Abstract: Prior to 1975, women in Laos suffered from having
reduced levels of power over decision-making in their families and in
their communities. This has had a negative impact on their ability to
develop their own identities. Their roles were identified as being
responsible for household activities and making preparations for their
marriage. Many women lost opportunities to get educated and access
the outdoor work that might have empowered them to improve their
situations. So far, no accurate figures of either emigrants or return
migrants have been compiled but it appears that most of them were
women, and it was women who most and more frequently remitted
money home. However, very few recent studies have addressed the
relationship between remittances and the roles of women in Laos.
This study, therefore, aims at redressing to some extent the
deficiencies in knowledge. Qualitative techniques were used to gather
data, including individual in-depth interviews and direct observation
in combination with the content analysis method. Forty women in
Vientiane Municipality and Savannakhet province were individually
interviewed. It was found that the monetary remittance was typically
used for family security and well-being; on fungible activities; on
economic and business activities; and on community development,
especially concerning hospitality and providing daily household
necessities. Remittances played important roles in improving many
respondents- livelihoods and positively changed their identities in
families and communities. Women became empowered as they were
able to start commercial businesses, rather than taking care of (just)
housework, children and elders. Interviews indicated that 92.5% of
the respondents their quality of lives improved, 90% felt happier in
their families and 82.5% felt conflicts in their families were reduced.
Abstract: This paper describes the design of a real-time audiorange
digital oscilloscope and its implementation in 90nm CMOS
FPGA platform. The design consists of sample and hold circuits,
A/D conversion, audio and video processing, on-chip RAM, clock
generation and control logic. The design of internal blocks and
modules in 90nm devices in an FPGA is elaborated. Also the key
features and their implementation algorithms are presented.
Finally, the timing waveforms and simulation results are put
forward.
Abstract: A combination of image fusion and quad tree decomposition method is used for detecting the sunspot trajectories in each month and computation of the latitudes of these trajectories in each solar hemisphere. Daily solar images taken with SOHO satellite are fused for each month and the result of fused image is decomposed with Quad Tree decomposition method in order to classifying the sunspot trajectories and then to achieve the precise information about latitudes of sunspot trajectories. Also with fusion we deduce some physical remarkable conclusions about sun magnetic fields behavior. Using quad tree decomposition we give information about the region on sun surface and the space angle that tremendous flares and hot plasma gases permeate interplanetary space and attack to satellites and human technical systems. Here sunspot images in June, July and August 2001 are used for studying and give a method to compute the latitude of sunspot trajectories in each month with sunspot images.
Abstract: More and more governments around the world are
introducing e-government as a means of reducing costs, improving
services, saving time and increasing effectiveness and efficiency in
the public sector Therefore e-government has been identified as one
of the top priorities for Saudi government and all its agencies.
However, the adoption of e-government is facing many challenges
and barriers such as technological, cultural, organizational, and social
issues which must be considered and treated carefully by any
government contemplating its adoption. This paper reports on a pilot
study amongst online (e-ready) citizens to identify the challenges and
barriers that affect the adoption of e-government services especially
from their perspective in Saudi society. Based on the analysis of data
collected from an online survey the researcher was able to identify
some of the important barriers and challenges from the e-ready
citizen perspective. As a result, this study has generated a list of
possible strategies to move towards successful adoption of egovernment
services in Saudi Arabia.
Abstract: In this work, we consider an application of neural networks in LD converter. Application of this approach assumes a reliable prediction of steel temperature and reduces a reblow ratio in steel work. It has been applied a conventional model to charge calculation, the obtained results by this technique are not always good, this is due to the process complexity. Difficulties are mainly generated by the noisy measurement and the process non linearities. Artificial Neural Networks (ANNs) have become a powerful tool for these complex applications. It is used a backpropagation algorithm to learn the neural nets. (ANNs) is used to predict the steel bath temperature in oxygen converter process for the end condition. This model has 11 inputs process variables and one output. The model was tested in steel work, the obtained results by neural approach are better than the conventional model.
Abstract: This paper presents the averaging model of a buck
converter derived from the generalized state-space averaging method.
The sliding mode control is used to regulate the output voltage of the
converter and taken into account in the model. The proposed model
requires the fast computational time compared with those of the full
topology model. The intensive time-domain simulations via the exact
topology model are used as the comparable model. The results show
that a good agreement between the proposed model and the switching
model is achieved in both transient and steady-state responses. The
reported model is suitable for the optimal controller design by using
the artificial intelligence techniques.
Abstract: It is important to predict yield in semiconductor test process in order to increase yield. In this study, yield prediction means finding out defective die, wafer or lot effectively. Semiconductor test process consists of some test steps and each test includes various test items. In other world, test data has a big and complicated characteristic. It also is disproportionably distributed as the number of data belonging to FAIL class is extremely low. For yield prediction, general data mining techniques have a limitation without any data preprocessing due to eigen properties of test data. Therefore, this study proposes an under-sampling method using support vector machine (SVM) to eliminate an imbalanced characteristic. For evaluating a performance, randomly under-sampling method is compared with the proposed method using actual semiconductor test data. As a result, sampling method using SVM is effective in generating robust model for yield prediction.
