Abstract: At very high speeds, bubbles form in the underwater vehicles because of sharp trailing edges or of places where the local pressure is lower than the vapor pressure. These bubbles are called cavities and the size of the cavities grows as the velocity increases. A properly designed cavitator can induce the formation of a single big cavity all over the vehicle. Such a vehicle travelling in the vaporous cavity is called a supercavitating vehicle and the present research work mainly focuses on the dynamic modeling of such vehicles. Cavitation of the fins is also accounted and the effect of the same on trajectory is well explained. The entire dynamics has been developed using the state space approach and emphasis is given on the effect of size and angle of attack of the cavitator. Control law has been established for the motion of the vehicle using Non-linear Dynamic Inverse (NDI) with cavitator as the control surface.
Abstract: Many states are now committed to implementing
international human rights standards domestically. In terms of
practical governance, how might effectiveness be measured? A facevalue
answer can be found in domestic laws and institutions relating
to human rights. However, this article provides two further tools to
help states assess their status on the spectrum of robust to fragile
human rights governance. The first recognises that each state has its
own 'human rights history' and the ideal end stage is robust human
rights governance, and the second is developing criteria to assess
robustness. Although a New Zealand case study is used to illustrate
these tools, the widespread adoption of human rights standards by
many states inevitably means that the issues are relevant to other
countries. This is even though there will always be varying degrees of
similarity-difference in constitutional background and developed or
emerging human rights systems.
Abstract: This paper proposes a new methodology for the
optimal allocation and sizing of Embedded Generation (EG)
employing Real Coded Genetic Algorithm (RCGA) to minimize the
total power losses and to improve voltage profiles in the radial
distribution networks. RCGA is a method that uses continuous
floating numbers as representation which is different from
conventional binary numbers. The RCGA is used as solution tool,
which can determine the optimal location and size of EG in radial
system simultaneously. This method is developed in MATLAB. The
effect of EG units- installation and their sizing to the distribution
networks are demonstrated using 24 bus system.
Abstract: This paper presents design trade-off and performance impacts of
the amount of pipeline phase of control path signals in a wormhole-switched
network-on-chip (NoC). The numbers of the pipeline phase of the control
path vary between two- and one-cycle pipeline phase. The control paths
consist of the routing request paths for output selection and the arbitration
paths for input selection. Data communications between on-chip routers are
implemented synchronously and for quality of service, the inter-router data
transports are controlled by using a link-level congestion control to avoid
lose of data because of an overflow. The trade-off between the area (logic
cell area) and the performance (bandwidth gain) of two proposed NoC router
microarchitectures are presented in this paper. The performance evaluation is
made by using a traffic scenario with different number of workloads under
2D mesh NoC topology using a static routing algorithm. By using a 130-nm
CMOS standard-cell technology, our NoC routers can be clocked at 1 GHz,
resulting in a high speed network link and high router bandwidth capacity
of about 320 Gbit/s. Based on our experiments, the amount of control path
pipeline stages gives more significant impact on the NoC performance than
the impact on the logic area of the NoC router.
Abstract: This paper focuses on the Mega-Sub Controlled
Structure Systems (MSCSS) performances and characteristics
regarding the new control principle contained in MSCSS subjected to
strong earthquake excitations. The adopted control scheme consists of
modulated sub-structures where the control action is achieved by
viscous dampers and sub-structure own configuration. The
elastic-plastic time history analysis under severe earthquake excitation
is analyzed base on the Finite Element Analysis Method (FEAM), and
some comparison results are also given in this paper. The result shows
that the MSCSS systems can remarkably reduce vibrations effects
more than the mega-sub structure (MSS). The study illustrates that the
improved MSCSS presents good seismic resistance ability even at 1.2g
and can absorb seismic energy in the structure, thus imply that
structural members cross section can be reduce and achieve to good
economic characteristics. Furthermore, the elasto-plastic analysis
demonstrates that the MSCSS is accurate enough regarding
international building evaluation and design codes. This paper also
shows that the elasto-plastic dynamic analysis method is a reasonable
and reliable analysis method for structures subjected to strong
earthquake excitations and that the computed results are more precise.
