Effect of Environmental Conditions on Energy Efficiency of AAC-based Building Envelopes
Calculations of energy efficiency of several AACbased
building envelopes under different climatic conditions are
presented. As thermal insulating materials, expanded polystyrene and
hydrophobic and hydrophilic mineral wools are assumed. The
computations are accomplished using computer code HEMOT
developed at Department of Materials Engineering, Faculty of Civil
Engineering at the Czech Technical University in Prague. The
climatic data of Athens, Kazan, Oslo, Prague and Reykjavík are
obtained using METEONORM software.
[1] D. Chwieduk, Towards, "Sustainable-energy buildings," Applied
Energy, vol. 76, no. 1-3, pp. 211-217, 2003
[2] EuroACE, Towards Energy Efficient Buildings in Europe, final report
June (ec.europa.eu), 2004.
[3] I.B. Topcu, T. Uygunoglu, "Properties of autoclaved lightweight
aggregate concrete," Building and Environment, vol. 42, no. 12, Indoor
Air 2005 Conference, pp. 4108-4116, 2007.
[4] M. Jerman,V. Ko─ì├¡, J. Mad─øra, J. V├¢born├¢, R. ─îern├¢, "Water and heat
transport parameters of materials involved in AAC-based building
envelopes," in 1st Central European Symposium on Building Physics.
Lodz: Technical University of Lodz, 2010, pp. 39-45
[5] X.C. Qiao, B.R. Ng, M. Tyrer, C.S. Poon, C.R. Cheeseman, "Production
of lightweight concrete using incinerator bottom ash," Construction and
Building Materials, vol. 4, pp. 473-480, 2008.
[6] H. Kurama, I.B. Topcu, C. Karakurt, "Properties of the autoclaved
aerated concrete produced from coal bottom ash," Journal of Materials
Processing Technology, vol. 2, pp. 767-773, 2009.
[7] W. Wongkeo, A. Chaipanich, "Compressive strength, microstructure and
thermal analysis of autoclaved and air cured structural lightweight
concrete made with coal bottom ash and silica fume," Materials Science
and Engineering, vol. 16-17, pp. 3676-3684, 2010.
[8] E. Holt, P. Raivio, "Use of gasification residues in aerated autoclaved
concrete", Cement and Concrete Research vol. 4, pp. 796-802, 2005.
[9] M.S. Goual, A. Bali, F. de Barquin, R.M. Dheilly, M. Queneudec,
"Isothermal moisture properties of Clayey Cellular Concretes elaborated
from clayey waste, cement and aluminium powder," Cement and
Concrete Research, vol. 9, pp. 1768-1776, 2006.
[10] A. Hauser, U. Eggenberger, T. Mumenthaler, "Fly ash from cellulose
industry as secondary raw material in autoclaved aerated concrete,"
Cement and Concrete Research, vol. 3, pp. 297-302, 2009.
[11] CSN 73 0540-2 Thermal protection of buildings - part 2: Requirements,
Czech Office for Standards, Metrology and Testing, Prague, 2007
[12] Approved Document L1A: Conservation of Fuel and Power in New
Dwellings, London: RIBA Enterprises, 2010.
[13] H.M. Kuenzel, Simultaneous Heat and Moisture Transport in Building
Components, Ph. D. Thesis. IRB Verlag, Stuttgart, 1995.
[14] R. ČernÛ, Complex System of Methods for Directed Design and
Assessment of Functional Properties of Building Materials: Assessment
and Synthesis of Analytical Data and Construction of the System, CTU
Prague, 2010.
[15] J. Kruis, T. Koudelka, T. Krejčí, "Efficient computer implementation of
coupled hydro-thermo-mechanical analysis," Mathematics and
Computers in Simulation, vol. 80, pp. 1578-1588, 2010.
[16] Grunewald, J. DELPHIN 4.1 - Documentation, Theoretical
Fundamentals, TU Dresden, Dresden. 2000.
[17] M. Jiři─ìkov├í, R. ─îern├¢, "Effect of Hydrophilic Admixtures on Moisture
and Heat Transport and Storage Parameters of Mineral Wool,"
Construction and Building Materials, vol. 20, pp. 425-434, 2006.
[18] M. Jerman, J. Mad─øra, R. ─îern├¢, "Computational Modeling of Heat and
Moisture Transport in a Building Envelope with Hydrophilic Mineral
Wool Insulation, in Proc. of the 8th Symposium on Building Physics in
the Nordic Countries. Lyngby: Technical University of Denmark,
BYG.DTU, pp. 449-456, 2008.
[19] V. Kočí, J. VÛbornÛ, R. ČernÛ, "Computational and Experimental
Characterization of Building Envelopes Based on Autoclaved Aerated
Concrete," Materials Characterization V Computational Methods and
Experiments, A.A. Mammoli, C.A. Brebbia, A. Klemm (eds.).
Southampton: WIT Press, 2011, pp. 363-373.
[1] D. Chwieduk, Towards, "Sustainable-energy buildings," Applied
Energy, vol. 76, no. 1-3, pp. 211-217, 2003
[2] EuroACE, Towards Energy Efficient Buildings in Europe, final report
June (ec.europa.eu), 2004.
