A Structural and Magnetic Investigation of the Inversion Degree in Spinel NiFe2O4, ZnFe2O4 and Ni0.5Zn0.5Fe2O4 Ferrites Prepared by Soft Mechanochemical Synthesis

NiFe2O4 (nickel ferrite), ZnFe2O4 (zinc ferrite) and Ni0.5Zn0.5Fe2O4 (nickel-zinc ferrite) were prepared by mechanochemical route in a planetary ball mill starting from mixture of the appropriate quantities of the Ni(OH)2/Fe(OH)3, Zn(OH)2/Fe(OH)3 and Ni(OH)2/Zn(OH)2/Fe(OH)3 hydroxide powders. In order to monitor the progress of chemical reaction and confirm phase formation, powder samples obtained after 25 h, 18 h and 10 h of milling were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), IR, Raman and Mössbauer spectroscopy. It is shown that the soft mechanochemical method, i.e. mechanochemical activation of hydroxides, produces high quality single phase ferrite samples in much more efficient way. From the IR spectroscopy of single phase samples it is obvious that energy of modes depends on the ratio of cations. It is obvious that all samples have more than 5 Raman active modes predicted by group theory in the normal spinel structure. Deconvolution of measured spectra allows one to conclude that all complex bands in the spectra are made of individual peaks with the intensities that vary from spectrum to spectrum. The deconvolution of Raman spectra allows to separate contributions of different cations to a particular type of vibration and to estimate the degree of inversion.

Authors:

• Z. Ž. Lazarević
• D. L. Sekulić
• V. N. Ivanovski
• N. Ž. Romčević

Keywords:

• Ferrites
• Raman spectroscopy
• IR spectroscopy
• Mössbauer measurements.

References:

