Using 3-Glycidoxypropyltrimethoxysilane Functionalized SiO2 Nanoparticles to Improve Flexural Properties of Glass Fibers/Epoxy Grid-Stiffened Composite Panels

Lightweight and efficient structures have the aim to enhance the efficiency of the components in various industries. Toward this end, composites are one of the most widely used materials because of durability, high strength and modulus, and low weight. One type of the advanced composites is grid-stiffened composite (GSC) structures, which have been extensively considered in aerospace, automotive, and aircraft industries. They are one of the top candidates for replacing some of the traditional components, which are used here. Although there are a good number of published surveys on the design aspects and fabrication of GSC structures, little systematic work has been reported on their material modification to improve their properties, to our knowledge. Matrix modification using nanoparticles is an effective method to enhance the flexural properties of the fibrous composites. In the present study, a silanecoupling agent (3-glycidoxypropyltrimethoxysilane/3-GPTS) was introduced onto the silica (SiO2) nanoparticle surface and its effects on the three-point flexural response of isogrid E-glass/epoxy composites were assessed. Based on the Fourier Transform Infrared Spectrometer (FTIR) spectra, it was inferred that the 3-GPTS coupling agent was successfully grafted onto the surface of SiO2 nanoparticles after modification. Flexural test revealed an improvement of 16%, 14%, and 36% in stiffness, maximum load and energy absorption of the isogrid specimen filled with 3 wt.% 3- GPTS/SiO2 compared to the neat one. It would be worth mentioning that in these structures, considerable energy absorption was observed after the primary failure related to the load peak. In addition, 3- GPTMS functionalization had a positive effect on the flexural behavior of the multiscale isogrid composites. In conclusion, this study suggests that the addition of modified silica nanoparticles is a promising method to improve the flexural properties of the gridstiffened fibrous composite structures.

Authors:

• Reza Eslami-Farsani
• Hamed Khosravi
• Saba Fayazzadeh

Keywords:

• Isogrid-stiffened composite panels
• silica nanoparticles
• surface modification
• flexural properties.

References:

[1] V. V. Vasiliev, and A. F. Razin, “Anisogrid composite lattice structures
for spacecraft and aircraft applications,” Compos Struct, vol. 76, pp.
182-189, 2006.
[2] C. Gan, R. Gibson, and G. Newaz, “Analytical/experimental
investigation of energy absorption in grid-stiffened composite structures
under transverse loading,” Exp Mech, vol. 44(2), pp. 185-194, 2004.
[3] P. Jadhav, and P. R. Mantena, “Parametric optimization of grid-stiffened
composite panels for maximizing their performance under transverse
loading,” Compos Struct, vol. 77, pp. 353-363, 2007.
[4] M. M. Shokrieh, A. Saeedi, and M. Chitsazzadeh, “Evaluating the
effects of multi-walled carbon nanotubes on the mechanical properties of
chopped strand mat/polyester composites,” Mater Des, vol. 56, pp. 274-
279, 2014.
[5] A. Mirzapour, M. H. Asadollahi, S. Baghshaei and M. Akbari, “Effect of
nanosilica on the microstructure, thermal properties and bending
strength of nanosilica modified carbon fiber/phenolic nanocomposite,”
Compos Part A, vol. 63, pp. 159- 167, 2014.
[6] M.F. Uddin and C. T. Sun, “Strength of unidirectional glass/epoxy
composite with silica nanoparticle-enhanced matrix,” Compos Sci
Technol, vol. 68, pp. 1637-1643, 2008.
[7] Kang S, Hong S, Choe C. R. et al. “Preparation and characterization of
epoxy composites filled with functionalized nanosilica particles obtained
via sol–gel process,” Polym, vol. 42, pp. 879-887, 2010.
[8] G. Y. Heo, and S. J. Park, “Effect of coupling agents on thermal, flow,
and adhesion properties of epoxy/silica compounds for capillary
underfill applications,” Powder Technol, vol. 230, pp. 145-150, 2012.
[9] D. K. Shukla, S. V. Kasisomayajula, and V. Parameswaran, “Epoxy
composites using functionalized alumina platelets as reinforcements,”
Compos Sci Technol, vol. 68, pp. 3055-3063, 2008.
[10] M. Mandhakini, T. Lakshmikandhan, A. Chandramohan, and M. Alagar,
“Effect of nanoalumina on the tribology performance of C4-ether-linked
bismaleimide-toughened epoxy nanocomposites,” Tribol Lett, vol. 54,
pp. 67-79, 2014.
[11] M. Ayatollahi, E. Alishahi, and S. Shadlou, “Mechanical behavior of
nanodiamond/epoxy nanocomposites,” Int J Fract, vol. 170, pp. 95-100,
2011.
[12] I. Srikanth, A. Daniel, S. Kumar, et al. “Nanosilica modified carbonphenolic
composites for enhanced ablation resistance,” Scripta Mater,
vol. 63, pp. 200-203, 2010.
[13] S. Houshyar, A. Shanks, and A. Hodzic, “Modeling of polypropylene
fiber-matrix composites using finite element analysis,” eXPRESS Poly
Lett, vol. 3, pp. 2-12, 2009.
[14] A. J. Kinloch, and A. C. Taylor, “The toughening of cyanate-ester
polymers-part I-physical modification using particles, fibers and wovenmats,”
J Mater Sci, vol. 37, pp. 433-460, 2002.