[3] I.B. Topcu, T. Uygunoglu, "Properties of autoclaved lightweight
aggregate concrete," Building and Environment, vol. 42, no. 12, Indoor
Air 2005 Conference, pp. 4108-4116, 2007.
[4] M. Jerman,V. Ko─ì├¡, J. Mad─øra, J. V├¢born├¢, R. ─îern├¢, "Water and heat
transport parameters of materials involved in AAC-based building
envelopes," in 1st Central European Symposium on Building Physics.
Lodz: Technical University of Lodz, 2010, pp. 39-45
[5] X.C. Qiao, B.R. Ng, M. Tyrer, C.S. Poon, C.R. Cheeseman, "Production
of lightweight concrete using incinerator bottom ash," Construction and
Building Materials, vol. 4, pp. 473-480, 2008.
[6] H. Kurama, I.B. Topcu, C. Karakurt, "Properties of the autoclaved
aerated concrete produced from coal bottom ash," Journal of Materials
Processing Technology, vol. 2, pp. 767-773, 2009.
[7] W. Wongkeo, A. Chaipanich, "Compressive strength, microstructure and
thermal analysis of autoclaved and air cured structural lightweight
concrete made with coal bottom ash and silica fume," Materials Science
and Engineering, vol. 16-17, pp. 3676-3684, 2010.
[8] E. Holt, P. Raivio, "Use of gasification residues in aerated autoclaved
concrete", Cement and Concrete Research vol. 4, pp. 796-802, 2005.
[9] M.S. Goual, A. Bali, F. de Barquin, R.M. Dheilly, M. Queneudec,
"Isothermal moisture properties of Clayey Cellular Concretes elaborated
from clayey waste, cement and aluminium powder," Cement and
Concrete Research, vol. 9, pp. 1768-1776, 2006.
[10] A. Hauser, U. Eggenberger, T. Mumenthaler, "Fly ash from cellulose
industry as secondary raw material in autoclaved aerated concrete,"
Cement and Concrete Research, vol. 3, pp. 297-302, 2009.
[11] CSN 73 0540-2 Thermal protection of buildings - part 2: Requirements,
Czech Office for Standards, Metrology and Testing, Prague, 2007
[12] Approved Document L1A: Conservation of Fuel and Power in New
Dwellings, London: RIBA Enterprises, 2010.
[13] H.M. Kuenzel, Simultaneous Heat and Moisture Transport in Building
Components, Ph. D. Thesis. IRB Verlag, Stuttgart, 1995.
[14] R. ČernÛ, Complex System of Methods for Directed Design and
Assessment of Functional Properties of Building Materials: Assessment
and Synthesis of Analytical Data and Construction of the System, CTU
Prague, 2010.
[15] J. Kruis, T. Koudelka, T. Krejčí, "Efficient computer implementation of
coupled hydro-thermo-mechanical analysis," Mathematics and
Computers in Simulation, vol. 80, pp. 1578-1588, 2010.
[16] Grunewald, J. DELPHIN 4.1 - Documentation, Theoretical
Fundamentals, TU Dresden, Dresden. 2000.
[17] M. Jiři─ìkov├í, R. ─îern├¢, "Effect of Hydrophilic Admixtures on Moisture
and Heat Transport and Storage Parameters of Mineral Wool,"
Construction and Building Materials, vol. 20, pp. 425-434, 2006.
[18] M. Jerman, J. Mad─øra, R. ─îern├¢, "Computational Modeling of Heat and
Moisture Transport in a Building Envelope with Hydrophilic Mineral
Wool Insulation, in Proc. of the 8th Symposium on Building Physics in
the Nordic Countries. Lyngby: Technical University of Denmark,
BYG.DTU, pp. 449-456, 2008.
[19] V. Kočí, J. VÛbornÛ, R. ČernÛ, "Computational and Experimental
Characterization of Building Envelopes Based on Autoclaved Aerated
Concrete," Materials Characterization V Computational Methods and
Experiments, A.A. Mammoli, C.A. Brebbia, A. Klemm (eds.).
Southampton: WIT Press, 2011, pp. 363-373.
@article{"International Journal of Chemical, Materials and Biomolecular Sciences:62957", author = "V. Koci and J. Madera and R. Cerny", title = "Effect of Environmental Conditions on Energy Efficiency of AAC-based Building Envelopes", abstract = "Calculations of energy efficiency of several AACbased
building envelopes under different climatic conditions are
presented. As thermal insulating materials, expanded polystyrene and
hydrophobic and hydrophilic mineral wools are assumed. The
computations are accomplished using computer code HEMOT
developed at Department of Materials Engineering, Faculty of Civil
Engineering at the Czech Technical University in Prague. The
climatic data of Athens, Kazan, Oslo, Prague and Reykjavík are
obtained using METEONORM software.", keywords = "climatic conditions, computational simulation,
energy efficiency, thermal insulation", volume = "6", number = "1", pages = "127-6", }