Abstract: In this work, statistical experimental design was
applied for the optimization of medium constituents for Gentamicin
production by Micromsonospora echinospora subs pallida (MTCC
708) in a batch reactor and the results are compared with the ANN
predicted values. By central composite design, 50 experiments are
carried out for five test variables: Starch, Soya bean meal, K2HPO4,
CaCO3 and FeSO4. The optimum condition was found to be: Starch
(8.9,g/L), Soya bean meal (3.3 g/L), K2HPO4 (0.8 g/L), CaCO3 (4
g/L) and FeSO4 (0.03 g/L). At these optimized conditions, the yield
of gentamicin was found to be 1020 mg/L. The R2 values were found
to be 1 for ANN training set, 0.9953 for ANN test set, and 0.9286 for
RSM.
Abstract: Use of the Internet and the World-Wide-Web
(WWW) has become widespread in recent years and mobile agent
technology has proliferated at an equally rapid rate. In this scenario
load balancing becomes important for P2P systems. Beside P2P
systems can be highly heterogeneous, i.e., they may consists of peers
that range from old desktops to powerful servers connected to
internet through high-bandwidth lines. There are various loads
balancing policies came into picture. Primitive one is Message
Passing Interface (MPI). Its wide availability and portability make it
an attractive choice; however the communication requirements are
sometimes inefficient when implementing the primitives provided by
MPI. In this scenario we use the concept of mobile agent because
Mobile agent (MA) based approach have the merits of high
flexibility, efficiency, low network traffic, less communication
latency as well as highly asynchronous. In this study we present
decentralized load balancing scheme using mobile agent technology
in which when a node is overloaded, task migrates to less utilized
nodes so as to share the workload. However, the decision of which
nodes receive migrating task is made in real-time by defining certain
load balancing policies. These policies are executed on PMADE (A
Platform for Mobile Agent Distribution and Execution) in
decentralized manner using JuxtaNet and various load balancing
metrics are discussed.
Abstract: This paper presents an overview of current municipal
solid waste management in Khoram Abad city.
According to data collected by the local authorities, the waste
generation rate is estimated to be 800 g/cap.d with density of 243
kg/m3. Solid waste is stored in different types of containers at the
source of generation in different areas of the city.
Local Authority is responsible for waste collection, transportation.
Municipality is responsible for waste collection, using private sector
contracts.
At present, both mechanical and manual methods are used to
collect residential waste. Manual methods of collection are the most
commonly used for waste collection in most parts of the city.
Land filling is the main disposal method in this city. But it has
some obvious problem and deficiencies
The current state of solid waste management has been improved
slightly in the last decade. By more actions can reduce the human and
environmental risks.
Abstract: This paper examines the modeling and analysis of a
cruise control system using a Petri net based approach, task graphs,
invariant analysis and behavioral properties. It shows how the
structures used can be verified and optimized.
Abstract: Tandem mass spectrometry (MS/MS) is the engine
driving high-throughput protein identification. Protein mixtures possibly
representing thousands of proteins from multiple species are
treated with proteolytic enzymes, cutting the proteins into smaller
peptides that are then analyzed generating MS/MS spectra. The
task of determining the identity of the peptide from its spectrum
is currently the weak point in the process. Current approaches to de
novo sequencing are able to compute candidate peptides efficiently.
The problem lies in the limitations of current scoring functions. In this
paper we introduce the concept of proteome signature. By examining
proteins and compiling proteome signatures (amino acid usage) it is
possible to characterize likely combinations of amino acids and better
distinguish between candidate peptides. Our results strongly support
the hypothesis that a scoring function that considers amino acid usage
patterns is better able to distinguish between candidate peptides. This
in turn leads to higher accuracy in peptide prediction.
Abstract: Bootstrapping has gained popularity in different tests of hypotheses as an alternative in using asymptotic distribution if one is not sure of the distribution of the test statistic under a null hypothesis. This method, in general, has two variants – the parametric and the nonparametric approaches. However, issues on reliability of this method always arise in many applications. This paper addresses the issue on reliability by establishing a reliability measure in terms of quantiles with respect to asymptotic distribution, when this is approximately correct. The test of hypotheses used is Ftest. The simulated results show that using nonparametric bootstrapping in F-test gives better reliability than parametric bootstrapping with relatively higher degrees of freedom.
