Abstract: An immunomodulator bioproduct is prepared in a
batch bioprocess with a modified bacterium Pseudomonas
aeruginosa. The bioprocess is performed in 100 L Bioengineering
bioreactor with 42 L cultivation medium made of peptone, meat
extract and sodium chloride. The optimal bioprocess parameters were
determined: temperature – 37 0C, agitation speed - 300 rpm, aeration
rate – 40 L/min, pressure – 0.5 bar, Dow Corning Antifoam M-max.
4 % of the medium volume, duration - 6 hours. This kind of
bioprocesses are appreciated as difficult to control because their
dynamic behavior is highly nonlinear and time varying. The aim of
the paper is to present (by comparison) different models based on
experimental data.
The analysis criteria were modeling error and convergence rate.
The estimated values and the modeling analysis were done by using
the Table Curve 2D.
The preliminary conclusions indicate Andrews-s model with a
maximum specific growth rate of the bacterium in the range of
0.8 h-1.
Abstract: Housing is a basic human right. The provision of new
house shall be free from any defects, even for the defects that people
do normally considered as 'cosmetic defects'. This paper studies
about the building defects of newly completed house of 72 unit of
double-storey terraced located in Bangi, Selangor. The building
survey implemented using protocol 1 (visual inspection). As for new
house, the survey work is very stringent in determining the defects
condition and priority. Survey and reporting procedure is carried out
based on CSP1 Matrix that involved scoring system, photographs and
plan tagging. The analysis is done using Statistical Package for Social
Sciences (SPSS). The finding reveals that there are 2119 defects
recorded in 72 terraced houses. The cumulative score obtained was
27644 while the overall rating is 13.05. These results indicate that the
construction quality of the newly terraced houses is low and not up to
an acceptable standard as the new house should be.
Abstract: The organic farmers use wider range of crop varieties than the conventional farming. Bread wheat is the most favorite and the most common food crop. The organic bread wheat is usually of worse technological quality. Therefore, it is supposed to be an attractive alternative to the hulled wheat species (einkorn, emmer wheat and spelt). Twenty-five hulled bread wheat varieties and control bread wheat ones were grown on the certified organic parcel in České Budějovice (the Czech Republic) between 2009 and 2012. Their baking quality was measured and evaluated with standard methods, and in accordance with ICC. The results have shown that the grain of hulled wheat varieties contain a lot of proteins in grains (up to 18 percent); even the organic hulled bread wheat varieties are characterized by such good baking quality. Einkorn and emmer wheat are of worse technological quality of proteins (low values of gluten index and Zeleny test), which is a disadvantage of these two wheat species. On the other hand, spelt wheat is of better technological quality and is similar to the control bread wheat varieties. Mixtures consisting of bread wheat, among others, are considered good alternatives; they may contribute to wider range of use of the hulled wheat species. It is one of the possibilities which may increase the proportion of proteins in bread wheat grains; the nutrition-rich hulled wheat grains may be also used in such way at the same time.
Abstract: Latvia is the fourth in the world by means of broadband internet speed. The total number of internet users in Latvia exceeds 70% of its population. The number of active mailboxes of the local internet e-mail service Inbox.lv accounts for 68% of the population and 97.6% of the total number of internet users. The Latvian portal Draugiem.lv is a phenomenon of social media, because 58.4 % of the population and 83.5% of internet users use it. A majority of Latvian company profiles are available on social networks, the most popular being Twitter.com. These and other parameters prove the fact consumers and companies are actively using the Internet.
However, after the authors in a number of studies analyzed how enterprises are employing the e-environment, namely, e-environment tools, they arrived to the conclusions that are not as flattering as the aforementioned statistics. There is an obvious contradiction between the statistical data and the actual studies. As a result, the authors have posed a question: Why are entrepreneurs resistant to e-tools? In order to answer this question, the authors have addressed the Technology Acceptance Model (TAM). The authors analyzed each phase and determined several factors affecting the use of e-environment, reaching the main conclusion that entrepreneurs do not have a sufficient level of e-literacy (digital literacy).
The authors employ well-established quantitative and qualitative methods of research: grouping, analysis, statistic method, factor analysis in SPSS 20 environment etc.
The theoretical and methodological background of the research is formed by, scientific researches and publications, that from the mass media and professional literature, statistical information from legal institutions as well as information collected by the author during the survey.
Abstract: In this study, a minimal submaximal element of LIT(X) (the lattice of all intuitionistic topologies for X, ordered by inclusion) is determined. Afterwards, a new contractive property, intuitionistic mega-connectedness, is defined. We show that the submaximality and mega-connectedness are not complementary intuitionistic topological invariants by identifying those members of LIT(X) which are intuitionistic mega-connected.
