Hydrodynamic Characteristics of Dry Beneficiation of Iron Ore and Coal in a Fast Fluidized Bed

Iron ore and coal are the two major important raw materials being used in Iron making industries. Usually ore fines containing around 5% Alumina are rejected due to higher proportion of alumina. Therefore, a technology or process which may reduce the alumina content by 2% by beneficiation process will be highly attractive . In addition fine coals with ash content is used nearly 12% is directly injected in blast furnace. Fast fluidization is a technology by using dry beneficiation of coal and iron ore can be done. During the fluidization process the iron ore band coal is fluidized at high velocity in the riser of a fast fluidized bed, the heavier and coarse particles is generally settled at the bottom in a dense zone of the riser while the finer and lighter particle are entrained to the top dilute zone and then via a cyclone is fed back to the bottom of the riser column. Most of the alumina and low ash fine size coals being lighter are expected to move up to the riser and by a natural beneficiation of ores is expected to take place in the riser. Therefore in this study an attempt has been made for dry beneficiation of iron ore and coal in a fluidized bed and its hydrodynamic characterization.




References:
[1] Q. Chen. , L. Wei , "Coal dry beneficiation technology in China: The
start-of-the-art" China Particuology, vol. 1, pp. 52-56, 2003.
[2] M. Das., B. C. Meikap, R. K. Saha, "Dry beneficiation of iron ore and
coal in a fast fluidized bed-a case study" Int. J. of Chem. Sci., vol. 5, pp.
1691-1700, 2007.
[3] N. C. Lockhart, "Dry beneficiation of Coal". Powder Technology, vol.
40, pp. 17-42, 1984.
[4] Z. Luo, Q. Chen, "Dry beneficiation technology of coal with an air dense
medium fluidized bed" , Int. J. of Min. Processing, vol. 63, pp.167-175,
2001.
[5] L. Zhenfu, J. Zhu, M. Fan, X. T. Zhao, "Low density dry coal
beneficiation using an Air dense medium fluidized bed" J. of China
University of Mining & Technology, vol. 17, pp. 306-309, 2007.
[6] M. Das., B. C. Meikap, R. K. Saha, "Characteristics of axial and radial
segregation of single and mixed particle system based on terminal
settling velocity in the riser of a circulating fluidized bed" Chem. Eng. J.
Journal, vol.145, pp. 32-43, 2008.
[7] M. Das., A. Bondopadhyay , R. K. Saha, " Axial voidage profiles and
identification of flow regimes in the riser of a circulating fluidized
bed" Chemical Engineering Journal, vol. 145, pp. 249-258, 2008.
[8] M. Das., B. C. Meikap, R. K. Saha " Voidage and pressure profile
characteristics of sand- iron ore -coal-FCC single particle systems in the
riser of a pilot plant circulating fluidized bed" Ind. & Eng. Chem.
Res., vol. I47 pp. 4018-4024 , 2008.