Mercury Removing Capacity of Multiwall Carbon Nanotubes as Detected by Cold Vapor Atomic Absorption Spectroscopy: Kinetic & Equilibrium Studies

Multiwall carbon nanotubes, prepared by chemical
vapor deposition, have an average diameter of 60-100 nm as shown
by High Resolution Transmittance Electron Microscope, HR-TEM.
The Multiwall carbon nanotubes (MWCNTs) were further
characterized using X-ray Diffraction and Raman Spectroscopy.
Mercury uptake capacity of MWCNTs was studied using batch
adsorption method at different concentration ranges up to 150 ppm.
Mercury concentration (before and after the treatment) was measured
using cold vapor atomic absorption spectroscopy. The effect of time,
concentration, pH and adsorbent dose were studied. MWCNT were
found to perform complete absorption in the sub-ppm concentrations
(parts per billion levels) while for high concentrations, the adsorption
efficiency was 92% at the optimum conditions; 0.1 g of the adsorbent
at 150 ppm mercury (II) solution. The adsorption of mercury on
MWCNTs was found to follow the Freundlich adsorption isotherm
and the pseudo-second order kinetic model.





References:
[1] S. Bernard, a Enayati, L. Redwood, H. Roger, and T. Binstock, “Autism:
a novel form of mercury poisoning.,” Med. Hypotheses, vol. 56, no. 4,
pp. 462–71, Apr. 2001.
[2] “U.S. EPA, Mercury Study Report to Congress, EPA 452, Executive
Summary, EPA OAQPS/ORD, 1997, pp. R97–R105.”
[3] W. F. Fitzgerald, D. R. Engstrom, R. P. Mason, and E. A. Nater, “The
case for atmospheric mercury contamination in remote areas,” Environ.
Sci. Technol., vol. 32, no. 1, pp. 1–7, 1998.
[4] P. L. Bidstrup, “Toxicity of Mercury and its Compounds.” Toxic.
Mercur. its Compd., 1964.
[5] K. Kadirvelu, M. Kavipriya, C. Karthika, N. Vennilamani, and S.
Pattabhi, “Mercury (II) adsorption by activated carbon made from sago
waste,” Carbon, vol. 42, no. 4, pp. 745–752, 2004.
[6] “U.S. Environmental Protection Agency (EPA) and Environment
Canada. 1999. Update: Binational Toxics Strategy – Mercury Sources
and Regulations.”
[7] “U.S. EPA. 2005. Great Lakes Pollution Prevention and Toxics
Strategy. Background Information on Mercury Sources and
Regulations.”
[8] C. F. Forster and D. A. Wase, “Biosorbents for metal ions,” 1997.
[9] J. C. a. de Wuilloud, R. G. Wuilloud, R. a. Olsina, and L. D. Martinez,
“Separation and pre-concentration of inorganic and organo-mercury
species in water samples using a selective reagent and an anion
exchange resin and determination by flow injection-cold vapor atomic
absorption spectrometry,” J. Anal. At. Spectrom., vol. 17, no. 4, pp. 389–
394, Apr. 2002.
[10] J. L. Capelo, C. D. Dos Reis, C. Maduro, and a Mota, “Tandem focused
ultrasound (TFU) combined with fast furnace analysis as an improved
methodology for total mercury determination in human urine by
electrothermal-atomic absorption spectrometry” Talanta, vol. 64, no. 1,
pp. 217–23, Sep. 2004.
[11] D. P. Torres, M. A. Vieira, A. S. Ribeiro, and A. J. Curtius,
“Determination of inorganic and total mercury in biological samples
treated with tetramethylammonium hydroxide by cold vapor atomic
absorption spectrometry using different temperatures in the quartz cell,”
J. Anal. At. Spectrom., vol. 20, no. 4, pp. 289–294, 2005.
[12] B. Welz, “Atomic Absorption Spectrometry (2nd edn.) VCH,” New
York, p. 279, 1985.
[13] L. Malachowski, J. L. Stair, and J. A. Holcombe, “Immobilized
peptides/amino acids on solid supports for metal remediation,” Pure
Appl. Chem., vol. 76, no. 4, pp. 777–787, 2004.
[14] S. Dutta, A. Bhattacharyya, P. De, P. Ray, and S. Basu, “Removal of
mercury from its aqueous solution using charcoal-immobilized papain
(CIP).,”J. Hazard. Mater., vol. 172, no. 2–3. pp. 888–96, 30-Dec-2009.
[15] I. Ghodbane and O. Hamdaoui, “Removal of mercury (II) from aqueous
media using eucalyptus bark: kinetic and equilibrium studies,” J.
Hazard. Mater., vol. 160, no. 2, pp. 301–309, 2008.