Abstract: One of the difficulties of the vibration-based damage identification methods is the nonuniqueness of the results of damage identification. The different damage locations and severity may cause the identical response signal, which is even more severe for detection of the multiple damage. This paper proposes a new strategy for damage detection to avoid this nonuniqueness. This strategy firstly determines the approximates damage area based on the statistical pattern recognition method using the dynamic strain signal measured by the distributed fiber Bragg grating, and then accurately evaluates the damage information based on the Bayesian model updating method using the experimental modal data. The stochastic simulation method is then used to compute the high-dimensional integral in the Bayesian problem. Finally, an experiment of the plate structure, simulating one part of mechanical structure, is used to verify the effectiveness of this approach.
Abstract: Visualizing sound and noise often help us to determine
an appropriate control over the source localization. Near-field acoustic
holography (NAH) is a powerful tool for the ill-posed problem.
However, in practice, due to the small finite aperture size, the discrete
Fourier transform, FFT based NAH couldn-t predict the activeregion-
of-interest (AROI) over the edges of the plane. Theoretically
few approaches were proposed for solving finite aperture problem.
However most of these methods are not quite compatible for the
practical implementation, especially near the edge of the source. In
this paper, a zip-stuffing extrapolation approach has suggested with
2D Kaiser window. It is operated on wavenumber complex space
to localize the predicted sources. We numerically form a practice
environment with touch impact databases to test the localization of
sound source. It is observed that zip-stuffing aperture extrapolation
and 2D window with evanescent components provide more accuracy
especially in the small aperture and its derivatives.
Abstract: Water is the key of national development. Wherever a spring has been dried out or a river has changed its course, the area-s people have migrated and have been scattered and the area-s civilization has lost its brilliance. Today, air pollution, global warming and ozone layer damage are as the problems of countries, but certainly in the next decade the shortage and pollution of waters will be important issues of the world. The polluted waters are more dangerous in when they are used in agriculture. Because they infect plants and these plants are used in human and livestock consumption in food chain. With the increasing population growth and after that, the increase need to facilities and raw materials, human beings has started to do haste actions and wanted or unwanted destroyed his life basin. They try to overuse and capture his environment extremely, instead of having futurism approach in sustainable use of nature. This process includes Zayanderood recession, and caused its pollution after the transition from industrial and urban areas. Zayandehrood River in Isfahan is a vital artery of a living ecosystem. Now is the location of disposal waste water of many cities, villages and existing industries. The central area of the province is an important industrial place, and its environmental situation has reached a critical stage. Not only a large number of pollution-generating industries are active in the city limits, but outside of the city and adjacent districts Zayandehrood River, heavy industries like steel, Mobarakeh Steel and other tens great units pollute wild life. This article tries to study contaminant sources of Zayanderood and their severity, and determine and discuss the share of each of these resources by major industrial centers located in areas. At the end, we represent suitable strategy.
Abstract: Data Mining aims at discovering knowledge out of
data and presenting it in a form that is easily comprehensible to
humans. One of the useful applications in Egypt is the Cancer
management, especially the management of Acute Lymphoblastic
Leukemia or ALL, which is the most common type of cancer in
children.
This paper discusses the process of designing a prototype that can
help in the management of childhood ALL, which has a great
significance in the health care field. Besides, it has a social impact
on decreasing the rate of infection in children in Egypt. It also
provides valubale information about the distribution and
segmentation of ALL in Egypt, which may be linked to the possible
risk factors.
Undirected Knowledge Discovery is used since, in the case of this
research project, there is no target field as the data provided is
mainly subjective. This is done in order to quantify the subjective
variables. Therefore, the computer will be asked to identify
significant patterns in the provided medical data about ALL. This
may be achieved through collecting the data necessary for the
system, determimng the data mining technique to be used for the
system, and choosing the most suitable implementation tool for the
domain.
The research makes use of a data mining tool, Clementine, so as to
apply Decision Trees technique. We feed it with data extracted from
real-life cases taken from specialized Cancer Institutes. Relevant
medical cases details such as patient medical history and diagnosis
are analyzed, classified, and clustered in order to improve the disease
management.
Abstract: Medical Surgical Nursing is one of the major subjects
in nursing. This study examined the validity and reliability of the
achievement examination utilizing the Classical Test Theory and
Item Response Theory. The study answered the following objectives
specifically : ( a) To establish the validity and reliability of the
achievement examination utilizing Classical Test Theory and Item
Response Theory ; ( b ) To determine the dimensionality measure of
items and ( c ) to compare the item difficulty and item discrimination
of the Medical Surgical Nursing Achievement examination using
Classical Test Theory ( CTT ) and Item Response Theory ( IRT ).
The developed instrument was administered to fourth year nursing
students (N= 136) of a private university in Manila. The findings
yielded the following results: The achievement examination is
reliable both using CTT and IRT. The findings indicate person and
item statistics from two frameworks are quite alike. The achievement
examination formed a unidimensional construct.
Abstract: Natural frequencies and dynamic response of a spur
gear sector are investigated using a two dimensional finite element
model that offers significant advantages for dynamic gear analyses.
