Production of Carbon Nanotubes by Iron Catalyst

Carbon nanotubes (CNTs) with their high mechanical, electrical, thermal and chemical properties are regarded as promising materials for many different potential applications. Having unique properties they can be used in a wide range of fields such as electronic devices, electrodes, drug delivery systems, hydrogen storage, textile etc. Catalytic chemical vapor deposition (CCVD) is a common method for CNT production especially for mass production. Catalysts impregnated on a suitable substrate are important for production with chemical vapor deposition (CVD) method. Iron catalyst and MgO substrate is one of most common catalyst-substrate combination used for CNT. In this study, CNTs were produced by CCVD of acetylene (C2H2) on magnesium oxide (MgO) powder substrate impregnated by iron nitrate (Fe(NO3)3•9H2O) solution. The CNT synthesis conditions were as follows: at synthesis temperatures of 500 and 800°C multiwall and single wall CNTs were produced respectively. Iron (Fe) catalysts were prepared by with Fe:MgO ratio of 1:100, 5:100 and 10:100. The duration of syntheses were 30 and 60 minutes for all temperatures and catalyst percentages. The synthesized materials were characterized by thermal gravimetric analysis (TGA), transmission electron microscopy (TEM) and Raman spectroscopy.

Authors:

• Ezgi Dündar-Tekkaya
• Nilgün Karatepe

Keywords:

• Carbon nanotube
• catalyst
• catalytic chemical vapordeposition
• iron

References:

[1] Pileni, M.P., "Nanostructured materials, Selected synthesis methods,
properties and applications", edited by Knauth, P., Schoonman,
J.,Kluwer Academic Publishers, 2002, pp 1-22.
[2] Kroto, H. W., Heath, J. R., O-Brien, S. C., Curl, R. F., and Smalley, R.
E., "C-60- Buckminsterfullerene", Nature, vol. 318, p. 162, 1985.
[3] Iijima, S., "Helical microtubules of graphitic carbon", Nature, Vol. 354,
pp. 56-58, 1991.
[4] [14] Bethune, D.S., Kiang, C.H., de Vries, M.S., Gorman, G., Savoy, R.,
Vazquez, J., and Beyers, R., "Cobalt-catalysed growth of carbon
nanotubes with single-atomic-layer walls", Nature, 363, pp. 605-607,
1993.
[5] Bacon, R., Growth, structure, and properties of graphite whiskers,
Journal of Applied Physics, Vol. 31, p 283,1960.
[6] Zettl, A., Saito, S., 2008: Carbon Nanotubes: Quantum cylinders of
graphene, Elsevier, Oxford
[7] Treacy, M. M. J., Ebbesen, T. W., and Gibson, J. M., "Exceptionally
high Young-s modulus observed for individual carbon nanotubes",
Nature, Vol. 381, Issue 6584, p 678, 1996.
[8] Nakayama, Y., Akita, S., and Shimada, Y., "Thermally activated
electrical conduction in carbon nanotubes", Japanese Journal of Applied
Physics, Vol. 34, pp L10-12, 1995.
[9] Dillon, A.C., Jones, K.M., Bekkedahl, T.A., Kiang, C.H., Bethune,
D.S., and Haben, M.J., "Storage of hydrogen in single walled carbon
nanotubes", Nature Vol. 386, Issue 6623, p. 377, 1997.
[10] Yacaman, M. J., Yoshida, M., Rendon, L., Santiesteban, J. G., "Catalytic
growth of carbon microtubules with fullerene structure", Applied
Physics Letters, Vol. 62, p 657, 1993.
[11] O-Connel, M.J., "Carbon nanotubes: Properties and Applications",
Taylor & Francis., Florida, 2006.
[12] Mukhopadhyay, K., Koshio, K., Tanaka, N., and Shinohara, H., "A
simple and novel way to synthesize aligned nanotube bundles at low
temperature", Japanese Journal of Applied Physics, Vol. 37: L1257,
1998.
[13] Maruyama, S., Kojima, R., Miyauchi, Y., Chiashi, S., and Kohno, M.,
"Low-temperature synthesis of high-purity single-walled carbon
nanotubes from alcohol", Chemical Physics Letters, Vol. 360, p. 229,
2002.
[14] [Endo, M., Takeuchi, K., Igarashi, S., Kobori, K., Shiraishi, M., and
Kroto, H.W., "The production and structure of pyrolytic carbon
nanotubes (PCNTs)", Journal of the Physics and Chemistry of Solids,
Vol. 54, pp. 1841-1848, 1993.
[15] Colomer, J. F., Piedigrosso, P., Willems, I., Journet, C., Bernier, P.,
Van Tendeloo G., Fonseca, A., and Nagy, J. B., "Purification of
catalytically produced MWCNTs", Journal of The Chemical Society,
Faraday Transactions, Vol. 94, pp. 3753-3358, 1998.
[16] Liew, K.M., Wong, C.H., Tan, M.J., "Buckling properties of carbon
nanotube bundles", Applied Physics Letters, Vol. 87, 041901, 2005.
[17] Nagaraju, N., Fonseca, A., Konya, Z., and Nagy, J.B., "Alumina and
silica supported metal catalysts for the production of carbon nanotubes",
Journal of Molecular Catalysis A: Chemical, Vol. 181, p. 57, 2002.
[18] Seo, J.W., Hernadi, K., Miko, C., and Forro, L., "Behaviour of transition
metals catalysts over laser-treated vanadium support surfaces in the
decomposition of acetylene", Applied Catalysis A: General, Vol. 260, p.
87, 2004.
[19] Willems, I., Konya, Z., Colomer, J. F., Tendelo, G. V., Nagaraju, N.,
Fonseca, A., and Nagy J. B., "Control of the outer diameter of thin
carbon nanotubes synthesized by catalytic decomposition of
hydrocarbons." Chemical Physics Letters, Vol. 317, pp. 71-76, 2001.
[20] Thaib, A., Martin, G.A., Pinheiro, P., Schouler, M.C., and Gadelle, P.,
"Formation of carbon nanotubes from the carbon monoxide
disproportionation reaction over Co/Al2O3 and Co/SiO2 catalysts",
Catalysis Letters, Vol. 63, p. 135, 1999.
[21] Alvin, S., "Catalyst Supports and Supported Catalysts Theoretical and
Applied Concepts"; Butterworths: London, 1987.
[22] Zhu, J., Yudasaka, M., and Iijima, S., "A catalytic chemical vapour
deposition synthesis of double-walled carbon nanotubes over metal
catalysts supported on a mesoporous material", Chemical Physics
Letters, Vol. 380, p. 496, 2003.
[23] Su, M., Zheng, B., and Liu, J., "A scalable CVD method for the
synthesis of single-walled carbon nanotubes with high catalyst
productivity", Chemical Physics Letters, Vol. 322, p. 321, 2000:.
[24] Hernadi, K., Konya, Z., Siska, A., Kiss, J., Oszko, A., Nagy, J.B., and
Kiricsi, I., "On the role of catalyst, catalyst support and their interaction
in synthesis of carbon nanotubes by CCVD", Materials Chemistry and
Physics, Vol. 77, p. 536, 2002.
[25] Ward, J.W., Wei, B.Q., and Ajayan, P.M., "Substrate effects on the
growth of carbon nanotubes by thermal decomposition of methane."
Chemical Physics Letters, Vol. 376, p. 717, 2003.
[26] Sinha, A.K., Hwang, D.W., and Hwang, L.-P., "A novel approach to
bulk synthesis of carbon nanotubes filled with metal by a catalytic
chemical vapour deposition method", Chemical Physics Letters, Vol.
332, p. 455, 2000.
[27] Colomer, J.-F., Bister, G., Willems, I., Konya, Z., Fonseca, A., Van
Tendeloo, G., and Nagy, J.B., "Synthesis of single-wall carbon
nanotubes by catalytic decompositions of hydrocarbons", Chemical
Communications, Issue 14, p 1343, 1999.
[28] Flahaut, E., Govindaraj, A., Peigney, A., Laurent, Ch., Rousset, A., and
Rao, C.N.R., "Synthesis of single-walled carbon nanotubes using binary
(Fe, Co, Ni) alloy nanoparticles prepared in situ by the reduction of
oxide solid solutions", Chemical Physics Letters, Vol. 300, p. 236, 1999.
[29] Chen, M., Chen, C.-M., Koo, H.-S., and Chen, C.-F., "Catalyzed growth
model of carbon nanotubes by microwave plasma chemical vapor
deposition using CH4 and CO2 gas mixtures", Diamond and Related
Materials, Vol. 12, p. 1829, 2003.
[30] Esconjauregui, S., Whelan, C. M., and Maex, C., "The reasons why
metals catalyze the nucleation and growth of carbon nanotubes and other
carbon nanostructures", Carbon, Vol. 47, Issue 3, pp. 659-669, 2009.
[31] Curran, S., Carroll, D.L., Ajayan, P.M., Redlich, P., Roth, S., R├╝hle, M.,
Blau, W., "Picking Needles from the Nanotube-haystack" Advanced
Materials, Vol. 10, Issue 14, p. 1091, 1998.
[32] Athalin, H., Lefrant, S., "A correlated method for quantifying mixed and
dispersed carbon nanotubes: analysis of the Raman band intensities and
evidence of wavenumber shift.", Journal of Raman Spectroscopy, Vol.
36, p. 40, 2005:.
[33] Mauron, P., "Growth mechanism and structure of carbon nanotubes",
Dissertation, Hansdruckerei Universitat Freiburg, 2003.
[34] Montgomery, D.C., "Design and Analysis of Experiments", Third
Edition, pp. 278-288, 1991.