Abstract: This article focuses on upper-extremity musculoskeletal disorders risk assessment model at workplace. In this model are used risk factors that are responsible for musculoskeletal system damage. Based on statistic calculations the model is able to define what risk of MSD threatens workers who are under risk factors. The model is also able to say how MSD risk would decrease if these risk factors are eliminated.
Abstract: The biodegradable family of polymers
polyhydroxyalkanoates is an interesting substitute for convectional
fossil-based plastics. However, the manufacturing and environmental
impacts associated with their production via intracellular bacterial
fermentation are strongly dependent on the raw material used and on
energy consumption during the extraction process, limiting their
potential for commercialization. Industrial wastewater is studied in
this paper as a promising alternative feedstock for waste valorization.
Based on results from laboratory and pilot-scale experiments, a
conceptual process design, techno-economic analysis and life cycle
assessment are developed for the large-scale production of the most
common type of polyhydroxyalkanoate, polyhydroxbutyrate.
Intracellular polyhydroxybutyrate is obtained via fermentation of
microbial community present in industrial wastewater and the
downstream processing is based on chemical digestion with
surfactant and hypochlorite. The economic potential and
environmental performance results help identifying bottlenecks and
best opportunities to scale-up the process prior to industrial
implementation. The outcome of this research indicates that the
fermentation of wastewater towards PHB presents advantages
compared to traditional PHAs production from sugars because the
null environmental burdens and financial costs of the raw material in
the bioplastic production process. Nevertheless, process optimization
is still required to compete with the petrochemicals counterparts.
Abstract: Groundwater inflow to the tunnels is one of the most
important problems in tunneling operation. The objective of this
study is the investigation of model dimension effects on tunnel inflow
assessment in discontinuous rock masses using numerical modeling.
In the numerical simulation, the model dimension has an important
role in prediction of water inflow rate. When the model dimension is
very small, due to low distance to the tunnel border, the model
boundary conditions affect the estimated amount of groundwater flow
into the tunnel and results show a very high inflow to tunnel. Hence,
in this study, the two-dimensional universal distinct element code
(UDEC) used and the impact of different model parameters, such as
tunnel radius, joint spacing, horizontal and vertical model domain
extent has been evaluated. Results show that the model domain extent
is a function of the most significant parameters, which are tunnel
radius and joint spacing.
Abstract: This paper is a report on the findings of a study
conducted at the Institute of Public Administration (IPA) in Saudi
Arabia. The paper applied both qualitative and quantitative
approaches to assess the levels of basic computer applications’ skills
among students enrolled in the preparatory programs of the
institution. Qualitative data have been collected from semi-structured
interviews with the instructors who have previously been assigned to
teach Introduction to information technology courses. Quantitative
data were collected by executing a self-report questionnaire and a
written statistical test. Three hundred eighty enrolled students
responded to the questionnaire and one hundred forty two
accomplished the statistical test. The results indicate the lack of
necessary skills to deal with computer applications among most of
the students who are enrolled in the IPA’s preparatory programs.
Abstract: This article discusses ways to implement a
differentiated approach to developing academic motivation for
mathematical studies which relies on defining the primary structural
characteristics of motivation. The following characteristics are
considered: features of realization of cognitive activity, meaningmaking
characteristics, level of generalization and consistency of
knowledge acquired by personal experience. The assessment of the
present level of individual student understanding of each component
of academic motivation is the basis for defining the relevant
educational strategy for its further development.
Abstract: Most people today are aware that global climate
change is not just a scientific theory but also a fact with worldwide
consequences. Global climate change is due to rapid urbanization,
industrialization, high population growth and current vulnerability of
the climatic condition. Water is becoming scarce as a result of global
climate change. To mitigate the problem arising due to global climate
change and its drought effect, harvesting rainwater from green roofs,
an environmentally-friendly and versatile technology, is becoming
one of the best assessment criteria and gaining attention in Malaysia.
