Abstract: The purposes of this paper are to (1) promote excellence in computer science by suggesting a cohesive innovative approach to fill well documented deficiencies in current computer science education, (2) justify (using the authors' and others anecdotal evidence from both the classroom and the real world) why this approach holds great potential to successfully eliminate the deficiencies, (3) invite other professionals to join the authors in proof of concept research. The authors' experiences, though anecdotal, strongly suggest that a new approach involving visual modeling technologies should allow computer science programs to retain a greater percentage of prospective and declared majors as students become more engaged learners, more successful problem-solvers, and better prepared as programmers. In addition, the graduates of such computer science programs will make greater contributions to the profession as skilled problem-solvers. Instead of wearily rememorizing code as they move to the next course, students will have the problem-solving skills to think and work in more sophisticated and creative ways.
Abstract: In this paper back-propagation artificial neural
network (BPANN) with Levenberg–Marquardt algorithm is
employed to predict the limiting drawing ratio (LDR) of the deep
drawing process. To prepare a training set for BPANN, some finite
element simulations were carried out. die and punch radius, die arc
radius, friction coefficient, thickness, yield strength of sheet and
strain hardening exponent were used as the input data and the LDR
as the specified output used in the training of neural network. As a
result of the specified parameters, the program will be able to
estimate the LDR for any new given condition. Comparing FEM and
BPANN results, an acceptable correlation was found.
Abstract: Whereas cellular wireless communication systems are
subject to short-and long-term fading. The effect of wireless channel
has largely been ignored in most of the teletraffic assessment
researches. In this paper, a mathematical teletraffic model is proposed
to estimate blocking and forced termination probabilities of cellular
wireless networks as a result of teletraffic behavior as well as the
outage of the propagation channel. To evaluate the proposed
teletraffic model, gamma inter-arrival and general service time
distributions have been considered based on wireless channel fading
effect. The performance is evaluated and compared with the classical
model. The proposed model is dedicated and investigated in different
operational conditions. These conditions will consider not only the
arrival rate process, but also, the different faded channels models.
Abstract: In the present work we model a Multiquantum Well
structure Separate Absorption and Charge Multiplication Avalanche
Photodiode (MQW-SACM-APD), while the Absorption region
coincide with the MQW. We consider the nonuniformity of electric
field using split-step method in active region. This model is based on
the carrier rate equations in the different regions of the device. Using
the model we obtain the photocurrent, and dark current. As an
example, InGaAs/InP SACM-APD and MQW-SACM-APD are
simulated. There is a good agreement between the simulation and
experimental results.
Abstract: Migration in breast cancer cell wound healing assay
had been studied using image fractal dimension analysis. The
migration of MDA-MB-231 cells (highly motile) in a wound healing
assay was captured using time-lapse phase contrast video microscopy
and compared to MDA-MB-468 cell migration (moderately motile).
The Higuchi fractal method was used to compute the fractal
dimension of the image intensity fluctuation along a single pixel
width region parallel to the wound. The near-wound region fractal
dimension was found to decrease three times faster in the MDA-MB-
231 cells initially as compared to the less cancerous MDA-MB-468
cells. The inner region fractal dimension was found to be fairly
constant for both cell types in time and suggests a wound influence
range of about 15 cell layer. The box-counting fractal dimension
method was also used to study region of interest (ROI). The MDAMB-
468 ROI area fractal dimension was found to decrease
continuously up to 7 hours. The MDA-MB-231 ROI area fractal
dimension was found to increase and is consistent with the behavior
of a HGF-treated MDA-MB-231 wound healing assay posted in the
public domain. A fractal dimension based capacity index has been
formulated to quantify the invasiveness of the MDA-MB-231 cells in
the perpendicular-to-wound direction. Our results suggest that image
intensity fluctuation fractal dimension analysis can be used as a tool
to quantify cell migration in terms of cancer severity and treatment
responses.
Abstract: Delivering course material via a virtual environment
is beneficial to today-s students because it offers the interactivity,
real-time interaction and social presence that students of all ages
have come to accept in our gaming rich community. It is essential
that the Net Generation also known as Generation Why, have
exposure to learning communities that encompass interactivity to
form social and educational connections. As student and professor
become interconnected through collaboration and interaction in a
virtual learning space, relationships develop and students begin to
take on an individual identity. With this in mind the research project
was developed to investigate the use of virtual environments on
student satisfaction and the effectiveness of course delivery.
Furthermore, the project was designed to integrate both interactive
(real-time) classes conducted in the Virtual Reality (VR)
environment while also creating archived VR sessions for student use
in retaining and reviewing course content.
Abstract: This study deals with Computational Fluid Dynamics
(CFD) studies of the interactions between the air flow and louvered
fins which equipped the automotive heat exchangers. 3D numerical
simulation results are obtained by using the ANSYS Fluent 13.0 code
and compared to experimental data. The paper studies the effect of
louver angle and louver pitch geometrical parameters, on overall
thermal hydraulic performances of louvered fins.
