Hydrothermal Treatment for Production of Aqueous Co-Product and Efficient Oil Extraction from Microalgae

Hydrothermal liquefaction (HTL) is a technique for obtaining clean biofuel from biomass in the presence of heat and pressure in an aqueous medium which leads to a decomposition of this biomass to the formation of various products. A role of operating conditions is essential for the bio-oil and other products’ yield and also quality of the products. The effects of these parameters were investigated in regards to the composition and yield of the products. Chlorellaceae microalgae were tested under different HTL conditions to clarify suitable conditions for extracting bio-oil together with value-added co-products. Firstly, different microalgae loading rates (5-30%) were tested and found that this parameter has not much significant to product yield. Therefore, 10% microalgae loading rate was selected as a proper economical solution for conditioned schedule at 250oC and 30 min-reaction time. Next, a range of temperature (210-290oC) was applied to verify the effects of each parameter by keeping the reaction time constant at 30 min. The results showed no linkage with the increase of the reaction temperature and some reactions occurred that lead to different product yields. Moreover, some nutrients found in the aqueous product are possible to be utilized for nutrient recovery.





References:
[1] Y. Zhang, “Biofuels from Agricultural Wastes and Byproducts:
Hydrothermal Liquefaction to Convert Biomass into Crude Oil,” Online
library, H. P. Blaschek, T. C. Ezeji, and J. Scheffran, Ed. Oxford: Wiley-
Blackwell, 2010, pp. 201-228.
[2] S. S. Toor, L. Rosendahl, and A. Rudolf, “Hydrothermal liquefaction of
biomass: A review of subcritical water technologies,” Energy J., vol. 36,
pp. 2328-2342, Mar. 2011.
[3] M. Brady et al., “Renewable diesel subcommittee of the WSDA technical
work group,” Renewable diesel technology, July 2007, pp. 11-13.
[4] IAPWS, “Aqueous System at Elevated Temperatures and Pressures:
Physical Chemistry in Water, Steam and Hydrothermal Solutions,” D. A.
Palmer, et al., Ed. Gaithersburg, MD: National Institute of Standards and
Technology, 2004.
[5] FAO, “Renewable biological systems for alternative sustainable energy
production: Oil production,” Agriculture and Consumer Protection: FAO
corporate document repository, Jan. 2013.
[6] L. C. Ming et al., “Identification and biochemical composition of a green
microalgae,” Biotechnology Asian J., vol. 4, no. 1, pp. 38-45, 2012.
[7] A. Demirbas, “Use of algae as biofuel sources,” Energy Conversion and
Management J., vol. 51, pp. 2738-2749, Jun 2010.
[8] D. R. Vardon, B. K. Sharman, G. V. Blaziba, K. Rajagopalan, and T. J.
Strathmann, “Thermochemical conversion of raw and defatted algal
biomass via hydrothermal liquefaction and slow pyrolysis,” Bioresource
Technology J., vol. 109, pp. 178-187, Jan. 2012.
[9] A. A. Peterson et al., “Thermochemical biofuel production in hydrothermal
media: a review of sub- and supercritical water technologies,” Energy and
Environmental Science J., vol. 1, pp. 32-65, 2011.
[10] D. R. Vardon et al., “Chemical properties of biocrude oil from
hydrothermal liquefaction of Spirulina algae, swine manure, and digested
anaerobic sludge,” Bioresource Technology J., vol. 102, pp. 8295-8303,
Jul. 2011.
[11] P. E. Savage, R. B. Levine, and C. M. Huelsman, “Thermochemical
conversion of biomass to liquid fuels and chemicals: Hydrothermal
processing of biomass,” M. Crocker Ed. Cambridge: RSC, 2010, pp. 192-
221.
[12] Y. H. Chen, B. Y. Huang, T. H. Chiang, and T. C. Tang, “Fuel properties
of microalgae (Chlorella protothecoides) oil biodiesel and its blends with
petroleum diesel,” Fuel J., vol. 94, pp. 270-273, Nov. 2012.
[13] M. F. Demirbas, “Biofuels from algae for sustainable development,”
Applied Energy J., vol. 88, pp. 3473-3480, Feb 2011.
[14] A. Demirbas, and M. F. Demirbas, “Importance of algae oil as a source of
biodiesel,” Energy Conversion and Management J., vol. 52, pp. 163-170,
Jul 2010.