Abstract: This study presents the improvement of thermal
performance of heat pipe using copper nanofluid with aqueous
solution of n-Butanol. The nanofluids kept in the suspension of
conventional fluids have the potential of superior heat transfer
capability than the conventional fluids due to their improved thermal
conductivity. In this work, the copper nanofluid which has a 40 nm
size with a concentration of 100 mg/lit is kept in the suspension of
the de-ionized (DI) water and an aqueous solution of n-Butanol and
these fluids are used as a working medium in the heat pipe. The study
discusses about the effect of heat pipe inclination, type of working
fluid and heat input on the thermal efficiency and thermal resistance.
The experimental results are evaluated in terms of its performance
metrics and are compared with that of DI water.
Abstract: This study was designed to formulate,
pharmaceutically evaluate a topical skin-care cream (w/o emulsion)
of Aloe Vera versus its vehicle (Base) as control and determine their
effects on Stratum Corneum (SC) water content and Transepidermal
water loss (TEWL). Base containing no extract and a Formulation
containing 3% concentrated extract of Aloe Vera was developed by
entrapping in the inner aqueous phase of w/o emulsion (cream).
Lemon oil was incorporated to improve the odor. Both the Base and
Formulation were stored at 8°C ±0.1°C (in refrigerator), 25°C±0.1°C,
40°C±0.1°C and 40°C± 0.1°C with 75% RH (in incubator) for a
period of 4 weeks to predict their stability. The evaluation parameters
consisted of color, smell, type of emulsion, phase separation,
electrical conductivity, centrifugation, liquefaction and pH. Both the
Base and Formulation were applied to the cheeks of 21 healthy
human volunteers for a period of 8 weeks Stratum corneum (SC)
water content and Transepidermal water loss (TEWL) were
monitored every week to measure any effect produced by these
topical creams. The expected organoleptic stability of creams was
achieved from 4 weeks in-vitro study period. Odor was disappeared
with the passage of time due to volatilization of lemon oil. Both the
Base and Formulation produced significant (p≤0.05) changes in
TEWL with respect to time. SC water content was significantly
(p≤0.05) increased by the Formulation while the Base has
insignificant (p 0.05) effects on SC water content. The newly
formulated cream of Aloe Vera, applied is suitable for improvement
and quantitative monitoring of skin hydration level (SC water
content/ moisturizing effects) and reducing TEWL in people with dry
skin.
Abstract: Six parameters, the effective diffusivity (De),
activation energy of De, pre-exponential factor of De, amount
(ASOW) of self-organized water species, and amplitude (α) of the
forced oscillation of the molecular mobility (1/tC) derived from the
forced cyclic temperature change operation, were characterized by
using six typical foods, squid, sardines, scallops, salmon, beef, and
pork, as a function of the correlation time (tC) of the water molecule-s
proton retained in the foods. Each of the six parameters was clearly
divided into the water species A1 and A2 at a specified value of tC
=10-8s (=CtC), indicating an anomalous change in the physicochemical
nature of the water species at the CtC. The forced oscillation of 1/tC
clearly demonstrated a characteristic mode depending on the food
shown as a three dimensional map associated with 1/tC, the amount of
self-organized water, and tC.
Abstract: The environment pollution with pesticides and heavy
metals is a recognized problem nowadays, with extension to the
global scale the tendency of amplification. Even with all the progress
in the environmental field, both in the emphasize of the effect of the
pollutants upon health, the linked studies environment-health are
insufficient, not only in Romania but all over the world also. We aim
to describe the particular situation in Romania regarding the
uncontrolled use of pesticides, to identify and evaluate the risk zones
for health and the environment in Romania, with the final goal of
designing adequate programs for reduction and control of the risk
sources. An exploratory study was conducted to determine the
magnitude of the pesticide use problem in a population living in
Saliste, a rural setting in Transylvania, Romania. The significant
stakeholders in Saliste region were interviewed and a sample from
the population living in Saliste area was selected to fill in a designed
questionnaire. All the selected participants declared that they used
pesticides in their activities for more than one purpose. They
declared they annually applied pesticides for a period of time
between 11 and 30 years, from 5 to 9 days per year on average,
mainly on crops situated at some distance from the houses but high
risk behavior was identified as the volunteers declared the use of
pesticides in the backyard gardens, near their homes, where children
were playing. The pesticide applicators did not have the necessary
knowledge about safety and exposure. The health data must be
correlated with exposure biomarkers in attempt to identify the
possible health effects of the pesticides exposure. Future plans
include educational campaigns to raise the awareness of the
population on the danger of uncontrolled use of pesticides.