Abstract: Current advancements in nanotechnology are dependent on the capabilities that can enable nano-scientists to extend their eyes and hands into the nano-world. For this purpose, a haptics (devices capable of recreating tactile or force sensations) based system for AFM (Atomic Force Microscope) is proposed. The system enables the nano-scientists to touch and feel the sample surfaces, viewed through AFM, in order to provide them with better understanding of the physical properties of the surface, such as roughness, stiffness and shape of molecular architecture. At this stage, the proposed work uses of ine images produced using AFM and perform image analysis to create virtual surfaces suitable for haptics force analysis. The research work is in the process of extension from of ine to online process where interaction will be done directly on the material surface for realistic analysis.
Abstract: Multi-dimensional principal component analysis
(PCA) is the extension of the PCA, which is used widely as the
dimensionality reduction technique in multivariate data analysis, to
handle multi-dimensional data. To calculate the PCA the singular
value decomposition (SVD) is commonly employed by the reason of
its numerical stability. The multi-dimensional PCA can be calculated
by using the higher-order SVD (HOSVD), which is proposed by
Lathauwer et al., similarly with the case of ordinary PCA. In this
paper, we apply the multi-dimensional PCA to the multi-dimensional
medical data including the functional independence measure (FIM)
score, and describe the results of experimental analysis.
Abstract: The statistical process control (SPC) is one of the most powerful tools developed to assist ineffective control of quality, involves collecting, organizing and interpreting data during production. This article aims to show how the use of CEP industries can control and continuously improve product quality through monitoring of production that can detect deviations of parameters representing the process by reducing the amount of off-specification products and thus the costs of production. This study aimed to conduct a technological forecasting in order to characterize the research being done related to the CEP. The survey was conducted in the databases Spacenet, WIPO and the National Institute of Industrial Property (INPI). Among the largest are the United States depositors and deposits via PCT, the classification section that was presented in greater abundance to F.
Abstract: Several works regarding facial recognition have dealt with methods which identify isolated characteristics of the face or with templates which encompass several regions of it. In this paper a new technique which approaches the problem holistically dispensing with the need to identify geometrical characteristics or regions of the face is introduced. The characterization of a face is achieved by randomly sampling selected attributes of the pixels of its image. From this information we construct a set of data, which correspond to the values of low frequencies, gradient, entropy and another several characteristics of pixel of the image. Generating a set of “p" variables. The multivariate data set with different polynomials minimizing the data fitness error in the minimax sense (L∞ - Norm) is approximated. With the use of a Genetic Algorithm (GA) it is able to circumvent the problem of dimensionality inherent to higher degree polynomial approximations. The GA yields the degree and values of a set of coefficients of the polynomials approximating of the image of a face. By finding a family of characteristic polynomials from several variables (pixel characteristics) for each face (say Fi ) in the data base through a resampling process the system in use, is trained. A face (say F ) is recognized by finding its characteristic polynomials and using an AdaBoost Classifier from F -s polynomials to each of the Fi -s polynomials. The winner is the polynomial family closer to F -s corresponding to target face in data base.
Abstract: The issue of scientific – technological parks has been
proposed in several countries of the world especially in western
countries since a few decades ago and its efficiency is under
examination. In our county Iran, some scientific – technological
parks have been established or are being established. This design
would evaluate the urban role and method of architecture of these
parks in order to criticize its efficiency and offer some suggestions,
as much as possible to improve its building methods in Iran. The
main problem of this design is that how much these parks in Iran do
meet the international measurements. So for this reason, one
scientific park in Iran and one from western countries would be
studied and compared with each other.
Abstract: Webcam systems now function as the new privileged
vantage points from which to view the city. This transformation of
CCTV technology from surveillance to promotional tool is significant
because its'scopic regime' presents, back to the public, a new virtual
'site' that sits alongside its real-time counterpart. Significantly,
thisraw 'image' data can, in fact,be co-optedand processed so as to
disrupt their original purpose. This paper will demonstrate this
disruptive capacity through an architectural project. It will reveal how
the adaption the webcam image offers a technical springboard by
which to initiate alternate urban form making decisions and subvert
the disciplinary reliance on the 'flat' orthographic plan. In so doing,
the paper will show how this 'digital material' exceeds the imagistic
function of the image; shiftingit from being a vehicle of signification
to a site of affect.
Abstract: In this paper, acoustic techniques are used to detect hidden insect infestations of date palm tress (Phoenix dactylifera L.). In particular, we use an acoustic instrument for early discovery of the presence of a destructive insect pest commonly known as the Red Date Palm Weevil (RDPW) and scientifically as Rhynchophorus ferrugineus (Olivier). This type of insect attacks date palm tress and causes irreversible damages at late stages. As a result, the infected trees must be destroyed. Therefore, early presence detection is a major part in controlling the spread and economic damage caused by this type of infestation. Furthermore monitoring and early detection of the disease can asses in taking appropriate measures such as isolating or treating the infected trees. The acoustic system is evaluated in terms of its ability for early discovery of hidden bests inside the tested tree. When signal acquisitions is completed for a number of date palms, a signal processing technique known as time-frequency analysis is evaluated in terms of providing an estimate that can be visually used to recognize the acoustic signature of the RDPW. The testing instrument was tested in the laboratory first then; it was used on suspected or infested tress in the field. The final results indicate that the acoustic monitoring approach along with signal processing techniques are very promising for the early detection of presence of the larva as well as the adult pest in the date palms.