Abstract: The counter flow solar air heaters, with four
transverse fins and wire mesh layers are constructed and investigated
experimentally for thermal efficiency at a geographic location of
Cyprus in the city of Famagusta. The absorber plate is replaced by
sixteen steel wire mesh layers, 0.18 x 0.18cm in cross section
opening and a 0.02cm in diameter. The wire mesh layers arranged in
three groups, first and second include 6 layers, while the third include
4 layers. All layers fixed in the duct parallel to the glazing and each
group separated from the others by wood frame thickness of 0.5cm to
reduce the pressure drop. The transverse fins arranged in a way to
force the air to flow through the bed like eight letter path with flow
depth 3cm. The proposed design has increased the heat transfer rate,
but on other hand causes a high pressure drop. The obtained results
show that, for air mass flow rate range between 0.011-0.036kg/s, the
thermal efficiency increases with increasing the air mass flow. The
maximum efficiency obtained is 65.6% for the mass flow rate of
0.036kg/s. Moreover, the temperature difference between the outlet
flow and the ambient temperature, ΔT, reduces as the air mass flow
rate increase. The maximum difference between the outlet and
ambient temperature obtained was 43°C for double pass for minimum
mass flow rate of 0.011kg/s. Comparison with a conventional solar
air heater collector shows a significantly development in the thermal
efficiency.
Abstract: Recordings from recent earthquakes have provided evidence that ground motions in the near field of a rupturing fault differ from ordinary ground motions, as they can contain a large energy, or “directivity" pulse. This pulse can cause considerable damage during an earthquake, especially to structures with natural periods close to those of the pulse. Failures of modern engineered structures observed within the near-fault region in recent earthquakes have revealed the vulnerability of existing RC buildings against pulse-type ground motions. This may be due to the fact that these modern structures had been designed primarily using the design spectra of available standards, which have been developed using stochastic processes with relatively long duration that characterizes more distant ground motions. Many recently designed and constructed buildings may therefore require strengthening in order to perform well when subjected to near-fault ground motions. Fiber Reinforced Polymers are considered to be a viable alternative, due to their relatively easy and quick installation, low life cycle costs and zero maintenance requirements. The objective of this paper is to investigate the adequacy of Artificial Neural Networks (ANN) to determine the three dimensional dynamic response of FRP strengthened RC buildings under the near-fault ground motions. For this purpose, one ANN model is proposed to estimate the base shear force, base bending moments and roof displacement of buildings in two directions. A training set of 168 and a validation set of 21 buildings are produced from FEA analysis results of the dynamic response of RC buildings under the near-fault earthquakes. It is demonstrated that the neural network based approach is highly successful in determining the response.
Abstract: The changing economic climate has made global
manufacturing a growing reality over the last decade, forcing
companies from east and west and all over the world to
collaborate beyond geographic boundaries in the design,
manufacture and assemble of products. The ISO10303 and
ISO14649 Standards (STEP and STEP-NC) have been
developed to introduce interoperability into manufacturing
enterprises so as to meet the challenge of responding to
production on demand. This paper describes and illustrates a
STEP compliant CAD/CAPP/CAM System for the manufacture
of rotational parts on CNC turning centers. The information
models to support the proposed system together with the data
models defined in the ISO14649 standard used to create the NC
programs are also described. A structured view of a STEP
compliant CAD/CAPP/CAM system framework supporting the
next generation of intelligent CNC controllers for turn/mill
component manufacture is provided. Finally a proposed
computational environment for a STEP-NC compliant system
for turning operations (SCSTO) is described. SCSTO is the
experimental part of the research supported by the specification
of information models and constructed using a structured
methodology and object-oriented methods. SCSTO was
developed to generate a Part 21 file based on machining
features to support the interactive generation of process plans
utilizing feature extraction. A case study component has been
developed to prove the concept for using the milling and turning
parts of ISO14649 to provide a turn-mill CAD/CAPP/CAM
environment.