Abstract: For Romania, the fulfilment of the obligations
undertaken as a member state of the European Union in accordance
with the Treaty of Accession requires the effective implementation of
sustainable development principles and practices, this being the only
reasonable development option, which adequately draws in on the
economic, social and environment resources. Achieving this
objective is based on a profound analysis of the realities in the
Romanian economy, which will reflect the existent situation and the
action directions for the future. The paper presents an analysis of the
Romanian economic performances compared to the EU economy,
based on the sustainable value (SV) model. The analysis highlighted
the considerable gap between Romania and the EU regarding the
sustainable capitalization of resources, the provided information
being useful to justify strategic development decisions at a micro and
macro levels.
Abstract: Existing ground movement surveillance technologies
at airports are subjected to limitations due to shadowing effects or
multiple reflections. Therefore, there is a strong demand for a new
sensing technology, which will be cost effective and will provide
detection of non-cooperative targets under any weather conditions.
This paper aims to present a new intelligent system, developed
within the framework of the EC-funded ISMAEL project, which is
based on a new magnetic sensing technology and provides detection,
tracking and automatic classification of targets moving on the airport
surface. The system is currently being installed at two European
airports. Initial experimental results under real airport traffic
demonstrate the great potential of the proposed system.
Abstract: Increasing the demand for effectively use of the
production facility requires the tools for sharing the manufacturing
facility through remote operation of the machining process. This
research introduces the methodology of machining technology for
direct remote operation of networked milling machine. The
integrated tools with virtual simulation, remote desktop protocol and
Setup Free Attachment for remote operation of milling process are
proposed. Accessing and monitoring of machining operation is
performed by remote desktop interface and 3D virtual simulations.
Capability of remote operation is supported by an auto setup
attachment with a reconfigurable pin type setup free technology
installed on the table of CNC milling machine to perform unattended
machining process. The system is designed using a computer server
and connected to a PC based controlled CNC machine for real time
monitoring. A client will access the server through internet
communication and virtually simulate the machine activity. The
result has been presented that combination between real time virtual
simulation and remote desktop tool is enabling to operate all machine
tool functions and as well as workpiece setup..
Abstract: The 20th century has brought much development to the practice of Architecture worldwide, and technology has bridged inhabitation limits in many regions of the world with high levels of comfort and conveniences, most times at high costs to the environment. Throughout the globe, the tropical countries are being urbanized at an unprecedented rate and housing has become a major issue worldwide, in light of increased demand and lack of appropriate infra-structure and planning. Buildings and urban spaces designed in tropical cities have mainly adopted external concepts that in most cases do not fit the needs of the inhabitants living in such harsh climatic environment, and when they do, do so at high financial, environmental and cultural costs. Traditional architectural practices can provide valuable understanding on how self-reliance and autonomy of construction can be reinforced in rural-urban tropical environments. From traditional housing knowledge, it is possible to derive lessons for the development of new construction materials that are affordable, environmentally friendly, culturally acceptable and accesible to all.Specifically to the urban context, such solutions are of outmost importance, given the needs to a more democratic society, where access to housing is considered high in the agenda for development. Traditional or rural constructions are also ongoing through extensive changes eventhough they have mostly adopted climate-responsive building practices relying on local resources (with minimum embodied energy) and energy (for comfort and quality of life). It is important to note that many of these buildings can actually be called zero-energy, and hold potential answers to enable transition from high energy, high cost, low comfort urban habitations to zero/low energy habitations with high quality urban livelihood. Increasing access to modern urban lifestyels have also an effect on the aspirations from people in terms of performance, comfort and convenience in terms of their housing and the way it is produced and used. These aspirations are resulting in transitions from localresource dependent habitations- to non-local resource based highenergy urban style habitations. And such transitions are resulting in the habitations becoming increasingly unsuited to the local climatic conditions with increasing discomfort, ill-health, and increased CO2 emissions and local environmental disruption. This research studies one specific transition group in the context of 'water communities' in tropical-equatorial regions: Ribeirinhos housing typology (Amazonas, Brazil). The paper presents the results of a qualitative sustainability assessment of the housing typologies under transition, found at the Ribeirinhos communities.