This paper addresses the sustainability of green roofs and examines
the quality of water harvested from green roofs in comparison to
rainwater. The factors that affect the quality of such water, taking
into account, for example, roofing materials, climatic conditions, the
frequency of rainfall frequency and the first flush. A green roof was
installed on the Humid Tropic Centre (HTC) is a place of the study
on monitoring program for urban Stormwater Management Manual
for Malaysia (MSMA), Eco-Hydrological Project in Kuala Lumpur,
and the rainwater was harvested and evaluated on the basis of four
parameters i.e., conductivity, dissolved oxygen (DO), pH and
temperature. These parameters were found to fall between Class I and
Class III of the Interim National Water Quality Standards (INWQS)
and the Water Quality Index (WQI). Some preliminary treatment
such as disinfection and filtration could likely to improve the value of
these parameters to class I. This review paper clearly indicates that
there is a need for more research to address other microbiological and
chemical quality parameters to ensure that the harvested water is
suitable for use potable water for domestic purposes. The change in
all physical, chemical and microbiological parameters with respect to
storage time will be a major focus of future studies in this field.
Abstract: This study aimed to identify the alignment of
understanding and assessment practices among secondary school
teachers. The study was carried out using quantitative descriptive
study. The sample consisted of 164 teachers who taught Form 1 and 2
from 11 secondary schools in the district of North Kinta, Perak,
Malaysia. Data were obtained from 164 respondents who answered
Expectation Alignment Understanding and Practices of School
Assessment (PEKDAPS) questionnaire. The data were analysed
using SPSS 17.0+. The Cronbach’s alpha value obtained through
PEKDAPS questionnaire pilot study was 0.86. The results showed
that teachers' performance in PEKDAPS based on the mean value
was less than 3, which means that perfect alignment does not occur
between the understanding and practices of school assessment. Two
major PEKDAPS sub-constructs of articulation across grade and age
and usability of the system were higher than the moderate alignment
of the understanding and practices of school assessment (Min=2.0).
The content focused of PEKDAPs sub-constructs which showed
lower than the moderate alignment of the understanding and practices
of school assessment (Min=2.0). Another two PEKDAPS subconstructs
of transparency and fairness and the pedagogical
implications showed moderate alignment (2.0). The implications of
the study is that teachers need to fully understand the importance of
alignment among components of assessment, learning and teaching
and learning objectives as strategies to achieve quality assessment
process.
Abstract: This paper discusses the design and analysis of a
hybrid PV-Fuel cell energy system destined to power a DC load. The
system is composed of a photovoltaic array, a fuel cell, an
electrolyzer and a hydrogen tank. HOMER software is used in this
study to calculate the optimum capacities of the power system
components that their combination allows an efficient use of solar
resource to cover the hourly load needs. The optimal system sizing
allows establishing the right balance between the daily electrical
energy produced by the power system and the daily electrical energy
consumed by the DC load using a 28 KW PV array, a 7.5 KW fuel
cell, a 40KW electrolyzer and a 270 Kg hydrogen tank. The variation
of powers involved into the DC bus of the hybrid PV-fuel cell system
has been computed and analyzed for each hour over one year: the
output powers of the PV array and the fuel cell, the input power of
the elctrolyzer system and the DC primary load. Equally, the annual
variation of stored hydrogen produced by the electrolyzer has been
assessed. The PV array contributes in the power system with 82%
whereas the fuel cell produces 18%. 38% of the total energy
consumption belongs to the DC primary load while the rest goes to
the electrolyzer.
Abstract: Urban Search and Rescue (USAR) is a functional
capability that has been developed to allow the United Kingdom Fire
and Rescue Service to deal with ‘major incidents’ primarily involving
structural collapse. The nature of the work undertaken by USAR
means that staying out of a damaged or collapsed building structure is
not usually an option for search and rescue personnel. As a result
there is always a risk that they themselves could become victims. For
this paper, a systematic and investigative review using desk research
was undertaken to explore the role which structural engineering can
play in assisting search and rescue personnel to conduct structural
assessments when in the field. The focus is on how search and rescue
personnel can assess damaged and collapsed building structures, not
just in terms of structural damage that may been countered, but also
in relation to structural stability. Natural disasters, accidental
emergencies, acts of terrorism and other extreme events can vary
significantly in nature and ferocity, and can cause a wide variety of
damage to building structures. It is not possible or, even realistic, to
provide search and rescue personnel with definitive guidelines and
procedures to assess damaged and collapsed building structures as
there are too many variables to consider. However, understanding
what implications damage may have upon the structural stability of a
building structure will enable search and rescue personnel to better judge
and quantify risk from a life-safety standpoint. It is intended that this
will allow search and rescue personnel to make informed decisions
and ensure every effort is made to mitigate risk, so that they
themselves do not become victims.