Abstract: Statistics indicate that more than 1000 phishing attacks are launched every month. With 57 million people hit by the fraud so far in America alone, how do we combat phishing?This publication aims to discuss strategies in the war against Phishing. This study is an examination of the analysis and critique found in the ways adopted at various levels to counter the crescendo of phishing attacks and new techniques being adopted for the same. An analysis of the measures taken up by the varied popular Mail servers and popular browsers is done under this study. This work intends to increase the understanding and awareness of the internet user across the globe and even discusses plausible countermeasures at the users as well as the developers end. This conceptual paper will contribute to future research on similar topics.
Abstract: Dust storms are one of the most costly and destructive
events in many desert regions. They can cause massive damages both
in natural environments and human lives. This paper is aimed at
presenting a preliminary study on dust storms, as a major natural
hazard in arid and semi-arid regions. As a case study, dust storm
events occurred in Zabol city located in Sistan Region of Iran was
analyzed to diagnose and predict dust storms. The identification and
prediction of dust storm events could have significant impacts on
damages reduction. Present models for this purpose are complicated
and not appropriate for many areas with poor-data environments. The
present study explores Gamma test for identifying inputs of ANNs
model, for dust storm prediction. Results indicate that more attempts
must be carried out concerning dust storms identification and
segregate between various dust storm types.
Abstract: The more recent satellite projects/programs makes
extensive usage of real – time embedded systems. 16 bit processors
which meet the Mil-Std-1750 standard architecture have been used in
on-board systems. Most of the Space Applications have been written
in ADA. From a futuristic point of view, 32 bit/ 64 bit processors are
needed in the area of spacecraft computing and therefore an effort is
desirable in the study and survey of 64 bit architectures for space
applications. This will also result in significant technology
development in terms of VLSI and software tools for ADA (as the
legacy code is in ADA).
There are several basic requirements for a special processor for
this purpose. They include Radiation Hardened (RadHard) devices,
very low power dissipation, compatibility with existing operational
systems, scalable architectures for higher computational needs,
reliability, higher memory and I/O bandwidth, predictability, realtime
operating system and manufacturability of such processors.
Further on, these may include selection of FPGA devices, selection
of EDA tool chains, design flow, partitioning of the design, pin
count, performance evaluation, timing analysis etc.
This project deals with a brief study of 32 and 64 bit processors
readily available in the market and designing/ fabricating a 64 bit
RISC processor named RISC MicroProcessor with added
functionalities of an extended double precision floating point unit
and a 32 bit signal processing unit acting as co-processors. In this
paper, we emphasize the ease and importance of using Open Core
(OpenSparc T1 Verilog RTL) and Open “Source" EDA tools such as
Icarus to develop FPGA based prototypes quickly. Commercial tools
such as Xilinx ISE for Synthesis are also used when appropriate.
Abstract: We address the balancing problem of transfer lines in
this paper to find the optimal line balancing that minimizes the nonproductive
time. We focus on the tool change time and face
orientation change time both of which influence the makespane. We
consider machine capacity limitations and technological constraints
associated with the manufacturing process of auto cylinder heads.
The problem is represented by a mixed integer programming model
that aims at distributing the design features to workstations and
sequencing the machining processes at a minimum non-productive
time. The proposed model is solved by an algorithm established using
linearization schemes and Benders- decomposition approach. The
experiments show the efficiency of the algorithm in reaching the
exact solution of small and medium problem instances at reasonable
time.
Abstract: Long terms variation of solar insolation had been
widely studied. However, its parallel observations in short time scale
is rather lacking. This paper aims to investigate the short time scale
evolution of solar radiation spectrum (UV, PAR, and NIR bands) due
to atmospheric aerosols and water vapors. A total of 25 days of
global and diffused solar spectrum ranges from air mass 2 to 6 were
collected using ground-based spectrometer with shadowband
technique. The result shows that variation of solar radiation is the
least in UV fraction, followed by PAR and the most in NIR. Broader
variations in PAR and NIR are associated with the short time scale
fluctuations of aerosol and water vapors. The corresponding daily
evolution of UV, PAR, and NIR fractions implies that aerosol and
water vapors variation could also be responsible for the deviation
pattern in the Langley-plot analysis.
Abstract: Clustering algorithms help to understand the hidden
information present in datasets. A dataset may contain intrinsic and
nested clusters, the detection of which is of utmost importance. This
paper presents a Distributed Grid-based Density Clustering algorithm
capable of identifying arbitrary shaped embedded clusters as well as
multi-density clusters over large spatial datasets. For handling
massive datasets, we implemented our method using a 'sharednothing'
architecture where multiple computers are interconnected
over a network. Experimental results are reported to establish the
superiority of the technique in terms of scale-up, speedup as well as
cluster quality.