[16] K. Anoop Krishnan and T. S. Anirudhan, “Removal of mercury(II) from
aqueous solutions and chlor-alkali industry effluent by steam activated
and sulphurised activated carbons prepared from bagasse pith: kinetics
and equilibrium studies.,” J. Hazard. Mater., vol. 92, no. 2, pp. 161–83,
May 2002.
[17] M. B. Lohani, A. Singh, D. C. Rupainwar, and D. N. Dhar, “Studies on
efficiency of guava (Psidiumguajava) bark as bioadsorbent for removal
of Hg (II) from aqueous solutions.,” J. Hazard. Mater., vol. 159, no. 2–
3, pp. 626–9, Nov. 2008.
[18] F. Di Natale, a Lancia, a Molino, M. Di Natale, D. Karatza, and D.
Musmarra, “Capture of mercury ions by natural and industrial
materials.,” J. Hazard. Mater., vol. 132, no. 2–3, pp. 220–5, May 2006.
[19] S. W. Al Rmalli, A. a Dahmani, M. M. Abuein, and A. a Gleza,
“Biosorption of mercury from aqueous solutions by powdered leaves of
castor tree (Ricinuscommunis L.),” J. Hazard. Mater., vol. 152, no. 3,
pp. 955–9, Apr. 2008.
[20] M. Velicu, H. Fu, R. P. S. Suri, and K. Woods, “Use of adsorption
process to remove organic mercury thimerosal from industrial process
wastewater.” J. Hazard. Mater.,vol. 148, no. 3. pp. 599–605, 30-Sep-
2007.
[21] T. Masciangioli and W. Zhang, “Environmental nanotechnology:
Potential and pitfalls,” Environ. Sci. Technol, vol. 37, p. 102A–108A,
2003.
[22] N. Savage and M. S. Diallo, “Nanomaterials and water purification:
opportunities and challenges,” J. Nanoparticle Res., vol. 7, no. 4–5, pp.
331–342, 2005.
[23] R. Saito, M. Fujita, G. Dresselhaus, and u M. S. Dresselhaus,
“Electronic structure of chiral graphene tubules,” Appl. Phys. Lett., vol.
60, no. 18, pp. 2204–2206, 1992.
[24] C. Dekker, “Carbon nanotubes as molecular quantum wires,” Phys.
Today, vol. 52, pp. 22–30, 1999.
[25] M. Meyyappan and D. Srivastava, “Carbon Nanotube: A Big Revolution
in a Technology that Thinks Very, Very, Very Small,” IEEE Potentials,
vol. 19, no. 3, pp. 16–18, 2000.
[26] C. P. Nanseu-Njiki, S. R. Tchamango, P. C. Ngom, A. Darchen, and E.
Ngameni, “Mercury (II) removal from water by electrocoagulation using
aluminium and iron electrodes,” J. Hazard. Mater., vol. 168, no. 2, pp.
1430–1436, 2009.
[27] Y.-H. Li, S. Wang, J. Wei, X. Zhang, C. Xu, Z. Luan, D. Wu, and B.
Wei, “Lead adsorption on carbon nanotubes,” Chem. Phys. Lett., vol.
357, no. 3–4, pp. 263–266, May 2002.
[28] J. Li, S. Chen, G. Sheng, J. Hu, X. Tan, and X. Wang, “Effect of
surfactants on Pb(II) adsorption from aqueous solutions using oxidized
multiwall carbon nanotubes,” Chem. Eng. J., vol. 166, no. 2, pp. 551–
558, Jan. 2011.
[29] Y.-H. Li, S. Wang, X. Zhang, J. Wei, C. Xu, Z. Luan, and D. Wu,
“Adsorption of fluoride from water by aligned carbon nanotubes,”
Mater. Res. Bull., vol. 38, no. 3, pp. 469–476, 2003.
[30] Y.-H. Li, S. Wang, Z. Luan, J. Ding, C. Xu, and D. Wu, “Adsorption of
cadmium (II) from aqueous solution by surface oxidized carbon
nanotubes,” Carbon N. Y., vol. 41, no. 5, pp. 1057–1062, 2003.
[31] C. Lu and H. Chiu, “Adsorption of zinc(II) from water with purified
carbon nanotubes,” Chem. Eng. Sci., vol. 61, no. 4, pp. 1138–1145, Feb.
2006.
[32] D. Shao, Z. Jiang, X. Wang, J. Li, and Y. Meng, “Plasma induced
grafting carboxymethyl cellulose on multiwalled carbon nanotubes for
the removal of UO2
2+ from aqueous solution,” J. Phys. Chem. B, vol.
113, no. 4, pp. 860–864, 2009.