Abstract: The building sector is responsible, in many
industrialized countries, for about 40% of the total energy
requirements, so it seems necessary to devote some efforts in this
area in order to achieve a significant reduction of energy
consumption and of greenhouse gases emissions.
The paper presents a study aiming at providing a design
methodology able to identify the best configuration of the system
building/plant, from a technical, economic and environmentally point
of view.
Normally, the classical approach involves a building's energy
loads analysis under steady state conditions, and subsequent selection
of measures aimed at improving the energy performance, based on
previous experience made by architects and engineers in the design
team. Instead, the proposed approach uses a sequence of two wellknown
scientifically validated calculation methods (TRNSYS and
RETScreen), that allow quite a detailed feasibility analysis.
To assess the validity of the calculation model, an existing,
historical building in Central Italy, that will be the object of
restoration and preservative redevelopment, was selected as a casestudy.
The building is made of a basement and three floors, with a
total floor area of about 3,000 square meters.
The first step has been the determination of the heating and
cooling energy loads of the building in a dynamic regime by means,
which allows simulating the real energy needs of the building in
function of its use. Traditional methodologies, based as they are on
steady-state conditions, cannot faithfully reproduce the effects of
varying climatic conditions and of inertial properties of the structure.
With this model is possible to obtain quite accurate and reliable
results that allow identifying effective combinations building-HVAC
system.
The second step has consisted of using output data obtained as
input to the calculation model, which enables to compare different
system configurations from the energy, environmental and financial
point of view, with an analysis of investment, and operation and
maintenance costs, so allowing determining the economic benefit of
possible interventions.
The classical methodology often leads to the choice of
conventional plant systems, while our calculation model provides a
financial-economic assessment for innovative energy systems and
low environmental impact.
Computational analysis can help in the design phase, particularly
in the case of complex structures with centralized plant systems, by
comparing the data returned by the calculation model for different
design options.
Abstract: Despite the highly touted benefits, emerging
technologies have unleashed pervasive concerns regarding unintended
and unforeseen social impacts. Thus, those wishing to create safe and
socially acceptable products need to identify such side effects and
mitigate them prior to the market proliferation. Various methodologies
in the field of technology assessment (TA), namely Delphi, impact
assessment, and scenario planning, have been widely incorporated in
such a circumstance. However, literatures face a major limitation in
terms of sole reliance on participatory workshop activities. They
unfortunately missed out the availability of a massive untapped data
source of futuristic information flooding through the Internet. This
research thus seeks to gain insights into utilization of futuristic data,
future-oriented documents from the Internet, as a supplementary
method to generate social impact scenarios whilst capturing
perspectives of experts from a wide variety of disciplines. To this end,
network analysis is conducted based on the social keywords extracted
from the futuristic documents by text mining, which is then used as a
guide to produce a comprehensive set of detailed scenarios. Our
proposed approach facilitates harmonized depictions of possible
hazardous consequences of emerging technologies and thereby makes
decision makers more aware of, and responsive to, broad qualitative
uncertainties.
Abstract: One of the best examples, in evolution of the public
procurement, from post-soviet countries are reforms carried out in
Georgia, which brought them close to international standards of
procurement. In Georgia, public procurement legislation started
functioning short after gaining independence. The reform has passed
several stages and came in the form as it is today. It should also be
noted, that countries with economy in transition, including Georgia,
implemented all the reforms in public procurement based on
recommendations and support of World Bank, the United Nations
and other international organizations.
The aim of first adopted law was regulation of the procurement
process of budget-organizations, transparency and creation of
competitive environment for private companies to access state funds
legally. The priorities were identified quite clearly in the wording of
the law, but operation/function of this law could not be reached on its
level, because of some objective and subjective reasons. The high
level of corruption in all levels of governance can be considered as a
main obstacle reason and of course, it is natural, that it had direct
impact on the procurement process, as well as on transparency and
rational use of state funds. These circumstances were the reasons that
reforms in this sphere continued, to improve procurement process, in
particular, the first wave of reforms began after several years. Public
procurement agency carried out reform with World Bank with main
purpose of smartening the procurement legislation and its
harmonization with international treaties and agreements. Also with
the support of World Bank various activities were carried out to raise
awareness of participants involved in procurement system.