[15] Y. Chisti, “Biodiesel from microalgae,” Biotechnology Advances J., vol.
25, pp. 294-306, Feb. 2007.
[16] A. Krasowska, S. Jablonski, P. Biniarz, M. Plachetka, and M.
Lukaszewicz, “Microalgae-Biodiesel potential producers: A review
(Proceedings),” Annu. Conf. AIIC Portugal, Apr. 2013.
[17] S. M. Heilmann et al., “Hydrothermal carbonization of microalgae II. Fatty
acid, char and algal nutrient products,” Applied Energy J., vol. 88, pp.
3286-3290, Jan. 2011.
[18] P. J. Valdez, M. C. Nelson, H. Y. Wang, X. N. Lin, and P. E. Savage,
“Hydrothermal liquefaction of Nannochloropsis sp.: Systematic study of
process variables and analysis of the product fractions,” Biomass and
Bioenergy J., vol. 46, pp. 317-331, Sep. 2012.
[19] D. Zhou, L. Zhang, S. Zhang, H. Fu, and J. Chen, “Hydrothermal
liquefaction of microalgae Enteromorpha prolifera to bio-oil,”
Energy&Fuels J., vol. 24, pp. 4054-4061, Nov. 2010.
[20] J. Akhtar, and N. A. S. Amin, “A review on process conditions for
optimum bio-oil yield in hydrothermal liquefaction of biomass,”
Renewable and Sustainable Energy Reviews J., vol. 15, pp. 1615-1624,
Jan. 2011.
[21] Y. C. Sharma, B. Singh, and J. Korstad, | igh yield and conversion of
biodiesel from a non-edible feedstock (Pongamia pinnata), Agricultural
and food chemistry J., vol. 58, pp. 242-247, Dec. 2009.
[22] T. M. Mata, A. A. Martins, and N. S. Caetano, “Microalgae for biodiesel
production and other applications: A review,” Renewable and Sustainable
Energy Reviews J., vol. 14, pp. 217-232, Jul. 2009.
[23] U. Jena, K. C. Das, and J. R. Kastner, “Effect of operating conditions
thermochemical liquefaction on biocrude production from Spirulina
platensis,” Bioresource Technology J., vol. 102, pp. 6221-6229, Feb. 2011.
[24] L. G. Alba et al., “Hydrothermal treatment (HTT) of microalgae:
Evaluation of the process as conversion method in an algae biorefinery
concept,” Energy&Fuels J., vol. 26, pp. 642-657, 2012.
[25] X. Z. Yuan, J. Y. Tong, G. M. Zeng, H. Li, and W. Xie, “Comparative
studies of products obtained at different temperatures during straw
liquefaction by hot compressed water,” Energy&Fuels J., vol. 23, pp.
3262-3267, 2009.
[26] R. Halim, M. K. Danquah, and P. A. Webly, “Extraction of oil from
microalgae for biodiesel production: A review,” Biotechnology Advances,
vol. 30, pp. 709-732, Jan. 2012.
[27] G. Yu, Y. Zhang, L. Schideman, T. Funk, and Z. Wang, “Distributions of
carbon and nitrogen in the products from hydrothermal liquefaction of low-lipid microalgae,” Energy Environ. Sci. J., vol. 4, pp. 4587-4595, Aug.
2011.
[28] U. Jena, N. Vaidyanathan, S. Chinnasamy, and K. C. Das, “Evaluation of
microalgae cultivation using recovered aqueous co-product from
thermochemical liquefaction of algae biomass,” Bioresources Technology
J., vol. 102, pp. 3380-3387, Oct. 2010.
[29] P. Biller et al., “Nutrient recycling of aqueous phase for microalgae
cultivation from the hydrothermal liquefaction process,” Algal Research J.,
vol. 1, pp. 70-76, Mar. 2012.
[30] M. Nelson et al., “Microbial utilization of aqueous co-products from
hydrothermal liquefaction of microalgae Nannochloropsis oculata,”
Bioresource Technology J., vol. 136, pp. 522-528, Mar. 2013.
[31] L. G. Alba, C. Torri, D. Fabbri, S. R. A. Kersten, and D. W. F. (W.)
Brilman, “Microalgae growth on the aqueous phase from hydrothermal
liquefaction of the same microalgae,” Chemical Engineering J., vol. 228,
pp. 214-223, May 2013.