The comparison between CFD simulations and experimental data
show that established 3-D CFD model gives a good agreement. The
validation agrees, with about 7% of deviation respectively of friction
and Colburn factors to experimental results. As first, it is found that
the louver angle has a strong influence on the heat transfer rate. Then,
louver angle and louver pitch variation of the louvers and their effects
on thermal hydraulic performances are studied. In addition to this
study, it is shown that the second half of the fin takes has a
significant contribution on pressure drop increase without any
increase in heat transfer.
Abstract: Snake bite cases in Malaysia most often involve the
species Naja-naja and Calloselasma rhodostoma. In keeping with the
need for a rapid snake venom detection kit in a clinical setting, plate
and dot-ELISA test for the venoms of Naja-naja sumatrana,
Calloselasma rhodostoma and the cobra venom fraction V antigen
was developed. Polyclonal antibodies were raised and further used to
prepare the reagents for the dot-ELISA test kit which was tested in
mice, rabbit and virtual human models. The newly developed dot-
ELISA kit was able to detect a minimum venom concentration of
244ng/ml with cross reactivity of one antibody type. The dot-ELISA
system was sensitive and specific for all three snake venom types in
all tested animal models. The lowest minimum venom concentration
detectable was in the rabbit model, 244ng/ml of the cobra venom
fraction V antigen. The highest minimum venom concentration was
in mice, 1953ng/ml against a multitude of venoms. The developed
dot-ELISA system for the detection of three snake venom types was
successful with a sensitivity of 95.8% and specificity of 97.9%.
Abstract: The knowledge base of welding defect recognition is
essentially incomplete. This characteristic determines that the recognition results do not reflect the actual situation. It also has a further influence on the classification of welding quality. This paper is
concerned with the study of a rough set based method to reduce the influence and improve the classification accuracy. At first, a rough set
model of welding quality intelligent classification has been built. Both condition and decision attributes have been specified. Later on, groups
of the representative multiple compound defects have been chosen
from the defect library and then classified correctly to form the
decision table. Finally, the redundant information of the decision table has been reducted and the optimal decision rules have been reached. By this method, we are able to reclassify the misclassified defects to
the right quality level. Compared with the ordinary ones, this method
has higher accuracy and better robustness.
Abstract: In this paper, by exploiting a single semiconductor
optical amplifier-Mach Zehnder Interferometer (SOA-MZI), an
integratable all-optical flip-flop (AOFF) is proposed. It is composed
of a SOA-MZI with a bidirectional coupler at the output. Output
signals of both bar and crossbar of the SOA-MZI is fed back to SOAs
located in the arms of the Mach-Zehnder Interferometer (MZI). The
injected photon-rates to the SOAs are modulated by feedback signals
in order to form optical flip-flop. According to numerical analysis,
Gaussian optical pulses with the energy of 15.2 fJ and 20 ps duration
with the full width at half-maximum criterion, can switch the states of
the SR-AOFF. Also simulation results show that the SR-AOFF has
the contrast ratio of 8.5 dB between two states with the transition
time of nearly 20 ps.
Abstract: The present work is concerned with the effect of turning process parameters (cutting speed, feed rate, and depth of cut) and distance from the center of work piece as input variables on the chip micro-hardness as response or output. Three experiments were conducted; they were used to investigate the chip micro-hardness behavior at diameter of work piece for 30[mm], 40[mm], and 50[mm]. Response surface methodology (R.S.M) is used to determine and present the cause and effect of the relationship between true mean response and input control variables influencing the response as a two or three dimensional hyper surface. R.S.M has been used for designing a three factor with five level central composite rotatable factors design in order to construct statistical models capable of accurate prediction of responses. The results obtained showed that the application of R.S.M can predict the effect of machining parameters on chip micro-hardness. The five level factorial designs can be employed easily for developing statistical models to predict chip micro-hardness by controllable machining parameters. Results obtained showed that the combined effect of cutting speed at it?s lower level, feed rate and depth of cut at their higher values, and larger work piece diameter can result increasing chi micro-hardness.
Abstract: This paper describes the shape optimization of impeller
blades for a anti-heeling bidirectional axial flow pump used in ships.
In general, a bidirectional axial pump has an efficiency much lower
than the classical unidirectional pump because of the symmetry of the
blade type. In this paper, by focusing on a pump impeller, the shape of
blades is redesigned to reach a higher efficiency in a bidirectional axial
pump. The commercial code employed in this simulation is CFX v.13.
CFD result of pump torque, head, and hydraulic efficiency was
compared. The orthogonal array (OA) and analysis of variance
(ANOVA) techniques and surrogate model based optimization using
orthogonal polynomial, are employed to determine the main effects
and their optimal design variables. According to the optimal design,
we confirm an effective design variable in impeller blades and explain
the optimal solution, the usefulness for satisfying the constraints of
pump torque and head.
Abstract: In this paper, we propose the Modified Synchronous Detection (MSD) Method for determining the reference compensating currents of the shunt active power filter under non sinusoidal voltages conditions. For controlling the inverter switching we used the PI regulator. The numerical simulation results, using Power System Blockset Toolbox PSB of Matlab, from a complete structure, are presented and discussed.