Further major changes in the legislation were filed bit later, which
was also directed towards the improvement and smarten of the
procurement process. The third wave of the reform more or less
guaranteed the transparency of the procurement process, which later
became the basis for the rational spending of state funds. The reform
of the procurement system completely changed the procedures.
Carried out reform in Georgia resulted in introducing new
electronic tendering system, which benefit the transparency of the
process, after this became the basis for the further development of a
competitive environment, which become a prerequisite for the state
rational spending. Increased number of supplier organizations
participating in the procurement process resulted in reduction of the
estimated cost and the actual cost.
Assessment of the reforms in Georgia in the field of public
procurement can be concluded, that proper regulation of the sector
and relevant policy may proceed to rational and transparent spending
of the budget from country’s state institutions. Also, the business
sector has the opportunity to work in competitive market conditions
and to make a preliminary analysis, which is a prerequisite for future
strategy and development.
Abstract: Pulmonary Function Tests are important non-invasive
diagnostic tests to assess respiratory impairments and provides
quantifiable measures of lung function. Spirometry is the most
frequently used measure of lung function and plays an essential role
in the diagnosis and management of pulmonary diseases. However,
the test requires considerable patient effort and cooperation,
markedly related to the age of patients resulting in incomplete data
sets. This paper presents, a nonlinear model built using Multivariate
adaptive regression splines and Random forest regression model to
predict the missing spirometric features. Random forest based feature
selection is used to enhance both the generalization capability and the
model interpretability. In the present study, flow-volume data are
recorded for N= 198 subjects. The ranked order of feature importance
index calculated by the random forests model shows that the
spirometric features FVC, FEF25, PEF, FEF25-75, FEF50 and the
demographic parameter height are the important descriptors. A
comparison of performance assessment of both models prove that, the
prediction ability of MARS with the `top two ranked features namely
the FVC and FEF25 is higher, yielding a model fit of R2= 0.96 and
R2= 0.99 for normal and abnormal subjects. The Root Mean Square
Error analysis of the RF model and the MARS model also shows that
the latter is capable of predicting the missing values of FEV1 with a
notably lower error value of 0.0191 (normal subjects) and 0.0106
(abnormal subjects) with the aforementioned input features. It is
concluded that combining feature selection with a prediction model
provides a minimum subset of predominant features to train the
model, as well as yielding better prediction performance. This
analysis can assist clinicians with a intelligence support system in the
medical diagnosis and improvement of clinical care.
Abstract: In the framework of the modernization of the city of
Constantine and in order to restore its status as a regional metropolis
introducing it into the network of cities international metropolises,
has major urban project was launched: project of modernization and
of metropolitanization of the city of Constantine.
Our research project focuses on the management of the project for
the modernization of the city of Constantine (PMMC) focusing on
the management of some aspects of the urban project whose
participation, with the objective assessment of the managerial
approach business.
In this contribution, we focus on two cases revealing taken into
account in our research work on the question of participation of
actors and their organizations. It is "the urban project of
modernization of Constantine" and the operation relating to "the
urban improvement in the city of the Brothers FERRAD in the
district of Zouaghi". This project and this operation with the objective
of improving the living conditions of citizens have faced several
challenges and obstacles that have been in major part the factors of its
failures.
Through this study, we examined the management process and the
mode of organization of the actors of the project as well as the level
of participation of the citizen to finally proposed managerial solutions
toconflict situations observed.
Abstract: Hurling a successful Construction and Demolition
Waste (C&DW) recycling operation around the globe is a challenge
today, predominantly because secondary materials markets are yet to
be integrated. Reducing, Reusing and recycling of (C&DW) have
been employed over the years, and various techniques have been
investigated. However, the economic and environmental viability of
its application seems limited. This paper discusses the costs and
benefits in using secondary materials and focus on investigating reuse
and recycling process for five major types of construction materials:
concrete, metal, wood, cardboard/paper and plasterboard. Data
obtained from demolition specialists and contractors are considered
and evaluated. The research paper found that construction material
recovery process fully incorporate a 3R’s principle contributing to
saving energy and natural resources. This scrutiny leads to the
empathy of grand challenges in construction material recovery
process. Recommendations to deepen material recovery process are
also discussed.