Abstract: The demand on High voltage (HV) infrastructures is growing due to the corresponding growth in industries and population. New or upgraded HV infrastructure has safety implications since Transmission mains usually occupy the same easement in the vicinity of neighbouring residents. Transmission mains consist of underground (UG) and overhead (OH) sections and the transition between the UG and OH section is known as the UGOH pole. The existence of two transmission mains in the same easement can dictate to resort to more complicated earthing design in order to mitigate the effect of AC interference, and in some cases it can also necessitates completing a Split Study of the system. This paper provides an overview of the AC interference, Split Study and the earthing of an underground feeder including the UGOH pole .In addition, this paper discusses the use of different link boxes on the UG feeder and presents a case study that represent a clear example of the Ac interference and Split factor. Finally, a few recommendations are provided to achieve a safety zone in the area beyond the boundary of the HV system.
Abstract: As a multicultural country, Indonesia has many subcultures
with unique performing arts. Some of them are well-known
to international tourists, such as music ensemble (known as gamelan)
in Bali and Java, shadow puppet play (wayang) in Java, and martial
arts (known as pencak silat) in Sumatra. Some examples of famous
traditional dances in Indonesia are Srimpi from Yogyakarta and Solo,
Legong from Bali, and Gong dance from Kalimantan. Performing arts
show the identity of a nation. However, they are a complex subject,
especially when they are addressed to children. The performing arts,
e.g. music, dance theatre, and opera are experiential, experimental,
and emotionally charged. Therefore, the right strategy and promotion
need to be developed to engage children to appreciate and preserve
traditional dances. This study aims to explore and identify
possibilities of internet usage as a medium to promote traditional
dances, especially to children in Indonesia.
Abstract: Decision Support System (DSS) are interactive
software systems that are built to assist the management of an
organization in the decision making process when faced with nonroutine
problems in a specific application domain. Non-functional
requirements (NFRs) for a DSS deal with the desirable qualities and
restrictions that the DSS functionalities must satisfy. Unlike the
functional requirements, which are tangible functionalities provided
by the DSS, NFRs are often hidden and transparent to DSS users but
affect the quality of the provided functionalities. NFRs are often
overlooked or added later to the system in an ad hoc manner, leading
to a poor overall quality of the system. In this paper, we discuss the
development of NFRs as part of the requirements engineering phase
of the system development life cycle of DSSs. To help eliciting
NFRs, we provide a comprehensive taxonomy of NFRs for DSSs.
Abstract: The performance of modified Fenton (MF) treatment
to promote PAH oxidation in artificially contaminated soil was
investigated in packed soil column with a hydrogen peroxide (H2O2)
delivery system simulating in situ injection. Soil samples were spiked
with phenanthrene (low molecular weight PAH) and fluoranthene
(high molecular weight PAH) to an initial concentration of 500
mg/kg dried soil each. The effectiveness of process parameters
H2O2/soil, iron/soil, chelating agent/soil weight ratios and reaction
time were studied using a 24 three level factorial design experiments.
Statistically significant quadratic models were developed using
Response Surface Methodology (RSM) for degrading PAHs from the
soil samples. Optimum operating condition was achieved at mild
range of H2O2/soil, iron/soil and chelating agent/soil weight ratios,
indicating cost efficient method for treating highly contaminated
lands.
Abstract: This paper presents the development of a hybrid
thermal model for the EVO Electric AFM 140 Axial Flux Permanent
Magnet (AFPM) machine as used in hybrid and electric vehicles. The
adopted approach is based on a hybrid lumped parameter and finite
difference method. The proposed method divides each motor
component into regular elements which are connected together in a
thermal resistance network representing all the physical connections
in all three dimensions. The element shape and size are chosen
according to the component geometry to ensure consistency. The
fluid domain is lumped into one region with averaged heat transfer
parameters connecting it to the solid domain. Some model parameters
are obtained from Computation Fluid Dynamic (CFD) simulation and
empirical data. The hybrid thermal model is described by a set of
coupled linear first order differential equations which is discretised
and solved iteratively to obtain the temperature profile. The
computation involved is low and thus the model is suitable for
transient temperature predictions. The maximum error in temperature
prediction is 3.4% and the mean error is consistently lower than the
mean error due to uncertainty in measurements. The details of the
model development, temperature predictions and suggestions for
design improvements are presented in this paper.
