Development and Characterization of Bio-Tribological, Nano-Multilayer Coatings for Medical Tools Application

Development of new generation bio-tribological, multilayer coatings opens an avenue for fabrication of future hightech functional surfaces. In the presented work, nano-composite, Cr/CrN+[Cr/ a-C:H implanted by metallic nanocrystals] multilayer coatings have been developed for surface protection of medical tools. Thin films were fabricated by a hybrid Pulsed Laser Deposition technique. Complex microstructure analysis of nanomultilayer coatings, subjected to mechanical and biological tests, were performed by means of transmission electron microscopy (TEM). Microstructure characterization revealed the layered arrangement of Cr23C6 nanoparticles in multilayer structure. Influence of deposition conditions on bio-tribological properties of the coatings was studied. The bio-tests were used as a screening tool for the analyzed nanomultilayer coatings before they could be deposited on medical tools. Bio-medical tests were done using fibroblasts. The mechanical properties of the coatings were investigated by means of a ball-ondisc mechanical test. The micro hardness was done using Berkovich indenter. The scratch adhesion test was done using Rockwell indenter. From the bio-tribological point of view, the optimal properties had the C106_1 material.

Authors:

• L. Major
• J. M. Lackner
• M. Dyner
• B. Major

Keywords:

• Bio-tribological coatings
• cell-material interaction
• hybrid PLD
• tribology.

References:

[1] P. T. Martin, “Introduction to Surface Engineering and Functionally
Engineered Materials”, Copyright by Scrivener Publishing,
Co-published by John Wiley & Sons; ISBN 978-0-470-63927-6; 2011
[2] Y. Brechet, J.D. Embury, “Architectured materials: expanding materials
space”, Scripta Materialia 2013; 68: 1-3
[3] Q. Yang, L.R. Zhao, “Characterization of nano-layered multilayer
coatings using modified Bragg law”, Materials Characterization 2008;
59: 1285-1291
[4] J. M. Lackner, L. Major, M. Kot, “Microscale interpretation of
tribological phenomena in Ti/TiN soft-hard multilayer coatings on soft
austenite steel substrates”, Bulletin of the Polish Academy of Sciences-
Technical Sciences 2011; vol.59; No. 3: 343-355
[5] M. Kot, L. Major, J.M. Lackner, “Tribological phenomena of new kind
of multilayer coatings TiN/a-C:H”, Materials and Design 2013; 51: 280–
286
[6] J.M. Lackner, W. Waldhauser, B. Major, L. Major, M. Kot, “Plastic
deformation in nano-scale multilayer materials-A biomimetic approach
based on nacre”, Thin Solid Films 2013; 534: 417–425
[7] L. Major, J.M. Lackner, B. Major, “Bio-tribological TiN/Ti/a-C:H
multilayer coatings development with built-in mechanism of controlled
wear”, RSC Advances 2014; 4: 21108-21114
[8] P. Goodhew, NanoToday ISSN:1748 0132, Elsevier; 1: 40- 43; 2006
[9] L. Major, M. Janusz, M. Kot, J.M. Lackner and B. Major, “Development
and complex characterization of biotribological Cr/CrN + a-C:H (doped
Cr) nanomultilayer protective coatings for carbon–fiber-composite
materials”, RSC Advances 2015; 5: 9405–9415
[10] J.M. Lackner, “Industrially-Scalled Large-Area and High-Rate
Tribological Coatings by Pulsed Laser Deposition”, Surf. & Coat.
Technol. 2005; 200: 1439-1444
[11] R. Major, F. Bruckert, J.M. Lackner, W. Waldhauser, M. Pietrzyk, B.
Major, “Kinetics of eukaryote cells adhesion under shear flow
detachment on the PLD deposited surfaces”, Bulletin of the Polish
Academy of Sciences, Technical Sciences 2008; 56: 223-228
[12] G. Van Tendeloo, D. Van Dyck, S.J. Pennycook, Handbook of
Nanoscopy; Wiley-VCH Verlag& Co. ISBN: 978-3-527-31706-6; 2012
[13] C. Friedrich, R. Gadow, M. Speicher, “Protective multilayer coatings for
carbon-carbon composites”, Surface & Coatings Technology 2002; 151-
152: 405-411
[14] J. Romero, J. Esteve, A. Lousa, “Period dependence of hardness and
microstructure on nanometric Cr/CrN multilayers”, Surface & Coatings
Technology 2004; 188-189: 338-343
[15] C. Friedrich, R. Gadow, M. Speicher, “Protective multilayer coatings for
carbon-carbon composites” , Surface & Coatings Technology 2002; 151-
152: 405-411
[16] Q. Wang, F. Zhou, X. Ding, Z. Zhou, C. Wang, W. Zhang, L.K.-Y. Li,
S.-T. Lee, “Structure and water-lubricated tribological properties of Cr/a-C coatings with different Cr content”, Tribology International
2013; 67: 104-115
[17] K. Yamamoto, K. Matsukado, “Effect of hydrogenated DLC coating
hardness on the tribological properties under water lubrication”,
Tribology International 2006; 14: 1609-1614
[18] A.L. Bowman, G.P. Arnold, E.K. Storms, N.G. Nereson, “The Crystal
Structure of Cr23C6”, ActaCrystallographica B 1972; 28: 3102-3103
[19] J.Y. Wong, J.D. Bronzino Biomaterials, Taylor &Francis Group ISBN-
10: 0-8493-7888-5; 2007
[20] A. Czyzniewski, “Mechanical and Tribological Properties of Cr-DLC
Coatings Deposited by ARC-MAG-RF PACVD Hybrid Method”,
Plasma Process and Polymers 2007; 4: 225–230