Simulink Library for Reference Current Generation in Active DC Traction Substations

This paper is focused on the reference current calculation in the compensation mode of the active DC traction substations. The so-called p-q theory of the instantaneous reactive power is used as theoretical foundation. The compensation goal of total compensation is taken into consideration for the operation under both sinusoidal and nonsinusoidal voltage conditions, through the two objectives of unity power factor and perfect harmonic cancelation. Four blocks of reference current generation implement the conceived algorithms and they are included in a specific Simulink library, which is useful in a DSP dSPACE-based platform working under Matlab/Simulink. The simulation results validate the correctness of the implementation and fulfillment of the compensation tasks.




References:
[1] X. Xu and B. Chen, “Study on Synthesis Control of Power Quality for
Electrified Railway,” in Proc. Workshop on Power Electronics and
Intelligent Transportation System, Guangzhou, Aug 2008, pp. 110-112.
[2] X. Xu and B. Chen, “Research on Power Quality Control for Railway
Traction Power Supply System,” in Proc. Pacific-Asia Conf. Circuits,
Communications and Systems, Chengdu, May 2009, pp. 306-309.
[3] S. J. Jang, C. Y. Choi, C. H. Bae, S. H. Song, and C. Y. Won, "Study of
Regeneration Power Control Inverter for DC Traction with Active
Power Filter Ability", in Proc. 31st Annual Conf. of IEEE, Nov. 2005.
[4] G. Ramos, E. Cantor, M. A. Rios, and L. F. Roa, “Instantaneous p-q
Theory for Harmonic Compensation with Active Power Filter in DC
Traction Systems,” in Proc. 2011 International Conf. Power
Engineering, Energy and Electrical Drives, Malaga. May 2011, pp. 1-5.
[5] P. H. Henning, H. D. Fuchs, A. D. L. Roux, and H. A. T. Mouton, “1.5-
MW Seven-Cell Series-Stacked Converter as an Active Power Filter and
Regeneration Converter for a DC Traction Substation,” IEEE Trans.
Power Electronics, vol. 23, no. 5, pp. 2230-2236, Sept. 2008.
[6] Y. Warin, R. Lanselle, and M. Thiounn, “Active Substation,” in Proc.
World Congress on Railway Research, Lille, May 2011.
[7] A. Bitoleanu, M. Popescu, Filtre Active de Putere. Universitaria
Craiova, 2010.
[8] A. Bitoleanu, M. Popescu, D. Marin, and M. Dobriceanu, “LCL
Interface Filter Design for Shunt Active Power Filters,” in Advances in
Electrical and Computer Engineering, Vol. 10, no. 3, pp. 55-60, Aug.
2010.
[9] A. Bitoleanu, S. Ivanov, and M. Popescu, Convertoare Statice.
INFOMED Craiova, 1997.
[10] A. Bitoleanu, D. Mihai, M. Popescu, and C. Constantinescu,
Convertoare Statice si Structuri de Comanda Performante. Sitech
Craiova, 2000.
[11] J.M. Ortega, H. Ibaiondo, and A. Romo, “Kinetic Energy Recovery on
Railway Systems with Feedback to the Grid,” in Proc. 9th World
Congress on Railway Research, May 22–26, 2011.
[12] H. Akagi, Y. Kanazawa, and A. Nabae, "Generalized Theory of the
Instantaneous Reactive Power in Three-Phase Circuits," in Proc. Int.
Power Electronics Conf., Tokyo, 1983, pp. 1375-1386.
[13] H. Akagi, Y. Kanazawa, and A. Nabae, "Instantaneous Reactive Power
Compensators Comprising Switching Devices without Energy Storage
Components," IEEE Trans. Ind. Appl., no. 3, pp. 625-630, 1984.
[14] J. L. Willems, "A New Interpretation of the Akagi-Nabae Power
Components for Nonsinusoidal Three-Phase Situations," IEEE Trans.
Instrum. Meas., vol. 41, no. 4, pp. 523-527, Aug. 1992.
[15] H. Kim, F. Blaabjerg , B. Bak-Jensen, and J. Choi," Instantaneous Power
Compensation in Three-Phase Systems by Using p-q-r Theory," IEEE
Trans. Power Electronics, vol. 17, no. 5, pp. 701-710, Sept. 2002.
[16] A. Ferrero and G. Superti-Furga, "A New Approach to the Definition of
Power Components in Three-Phase Systems Under Nonsinusoidal
Conditions," IEEE Trans. Instrum. Meas., vol. 40, pp. 568-577, June
1991.
[17] A. Ferrero, A. P. Morando, R. Ottoboni, and G. Superti-Furga, "On the
Meaning of the Park Power Components in Three-Phase Systems under
Non-Sinusoidal Conditions," ETEP, vol. 3, pp. 33-43, Jan. 1993.
[18] M. Popescu, A. Bitoleanu, and V. Suru, "A DSP-Based Implementation
of the p-q Theory in Active Power Filtering under Nonideal Voltage
Conditions," IEEE Trans. Ind. Informat., vol. 9 , no. 2, pp. 880-889,
May 2013.
[19] A. Bitoleanu and M. Popescu, “How can the IRP p-q Theory be Applied
for Active Filtering under Nonsinusoidal Voltage Operation?,” Przegląd
Elektrotechniczny, vol. 2011, no. 1, pp. 67-71, 2011.
[20] M. Popescu, A. Bitoleanu, and V. Suru, “Time-Domain Based Active
Compensation Strategies under Nonsinusoidal Conditions in Three-
Phase Three-Wire Systems,” Annals of the University of Craiova,
Electrical Engineering series, no. 35, pp.19-24, 2011.
[21] IEEE Recommended Practice and Requirements for Harmonic Control
in Electrical Power Systems, IEEE Std. 519-1992. [22] V. Soares, P. Verdelho, and G. D.Marques, "An Instantaneous Active
and Reactive Current Component Method for Active Filters," IEEE
Trans. Power Electron., vol. 15, no. 4, pp. 660-669, 2000.
[23] M. Kale and E. Ozdemir, "Harmonic and Reactive Power Compensation
with Shunt Active Power Filter under Non-Ideal Mains Voltage",
Electric Power Systems Research, Vol. 74, no. 3, pp. 363-370, 2005.