Abstract: This paper examines the role of telecommunications in sustainable development of urban, rural and remote communities in the Northern Territory of Australia through the theoretical lens of Social Capital. Social Capital is a relatively new construct and is rapidly gaining interest among policy makers, politicians and researchers as a means to both describe and understand social and economic development. Increasingly, the concept of Social Capital, as opposed to the traditional economic indicators, is seen as a more accurate measure of well-being. Whilst the essence of Social Capital is quality social relations, the concept intersects with telecommunications and Information Communications Technology (ICT) in a number of ways. The potential of ICT to disseminate information quickly, to reach vast numbers of people simultaneously and to include the previously excluded, is immense. However, the exact nature of the relationship is not clearly defined. This paper examines the nexus between social relations of mutual benefit, telecommunications access and sustainable development. A mixed methodological approach was used to test the hypothesis that No relationship exists between Social Capital and access to telecommunications services and facilities. Four communities, which included two urban, a rural and a remote Indigenous community in the Northern Territory of Australia are the focus of this research paper.
Abstract: Scheduling algorithm is a key technology in satellite
switching system with input-buffer. In this paper, a new scheduling
algorithm and its realization are proposed. Based on Crossbar
switching fabric, the algorithm adopts serial scheduling strategy and
adjusts the output port arbitrating strategy for the better equity of every
port. Consequently, it increases the matching probability. The
algorithm can greatly reduce the scheduling delay and cell loss rate.
The analysis and simulation results by OPNET show that the proposed
algorithm has the better performance than others in average delay and
cell loss rate, and has the equivalent complexity. On the basis of these
results, the hardware realization and simulation based on FPGA are
completed, which validate the feasibility of the new scheduling
algorithm.
Abstract: The primary objective of this research is to improve the flexural capacity of FRP strengthened RC Beam structures with Aluminum and Titanium laminates. FRP rupture of flexural strengthened RC beams using FRP plates generally occurs at the interface between FRP plate and the beam. Therefore, in order to prevent brittle rupture and improve the ductility of the system, this research was performed by using Aluminum and Titanium materials between the two different structural systems. The research also aims to provide various strengthening/retrofitting methods for RC beam structures and to conduct a preliminary analysis of the demands on the structural systems. This was achieved by estimation using the experimental data from this research to identify a flexural capacity for the systems. Ultimately, the preliminary analysis of current study showed that the flexural capacity and system demand ductility was significantly improved by the systems inserted with Aluminum and Titanium anchor plates. Further verification of the experimental research is currently on its way to develop a new or reliable design guideline to retrofit/strengthen the concrete-FRP structural system can be evaluated.
Abstract: To improve the dynamics response of the vehicle
passive suspension, a two-terminal mass is suggested to connect in
parallel with the suspension strut. Three performance criteria, tire grip,
ride comfort and suspension deflection, are taken into consideration to
optimize the suspension parameters. However, the three criteria are
conflicting and non-commensurable. For this reason, the Chebyshev
goal programming method is applied to find the best tradeoff among
the three objectives. A simulation case is presented to describe the
multi-objective optimization procedure. For comparison, the
Chebyshev method is also employed to optimize the design of a
conventional passive suspension. The effectiveness of the proposed
design method has been clearly demonstrated by the result. It is also
shown that the suspension with a two-terminal mass in parallel has
better performance in terms of the three objectives.
Abstract: In this paper, the authors present architecture of a multi agent consultation system for obesity related problems, which hybrid the technology of an expert system (ES) and an intelligent agent (IA). The strength of the ES which is capable of pulling the expert knowledge is consulted and presented to the end user via the autonomous and friendly pushing environment of the intelligent agent.
Abstract: Evolvable Hardware (EHW) has been regarded as adaptive system acquired by wide application market. Consumer market of any good requires diversity to satisfy consumers- preferences. Adaptation of EHW is a key technology that could provide individual approach to every particular user. This situation raises a question: how to set target for evolutionary algorithm? The existing techniques do not allow consumer to influence evolutionary process. Only designer at the moment is capable to influence the evolution. The proposed consumer-triggered evolution overcomes this problem by introducing new features to EHW that help adaptive system to obtain targets during consumer stage. Classification of EHW is given according to responsiveness, imitation of human behavior and target circuit response. Home intelligent water heating system is considered as an example.