[33] H. Chen, J. Li, D. Shao, X. Ren, and X. Wang, “Poly (acrylic acid)
grafted multiwall carbon nanotubes by plasma techniques for Co (II)
removal from aqueous solution,” Chem. Eng. J., vol. 210, pp. 475–481,
2012.
[34] C. L. Chen, X. K. Wang, and M. Nagatsu, “Europium Adsorption on
Multiwall Carbon Nanotube/Iron Oxide Magnetic Composite in the
Presence of Polyacrylic Acid,” Environ. Sci. Technol., vol. 43, no. 7, pp.
2362–2367, Feb. 2009.
[35] M. I. Kandah and J.-L. Meunier, “Removal of nickel ions from water by
multi-walled carbon nanotubes.,” J. Hazard. Mater., vol. 146, no. 1–2,
pp. 283–8, Jul. 2007.
[36] M. J. Shadbad, A. Mohebbi, and A. Soltani, “Mercury(II) removal from
aqueous solutions by adsorption on multi-walled carbon nanotubes,”
Korean J. Chem. Eng., vol. 28, no. 4, pp. 1029–1034, Mar. 2011.
[37] W. Li, C. Liang, W. Zhou, J. Qiu, Z. Zhou, G. Sun, and Q. Xin,
“Preparation and characterization of multiwalled carbon nanotube-supported platinum for cathode catalysts of direct methanol fuel cells,”
J. Phys. Chem. B, vol. 107, no. 26, pp. 6292–6299, 2003.
[38] I. Stamatin, A. Morozan, A. Dumitru, V. Ciupina, G. Prodan, J.
Niewolski, and H. Figiel, “The synthesis of multi-walled carbon
nanotubes (MWNTs) by catalytic pyrolysis of the phenol-formaldehyde
resins,” Phys. E Low-dimensional Syst. Nanostructures, vol. 37, no. 1,
pp. 44–48, 2007.
[39] L. Bokobza and J. Zhang, “Raman spectroscopic characterization of
multiwall carbon nanotubes and of composites.” Express Polym. Lett.,
vol. 6, no. 7, 2012.
[40] R. Leyva Ramos, L. A. Bernal Jacome, J. Mendoza Barron, L. Fuentes
Rubio, and R. M. Guerrero Coronado, “Adsorption of zinc (II) from an
aqueous solution onto activated carbon,” J. Hazard. Mater., vol. 90, no.
1, pp. 27–38, 2002.
[41] D. Mohan, V. K. Gupta, S. K. Srivastava, and S. Chander, “Kinetics of
mercury adsorption from wastewater using activated carbon derived
from fertilizer waste,” Colloids Surfaces A Physicochem. Eng. Asp., vol.
177, no. 2, pp. 169–181, 2000.
[42] M. Zabihi, A. Ahmadpour, and A. H. Asl, “Removal of mercury from
water by carbonaceous sorbents derived from walnut shell,” J. Hazard.
Mater., vol. 167, no. 1, pp. 230–236, 2009.
[43] C. Jeon and K. Ha Park, “Adsorption and desorption characteristics of
mercury (II) ions using aminated chitosan bead,” Water Res., vol. 39, no.
16, pp. 3938–3944, 2005.
[44] D. Tiwari, “Biomass-derived materials in the remediation of heavymetal
contaminated water: Removal of cadmium (II) and copper (II)
from aqueous solutions,” Water Environ. Res., vol. 83, no. 9, pp. 874–
881, 2011.
[45] F. J. Cerino-Córdova, A. M. García-León, E. Soto-Regalado, M. N.
Sánchez-González, T. Lozano-Ramírez, B. C. García-Avalos, and J. A.
Loredo-Medrano, “Experimental design for the optimization of copper
biosorption from aqueous solution by Aspergillus-terreus,” J. Environ.
Manage.,vol. 95, pp. S77–S82, 2012.
[46] N. Li and R. Bai, “Copper adsorption on chitosan–cellulose hydrogel
beads: behaviors and mechanisms,” Sep. Purif. Technol., vol. 42, no. 3,
pp. 237–247, 2005.
[47] I. Langmuir, “The adsorption of gases on plane surfaces of glass, mica
and platinum.,” J. Am. Chem. Soc., vol. 40, no. 9, pp. 1361–1403, 1918.
[48] F. H. Uber, “Die adsorption in losungen,” Z. Phys. Chem, vol. 57, pp.
387–470, 1985.
[49] M. I. Temkin and V. Pyzhev, “Kinetics of ammonia synthesis on
promoted iron catalysts,” Actaphysiochim. URSS, vol. 12, no. 3, pp.
217–222, 1940.
[50] M. M. Dubinin, E. D. Zaverina, and L. V Radushkevich, “Sorption and
structure of active carbons. I. Adsorption of organic vapors,”
ZhurnalFiz. Khimii, vol. 21, pp. 1351–1362, 1947.