Abstract: The development of allometric models is crucial to
accurate forest biomass/carbon stock assessment. The aim of this
study was to develop a set of biomass prediction models that will
enable the determination of total tree aboveground biomass for
savannah woodland area in Niger State, Nigeria. Based on the data
collected through biometric measurements of 1816 trees and
destructive sampling of 36 trees, five species specific and one site
specific models were developed. The sample size was distributed
equally between the five most dominant species in the study site
(Vitellaria paradoxa, Irvingia gabonensis, Parkia biglobosa,
Anogeissus leiocarpus, Pterocarpus erinaceous). Firstly, the
equations were developed for five individual species. Secondly these
five species were mixed and were used to develop an allometric
equation of mixed species. Overall, there was a strong positive
relationship between total tree biomass and the stem diameter. The
coefficient of determination (R2 values) ranging from 0.93 to 0.99 P
< 0.001 were realised for the models; with considerable low standard
error of the estimates (SEE) which confirms that the total tree above
ground biomass has a significant relationship with the dbh. F-test
values for the biomass prediction models were also significant at p
Abstract: Multi-Level Inverter technology has been developed in the area of high-power medium-voltage energy scheme, because of their advantages such as devices of lower rating can be used thereby enabling the schemes to be used for high voltage applications. Reduced Total Harmonic Distortion (THD).Since the dv/dt is low; the Electromagnetic Interference from the scheme is low. To avoid the switching losses Lower switching frequencies can be used. In this paper present a survey of various topologies, control strategy and modulation techniques used by these inverters. Here the regenerative and superior topologies are also discussed.
Abstract: A new concept of response system is proposed for
filling the gap that exists in reducing vulnerability during immediate
response to natural disasters. Real Time Early Response Systems
(RTERSs) incorporate real time information as feedback data for
closing control loop and for generating real time situation assessment.
A review of the state of the art on works that fit the concept of
RTERS is presented, and it is found that they are mainly focused on
manmade disasters. At the same time, in response phase of natural
disaster management many works are involved in creating early
warning systems, but just few efforts have been put on deciding what
to do once an alarm is activated. In this context a RTERS arises as a
useful tool for supporting people in their decision making process
during natural disasters after an event is detected, and also as an
innovative context for applying well-known automation technologies
and automatic control concepts and tools.
Abstract: The elastic period has a primary role in the seismic
assessment of buildings. Reliable calculations and/or estimates of the
fundamental frequency of a building and its site are essential during
analysis and design process. Various code formulas based on
empirical data are generally used to estimate the fundamental
frequency of a structure. For existing structures, in addition to code
formulas and available analytical tools such as modal analyses,
various methods of testing including ambient and forced vibration
testing procedures may be used to determine dynamic characteristics.
In this study, the dynamic properties of the 32 buildings located in
the Madinah of Saudi Arabia were identified using ambient motions
recorded at several, spatially-distributed locations within each
building. Ambient vibration measurements of buildings have been
analyzed and the fundamental longitudinal and transverse periods for
all tested buildings are presented. The fundamental mode of vibration
has been compared in plots with codes formulae (Saudi Building
Code, EC8, and UBC1997). The results indicate that measured
periods of existing buildings are shorter than that given by most
empirical code formulas. Recommendations are given based on the
common design and construction practice in Madinah city.
Abstract: This study investigated some results of the use of
digital art tools by junior school children in order to discover if these
tools could promote artistic ability and creativity. The study considers
the ease of use and usefulness of the tools as well as how to assess
artwork produced by digital means. As the use of these tools is a
relatively new development in Art education, this study may help
educators in their choice of which tools to use and when to use them.
The study also aims to present a model for the assessment of
students’ artistic development and creativity by studying their artistic
activity. This model can help in determining differences in students’
creative ability and could be useful both for teachers, as a means of
assessing digital artwork, and for students, by providing the
motivation to use the tools to their fullest extent. Sixteen students
aged nine to ten years old were observed and recorded while they
used the digital drawing tools. The study found that, according to the
students’ own statements, it was not the ease of use but the successful
effects the tools provided which motivated the children to use them.