[1] M. Mohapatra, and S. Anand, “Synthesis and applications of nanostructured
iron oxides/hydroxides – a review,” International Journal of
Engineering, Science and Technology, vol. 2, no. 8, pp. 127–146, Xxx.
2010, www.ijest-ng.com.
[2] A. R. Tanna, and H. H. Joshi, “Computer aided X-ray diffraction
intensity analysis for spinels: hands-on computing experience,” World
Academy of Science, Engineering and Technology, vol. 7, no.3, pp. 70–
77, 2013.
[3] W. H. Bragg, “The structure of magnetite and the spinels” Nature, Lond.
vol. 95, pp. 561, 1915.
[4] Q. Liu, L. Lv, J. P. Zhou, X. M. Chen, X. B. Bian, and P. Liu, “Influence
of nickel-zinc ratio on microstructure, magnetic and dielectric properties
of Ni(1−x)ZnxFe2O4 ferrites,” Journal of Ceramic Processing Research,
vol. 13, no. 2, pp. 110–116, 2012.
[5] Č. Jovalekić, M. Zdujić, A. Radaković, and M. Mitrić,
“Mechanochemical synthesis of NiFe2O4 ferrite,” Materials Letters, vol.
24, no.6, pp. 365–368, 1995.
[6] C. N. Chinnasamy, A. Narayanasamy, N. Ponpandian, K.
Chattopadhyay, H. Guerault, and J. M. Greneche, “Ferrimagnetic
ordering in nanostructured zinc ferrite,” Scripta Materialia, vol. 44, no.
8–9, pp. 1407–1410, 2001.
[7] M. Jalaly, M. H. Enayati, and F. Karimzadeh, “Investigation of
structural and magnetic properties of nanocrystalline Ni0.3Zn0.7Fe2O4
prepared by high energy ball milling,” Journal of Alloys and
Compounds, vol. 480, pp. 737–740, 2009.
[8] K. Maaz, A. Mumtaz, S. K. Hasanain, and M. F. Bertino, “Temperature
dependent coercivity and magnetization of nickel ferrite nanoparticles,”
Journal of Magnetism and Magnetic Materials, vol. 322, no.15, pp.
2199–2202, 2010.
[9] P. Sivakumar, R. Ramesh, A. Ramanand, S. Ponnusamy, and C.
Muthamizhchelvan, “Synthesis and characterization of NiFe2O4
nanosheet via polymer assisted co-precipitation method,” Materials
Letters, vol. 65, no. 3, pp. 483–485, 2011. [10] E. Manova, D. Paneva, B. Kunev, E. Rivière, C. Estournès, and I. Mitov,
“Characterization of nanodimensional Ni-Zn ferrite prepared by
mechanochemical and thermal methods,” Journal of Physics:
Conference Series, vol. 217, no. 1, pp. 012102, 2010, doi:10.1088/1742-
6596/217/1/012102.
[11] K. Suresh, and K. C. Patil, “Preparation and properties of fine particle
nickel-zinc ferrites: A comparative study of combustion and precursor
methods,” Journal of Solid State Chemistry, vol. 99, no. 1, pp. 12–17,
1992.
[12] A. Verma, T. C. Goel, and R. G. Mendiratta, “Low temperature
processing of NiZn ferrite by citrate precursor method and study of
properties,” Materials Science and Technology, vol. 16, pp. 712–715,
2000.
[13] K. R. Krishna, K. V. Kumar, C. Ravindernath Gupta, and D. Ravinder,
“Magnetic properties of Ni-Zn ferrites by citrate gel method,” Advances
in Materials Physics and Chemistry, vol. 2, no. 3, pp. 149–154, 2012,
http://dx.doi.org/10.4236/ampc.2012.23022.
[14] A. T. Raghavender, K. Zadro, D. Pajic, Z. Skoko, and N. Biliskov,
“Effect of grain size on the Néel temperature of nanocrystalline nickel
ferrite,” Materials Letters, vol. 64, no. 10, pp. 1144–1146, 2010.
[15] H. E. Zhang, B. F. Zhang, G. F. Wang, X. H. Dong, and Y. Gao, “The
structure and magnetic properties of Zn1-xNixFe2O4 ferrite nanoparticles
prepared by sol–gel auto-combustion,” Journal of Magnetism and
Magnetic Materials, vol. 312, pp. 126–130, 2007.
[16] A. T. Raghavender, N. Biliškov, and Ž. Skoko, “XRD and IR analysis of
nanocrystalline Ni–Zn ferrite synthesized by the sol–gel method,”
Materials Letters, vol. 65, pp. 677–680, 2011.
[17] E. Avvakumov, M. Senna, and N. Kosova, Soft Mechanochemical
Synthesis: A Basis for New Chemical Technologies, Kluwer Academic
Publishers, Boston, 2001.
[18] Z. Ž. Lazarević, Č. Jovalekić, A. Rečnik, V. N. Ivanovski, A.
Milutinović, M. Romčević, M. B. Pavlović, B. Cekić, and N. Ž.
Romčević, “Preparation and characterization of spinel nickel ferrite
obtained by the soft mechanochemically assisted synthesis,” Materials
Research Bulletin, vol. 48, pp. 404–415 , 2013.
[19] R. A. Brand, WinNormos Mössbauer fitting program, Universität
Duisburg, 2008.
[20] Ivanov, M. V. Abrashev, M. N. Iliev, M. M. Gospodinov, J. Meen, and
M. I. Aroyo, “Short-range B-site ordering in the inverse spinel ferrite
NiFe2O4,” Physical Review B, vol. 82, pp. 024104, 2010,
http://dx.doi.org/10.1103/PhysRevB.82.024104.
[21] Z. Ž. Lazarević, Č. Jovalekić, A. Milutinović, D. Sekulić, V. N.
Ivanovski, A. Rečnik, B. Cekić, and N. Z. Romčević, “Nanodimensional
spinel NiFe2O4 and ZnFe2O4 ferrites prepared by soft mechanochemical
synthesis,” Journal of Applied Physics, vol. 113, pp. 187221, 2013.
[22] Z. W. Wang, P. Lazor, S. K. Saxena, and G. Artioli, “High-pressure
Raman spectroscopic study of spinel (ZnCr2O4),” Journal of Solid State
Chemistry, vol. 165, 165–170, 2002.
[23] M. Maletin, E. G. Moshopoulou, A. G. Kontos, E. Devlin, A. Delimitis,
V. T. Zaspalis, L. Nalbandian, and V. V. Srdić, “Synthesis and structural
characterization of In-doped ZnFe2O4 nanoparticles,” Journal of the
European Ceramic Society, vol. 27, pp. 4391–4394, 2007.
[24] A. Milutinović, Z. Ž. Lazarević, Č. Jovalekić, I. Kuryliszyn-Kudelska,
M. Romčević, S. Kostic, and N. Ž. Romčević, “The cation inversion and
magnetization in nanopowder zinc ferrite obtained by soft
mechanochemical processing,” Materials Research Bulletin, vol. 48, pp.
4759–4768, 2013.
[25] O. N. Shebanova, and P. Lazor, “Raman study of magnetite (Fe3O4):
laser-induced thermal effects and oxidation,” Journal of Raman
Spectroscopy, vol. 34, pp. 845–852, 2003.
[26] A. Ahlawat, and V. G. Sathe, “Raman study of NiFe2O4 nanoparticles,
bulk and films: effect of laser power,” Journal of Raman Spectroscopy,
vol. 42, pp. 1087–1094, 2011.
[27] Ž. Cvejić, S. Rakić, A. Kremenović, B. Antić, Č. Jovalekić, and P.
Colomban, “Nanosize ferrites obtained by ball milling: crystal structure,
cation distribution, size-strain analysis and Raman investigations,” Solid
State Sciences, vol. 8, no. 8, pp. 908–915, 2006.
[28] N. N. Greenwood, and T. C. Gibb, Mössbauer Spectroscopy, Chapman
and Hall Ltd., London, pp. 266–267, 1971.
[29] V. Šepelák, D. Baabe, and K. D. Becker, “Mechanically induced cation
redistribution and spin canting in nickel ferrite,” Journal of Materials
Synthesis and Processing, vol. 8, no. 5-6, pp. 333–337 (2000).
[30] G. A. Sawatzky, F. Van der Woude, and A. H. Morrish, “Mössbauer
study of several ferrimagnetic spinel,” Physical Review, vol. 187, no.2,
747–757, 1969.