Abstract: Graph has become increasingly important in modeling
complicated structures and schemaless data such as proteins, chemical
compounds, and XML documents. Given a graph query, it is desirable
to retrieve graphs quickly from a large database via graph-based
indices. Different from the existing methods, our approach, called
VFM (Vertex to Frequent Feature Mapping), makes use of vertices
and decision features as the basic indexing feature. VFM constructs
two mappings between vertices and frequent features to answer graph
queries. The VFM approach not only provides an elegant solution to
the graph indexing problem, but also demonstrates how database
indexing and query processing can benefit from data mining,
especially frequent pattern mining. The results show that the proposed
method not only avoids the enumeration method of getting subgraphs
of query graph, but also effectively reduces the subgraph isomorphism
tests between the query graph and graphs in candidate answer set in
verification stage.
Abstract: The calculation of buckling length factor (K) for steel
frames columns is a major and governing processes to determine the
dimensions steel frame columns cross sections during design. The
buckling length of steel frames columns has a direct effect on the cost
(weight) of using cross section. A new formula is required to
determine buckling length factor (K) by simplified way. In this
research a new formula for buckling length factor (K) was established
to determine by accurate method for a limited interval of columns
ends rigidity (GA, GB). The new formula can be used ease to
evaluate the buckling length factor without needing to complicated
equations or difficult charts.
Abstract: In this study concept of experimental design is
successfully applied for the determination of optimum condition to
produce PP/SWCNT (Polypropylene/Single wall carbon nanotube)
nanocomposite. Central composite design as one of experimental
design techniques is employed for the optimization and statistical
determination of the significant factors influencing on the tensile
modulus and yield stress as mechanical properties of this
nanocomposite. The significant factors are SWCNT weight fraction
and acid treatment time for functionalizing the nanoparticles.
Optimum conditions are in 0.7 % of SWCNT weight fraction and 210
min as acid treatment time for 1112.75 ± 28 MPa as maximum tensile
modulus and in 216 min and 0.65 % as acid treatment time and
SWCNT weight fraction respectively for 40.26 ± 0.3 MPa as
maximum yield stress. Also after setting new experiments for test
these optimum conditions, found excelent agreement with predicted
values.
Abstract: Virtual environment induces simulator sickness effect
for some users. The purpose of this research is to compare the
simulation sickness relative with parallax affect in one-screen and
three-screen HoloStageTM system, measured by Simulation Sickness
Questionnaire (SSQ). The results show the subjects tested in
three-screen has less sickness than one-screen and effect from the
Oculomotor (O) more than from the Disorientation (D) and more than
from the Nausea (N) or represented in O>D>N.
Abstract: This paper reports on a receding horizon filtering for
mobile robot systems with cross-correlated sensor noises and
uncertainties. Also, the effect of uncertain parameters in the state of
the tracking error model performance is considered. A distributed
fusion receding horizon filter is proposed. The distributed fusion
filtering algorithm represents the optimal linear combination of the
local filters under the minimum mean square error criterion. The
derivation of the error cross-covariances between the local receding
horizon filters is the key of this paper. Simulation results of the
tracking mobile robot-s motion demonstrate high accuracy and
computational efficiency of the distributed fusion receding horizon
filter.
Abstract: This research adapts experimental design to investigate
the effect of conditioning or not and pre-exposure or not on brand
attitude, so it is a 2×2=4 factorial design. The results show that the
brand attitude of conditioning group is significantly higher than that of
unconditioning group. The brand attitude with pre-exposure is
significantly higher than that without pre-exposure. Conditioning or
not and pre-exposure or not have significant interaction. No matter the
celebrity is pre-exposure or not, the brand attitude is higher under
conditioning process.
Abstract: This paper presents a systematic approach for the
design of power system stabilizer using genetic algorithm and
investigates the robustness of the GA based PSS. The proposed
approach employs GA search for optimal setting of PSS parameters.
The performance of the proposed GPSS under small and large
disturbances, loading conditions and system parameters is tested.
The eigenvalue analysis and nonlinear simulation results show the
effectiveness of the GPSS to damp out the system oscillations. It is
found tat the dynamic performance with the GPSS shows improved
results, over conventionally tuned PSS over a wide range of
operating conditions.