Abstract: In this study, inhibition of Microcystis aeruginosa by
antialgal alleochemical gramine, was studied by analyzing algal
metabolic activity (represented by esterase and total dehydrogenase
activities) and cell ultrastructure (showing morphological and
ultrastructure alterations using transmission electron microscopy and
DNA ladder analysis). After gramine exposure, esterase and total
dehydrogenase activities were increased firstly but decreased later. In
contrast with the controls, the cells exposed to gramine showed
apparent ultrastructure alterations with thylakoids in breakage,
phycobilins in decrease, lipid and cyanophycin granules abundant
firstly but dissolved afterwards, DNA in fragementation. The
occurrence of increase of metabolic activity and specific granules
reflected that the resistance of cellular response to gramine was
initiated. DNA fragementation associated with the increase of
metabolic activity and specific granules hinted that gramine caused M.
aeruginosa cells to initiate some morphotype of programmed cell
death.
Abstract: A numerical study has been carried out to investigate
the heat transfer by natural convection of nanofluid taking Cu as
nanoparticles and the water as based fluid in a three dimensional
annulus enclosure filled with porous media (silica sand) between two
horizontal concentric cylinders with 12 annular fins of 2.4mm
thickness attached to the inner cylinder under steady state conditions.
The governing equations which used are continuity, momentum and
energy equations under an assumptions used Darcy law and
Boussinesq-s approximation which are transformed to dimensionless
equations. The finite difference approach is used to obtain all the
computational results using the MATLAB-7. The parameters affected
on the system are modified Rayleigh number (10 ≤Ra*≤ 1000), fin
length Hf (3, 7 and 11mm), radius ratio Rr (0.293, 0.365 and 0.435)
and the volume fraction(0 ≤ ¤ò ≤ 0 .35). It was found that the
average Nusselt number depends on (Ra*, Hf, Rr and φ). The results
show that, increasing of fin length decreases the heat transfer rate and
for low values of Ra*, decreasing Rr cause to decrease Nu while for
Ra*
greater than 100, decreasing Rr cause to increase Nu and adding
Cu nanoparticles with 0.35 volume fraction cause 27.9%
enhancement in heat transfer. A correlation for Nu in terms of Ra*,
Hf and φ, has been developed for inner hot cylinder.
Abstract: In this paper, we present a vertical nanowire thin film transistor with gate-all-around architecture, fabricated using CMOS compatible processes. A novel method of fabricating polysilicon vertical nanowires of diameter as small as 30 nm using wet-etch is presented. Both n-type and p-type vertical poly-silicon nanowire transistors exhibit superior electrical characteristics as compared to planar devices. On a poly-crystalline nanowire of 30 nm diameter, high Ion/Ioff ratio of 106, low drain-induced barrier lowering (DIBL) of 50 mV/V, and low sub-threshold slope SS~100mV/dec are demonstrated for a device with channel length of 100 nm.
Abstract: This paper deals with the design, development & implementation of a temperature sensor using zigbee. The main aim of the work undertaken in this paper is to sense the temperature and to display the result on the LCD using the zigbee technology. ZigBee operates in the industrial, scientific and medical (ISM) radio bands; 868 MHz in Europe, 915 MHz in the USA and 2.4 GHz in most jurisdictions worldwide. The technology is intended to be simpler and cheaper than other WPANs such as Bluetooth. The most capable ZigBee node type is said to require only about 10 % of the software of a typical Bluetooth or Wireless Internet node, while the simplest nodes are about 2 %. However, actual code sizes are much higher, more like 50 % of the Bluetooth code size. ZigBee chip vendors have announced 128-kilobyte devices. In this work undertaken in the design & development of the temperature sensor, it senses the temperature and after amplification is then fed to the micro controller, this is then connected to the zigbee module, which transmits the data and at the other end the zigbee reads the data and displays on to the LCD. The software developed is highly accurate and works at a very high speed. The method developed shows the effectiveness of the scheme employed.
Abstract: A newly designed gas-distributor for granulation of powdery materials in equilibrated fluidized bed and a system for collecting the granules prepared are suggested. The aim of these designs is to solve the problems arising by the granulation of powdery materials in fluidized bed devices. The gasdistributor and the collection system proved to be reliable at operation; they reduce the size of still zones, effectively disperse the binding solution in the bed and ensure the collection of granules of given diameter
Abstract: Communication is an important factor and a prop in
directing corporate activities efficiently, in ensuring the flow of
knowledge which is necessary for the continuity of the institution, in
creating a common language in the institution, in transferring
corporate culture and ultimately in corporate success. The idea of
transmitting the knowledge among the workers in a healthy manner
has revived knowledge communication. Knowledge communication
can be defined as the act of mutual creation and communication of
intuitions, assessments, experiences and capabilities, as long as
maintained effectively, can provide advantages such as corporate
continuity, access to corporate objectives and making true
administrative decisions. Although the benefits of the knowledge
communication to corporations are known, and the necessary worth
and care is given, some hardships may arise which makes it difficult
or even block it. In this article, difficulties that prevent knowledge
communication will be discussed and solutions will be proposed.