in a
thermogravimetry analyzer (TGA). The unit which consists of a
microbalance and a furnace flowed with 100 cc (STP) min-1 Nitrogen,
N2 as inert. Heating rate was set at 20⁰C min-1 and temperature
started from 50 to 900⁰C. Hydrogen gas production during the
pyrolysis was observed using Agilent Gas Chromatography Analyzer
7890A. Oil palm shell, oil palm frond, paddy straw and rice husk
were found to be reactive enough in a pyrolytic environment of up to
900°C since pyrolysis of these biomass starts at temperature as low as
200°C and maximum value of weight loss is achieved at about
500°C. Since there was not much different in the cellulose,
hemicelluloses and lignin fractions between oil palm shell, oil palm
frond, paddy straw and rice husk, the T-50 and R-50 values obtained
are almost similar. H2 productions started rapidly at this temperature
as well due to the decompositions of biomass inside the TGA.
Biomass with more lignin content such as oil palm shell was found to
have longer duration of H2 production compared to materials of high
cellulose and hemicelluloses contents.
Abstract: This paper deals with the evaluation of flow properties
of polymeric matrix with natural animal fillers. Technical university
of Liberec cooperates on the long-term development of “green
materials“ that should replace conventionally used materials
(especially in automotive industry). Natural fibres (of animal and
plant origin) from all over the world are collected and adapted
(drying, cutting etc.) for extrusion processing. Inside the extruder
these natural additives are blended with polymeric (synthetic and
biodegradable - PLA) matrix and created compound is subsequently
cut for pellets in the wet way. These green materials with unique
recipes are then studied and their mechanical, physical and
processing properties are determined. The main goal of this research
is to develop new ecological materials very similar to unfilled
polymers. In this article the rheological behaviour of chosen natural
animal fibres is introduced considering their shape and surface that
were observed with use of SEM microscopy.
Abstract: This paper presents the work of signal discrimination
specifically for Electrocardiogram (ECG) waveform. ECG signal is
comprised of P, QRS, and T waves in each normal heart beat to
describe the pattern of heart rhythms corresponds to a specific
individual. Further medical diagnosis could be done to determine any
heart related disease using ECG information. The emphasis on QRS
Complex classification is further discussed to illustrate the
importance of it. Pan-Tompkins Algorithm, a widely known
technique has been adapted to realize the QRS Complex
classification process. There are eight steps involved namely
sampling, normalization, low pass filter, high pass filter (build a band
pass filter), derivation, squaring, averaging and lastly is the QRS
detection. The simulation results obtained is represented in a
Graphical User Interface (GUI) developed using MATLAB.
Abstract: This paper presents an Extended Kaman Filter
implementation of a single-camera Visual Simultaneous Localization
and Mapping algorithm, a novel algorithm for simultaneous
localization and mapping problem widely studied in mobile robotics
field. The algorithm is vision and odometry-based, The odometry
data is incremental, and therefore it will accumulate error over time,
since the robot may slip or may be lifted, consequently if the
odometry is used alone we can not accurately estimate the robot
position, in this paper we show that a combination of odometry and
visual landmark via the extended Kalman filter can improve the robot
position estimate. We use a Pioneer II robot and motorized pan tilt
camera models to implement the algorithm.
Abstract: For a long time as a result of accommodating car
traffic, planning ideologies in the past put a low priority on public
space, pedestrianism and the role of city space as a meeting place for
urban dwellers. In addition, according to authors such as Jan Gehl,
market forces and changing architectural perceptions began to shift
the focus of planning practice from the integration of public space in
various pockets around the contemporary city to individual buildings.
Eventually, these buildings have become increasingly more isolated
and introverted and have turned their backs to the realm of the public
space adjoining them. As a result of this practice, the traditional
function of public space as a social forum for city dwellers has in
many cases been reduced or even phased out. Author Jane Jacobs
published her seminal book “The Death and Life of Great American
Cities" more than fifty years ago, but her observations and
predictions at the time still ring true today, where she pointed out
how the dramatic increase in car traffic and its accommodation by the
urban planning ideology that was brought about by the Modern
movement has prompted a separation of the uses of the city. At the
same time it emphasizes free standing buildings that threaten urban
space and city life and result in underutilized and lifeless urban cores.
In this discussion context, the aim of this paper is to showcase a
reversal of just such a situation in the case of the Dasoupolis
neighborhood in Strovolos, Cyprus, where enlightened urban design
practice has see the reclamation of pedestrian space in a car
dominated area.
Abstract: Among the many promising nanomaterials with antifungal properties, metal nanoparticles (silver nanoparticles) stand out due to their high chemical activity. Therefore, the aim of this study was to evaluate the effect of silver nanoparticles (AgNPs) against Phomopsis sp. AgNPs were synthesized by silver nitrate reduction with sodium citrate and stabilized with ammonia. The synthesized AgNPs have further been characterized by UV/Visible spectroscopy, Biophysical techniques like Dynamic light scattering (DLS) and Scanning Electron Microscopy (SEM). The average diameter of the prepared silver colloidal nanoparticles was about 52 nm. Absolute inhibitions (100%) were observed on treated with a 270 and 540 µg ml-1 concentration of AgNPs. The results from the study of the AgNPs antifungal effect are significant and suggest that the synthesized silver nanoparticles may have an advantage compared with conventional fungicides.