The Extraction and Stripping of Hg (II) from Produced Water via Hollow Fiber Contactor

The separation of Hg (II) from produced water by hollow fiber contactors (HFC) was investigation. This system included of two hollow fiber modules in the series connecting. The first module used for the extraction reaction and the second module for stripping reaction. Aliquat336 extractant was fed from the organic reservoirs into the shell side of the first hollow fiber module and continuous to the shell side of the second module. The organic liquid was continuously feed recirculate and back to the reservoirs. The feed solution was pumped into the lumen (tube side) of the first hollow fiber module. Simultaneously, the stripping solution was pumped in the same way in tube side of the second module. The feed and stripping solution was fed which had a countercurrent flow. Samples were kept in the outlet of feed and stripping solution at 1 hour and characterized concentration of Hg (II) by Inductively Couple Plasma Atomic Emission Spectroscopy (ICP-AES). Feed solution was produced water from natural gulf of Thailand. The extractant was Aliquat336 dissolved in kerosene diluent. Stripping solution used was nitric acid (HNO3) and thiourea (NH2CSNH2). The effect of carrier concentration and type of stripping solution were investigated. Results showed that the best condition were 10 % (v/v) Aliquat336 and 1.0 M NH2CSNH2. At the optimum condition, the extraction and stripping of Hg (II) were 98% and 44.2%, respectively.




References:
[1] D. W. Boening, Ecological effects, transport, and fate of mercury: a
general review, Chemosphere, 40:1335-1351, 2000.
[2] H.-B. Lia, S. Yua, G.-L. Lia, H. Deng, B .Xu, J. Ding, J.-B. Gao, Y.-W.
Hong and M.-H. Wong, Spatial distribution and historical records of
mercury sedimentation in urban lakes under urbanization impacts, Sci.
Total. Environ 445–446:117-125, 2013.
[3] C. Deng, D. Zhang, X. Pan, F. Chang and S. Wang, Toxic effects of
mercury on PSI and PSII activities, membrane potential and
transthylakoid proton gradient in Microsorium pteropus, J. Photoch.
Photobio. B., 127:1-7, 2013.
[4] Thailand regulatory discharge standards, Ministry of Industry, Thailand.
1996.
[5] B. Zhang, J. Liu, C. Zheng and M. Chang, Theoretical study of mercury
species adsorption mechanism on MnO2 (1 1 0) surface, Chem. Eng. J.,
256:93-100, 2014.
[6] R. Meera, T. Francis and M.L.P. Reddy, Studies on the liquid–liquid
extraction of mercury (II) from acidic chloride solutions using Cyanex
923. Hydrometallurgy, 61:97-103, 2001.
[7] F. B. M. Fabrega and M.B. Mansur, Liquid - liquid extraction of
mercury (II) from hydrochloric acid solutions by Aliquat 336,
Hydrometallurgy, 87:83-90, 2007.
[8] S. A. Ansari, P. K. Mohapatra, M. Iqbal, P. Kandwal, J. Huskens and W.
verboom, Novel diglycolamide-functionalized calix(4)arenes for actinide
extraction and supported liquid membrane studies: Role of substituents
in the pendent arms and mass transfer modeling, J. Membrane Sci.,
430:304–311, 2013.
[9] K. Chakrabarty, P. Saha and A.K. Ghoshal, Separation of mercury from
its aqueous solution through supported liquid membrane using
environmentally benign diluent, J. Membrane Sci., 350:395-401, 2010.
[10] Q. Li, Q. Liu and X. Wei, Separation study of mercury through an
emulsion liquid membrane, Talanta, 43:1837-1842, 1996. [11] A. Jabbari, M. Esmaeili and M. Shamsipur, Selective transport of
mercury as HgCl4
2− through a bulk liquid membrane using K+-
dicyclohexyl-18-crown-6 as carrier, Sep. Purif. Technol., 24:139-145,
2001.
[12] C. Fontàs, V. Salvadó and M. Hidalgo, Selective enrichment of
palladium from spent automotive catalysts by using a liquid membrane
system, J. Membrane Sci., 223:39-48, 2003.
[13] H.-D. Zheng, B.-Y. Wang, Y.-X. Wu, Q.-L. Ren, Instability mechanisms
of supported liquid membranes for copper (II) ion extraction, Colloid.
Surface. A., 351:38-45, 2009.
[14] I.M. Coelhoso, M.M. Cardoso, R.M.C. Viegas and J.P.S.G. Crespo,
Transport mechanisms and modelling in liquid membrane contactors,
Sep. Purif. Technol., 19:183-197, 2000.
[15] A. Gugliuzza, A. Basile, 2 - Membrane contactors: fundamentals,
membrane materials and key operations, in: A. Basile (Ed.) Handbook of
Membrane Reactors, Woodhead Publishing, 2013, pp. 54 – 106.