The gear teeth are analyzed for different operating speeds. A primary
feature of this modeling is determination of mesh forces using a
detailed contact analysis for each time step as the gears roll through
the mesh. ANSYS software has been used on the proposed model to
find the natural frequencies by Block Lanczos technique and
displacements and dynamic stresses by transient mode super position
method. The effect of rotational speed of the gear on the dynamic
response of gear tooth has been studied and design limits have been
discussed.
Abstract: Semantic Web Technologies enable machines to
interpret data published in a machine-interpretable form on the web.
At the present time, only human beings are able to understand the
product information published online. The emerging semantic Web
technologies have the potential to deeply influence the further
development of the Internet Economy. In this paper we propose a
scenario based research approach to predict the effects of these new
technologies on electronic markets and business models of traders
and intermediaries and customers. Over 300 million searches are
conducted everyday on the Internet by people trying to find what
they need. A majority of these searches are in the domain of
consumer ecommerce, where a web user is looking for something to
buy. This represents a huge cost in terms of people hours and an
enormous drain of resources. Agent enabled semantic search will
have a dramatic impact on the precision of these searches. It will
reduce and possibly eliminate information asymmetry where a better
informed buyer gets the best value. By impacting this key
determinant of market prices semantic web will foster the evolution
of different business and economic models. We submit that there is a
need for developing these futuristic models based on our current
understanding of e-commerce models and nascent semantic web
technologies. We believe these business models will encourage
mainstream web developers and businesses to join the “semantic web
revolution."
Abstract: In this paper, we explore the applicability of the Sinc-
Collocation method to a three-dimensional (3D) oceanography model.
The model describes a wind-driven current with depth-dependent
eddy viscosity in the complex-velocity system. In general, the
Sinc-based methods excel over other traditional numerical methods
due to their exponentially decaying errors, rapid convergence and
handling problems in the presence of singularities in end-points.
Together with these advantages, the Sinc-Collocation approach that
we utilize exploits first derivative interpolation, whose integration
is much less sensitive to numerical errors. We bring up several
model problems to prove the accuracy, stability, and computational
efficiency of the method. The approximate solutions determined by
the Sinc-Collocation technique are compared to exact solutions and
those obtained by the Sinc-Galerkin approach in earlier studies. Our
findings indicate that the Sinc-Collocation method outperforms other
Sinc-based methods in past studies.
Abstract: The identification and classification of the spine deformity play an important role when considering surgical planning for adolescent patients with idiopathic scoliosis. The subject of this article is the Lenke classification of scoliotic spines using Cobb angle measurements. The purpose is two-fold: (1) design a rulebased diagram to assist clinicians in the classification process and (2) investigate a computer classifier which improves the classification time and accuracy. The rule-based diagram efficiency was evaluated in a series of scoliotic classifications by 10 clinicians. The computer classifier was tested on a radiographic measurement database of 603 patients. Classification accuracy was 93% using the rule-based diagram and 99% for the computer classifier. Both the computer classifier and the rule based diagram can efficiently assist clinicians in their Lenke classification of spine scoliosis.
Abstract: Green house effect has becomes a serious concern in
many countries due to the increase consumption of the fossil fuel.
There have been many studies to find an alternative power source.
Wind energy found to be one of the most useful solutions to help in
overcoming the air pollution and global. There is no agreed solution
to conversion of wind energy to electrical energy. In this paper, the
advantages of using a Switched Reluctance Generator (SRG) for
wind energy applications. The theoretical study of the self excitation
of a SRG and the determination of the variable parameters in a SRG
design are discussed. The design parameters for the maximum power
output of the SRG are computed using Matlab simulation. The
designs of the circuit to control the variable parameters in a SRG to
provide the maximum power output are also discussed.
Abstract: An experimental study of anaerobic treatment was performed by hybrid upflow anaerobic sludge blanket (HUASB) reactor to treat produced water (PW) of an onshore crude oil terminal (COD: 1597 mg/L, NH3-N: 14.7 mg/L, phenol: 13.8 mg/L, BOD5: 862 mg/L, sodium: 6240 mg/L and chloride 9530 mg/L). The produced water with high salinity and other toxic substances will inhibit the methanogens performance if there is no adaptation on biomass before anaerobic digestion. COD removal from produced water was investigated at five different dilutions of produced water and tap water (TW) without any nutrient addition and pre-treatment. The dilution ratios were 1PW:4TW, 2PW:3TW, 3PW:2TW, 4PW:1TW and 5PW:0TW. The reactor was evaluated at mesophilic operating condition (35 ± 2 °C) at 5 days of HRT for 250 days continuous feed. The average COD removals for 1PW:4TW, 2PW:3TW, 3PW:2TW, 4PW:1TW and 5PW:0TW were found to be approximately 76.1%, 73.8%, 70.3%, 46.3% and 61.82% respectively, with final average effluent COD of 123.7 mg/L, 240 mg/L, 294 mg/L, 589 mg/L and 738 mg/L, respectively.
Abstract: The increasing usage of antibiotics in the animal
farming industry is an emerging worldwide problem contributing to
the development of antibiotic resistance. The purpose of this work was
to investigate the prevalence and antibiotic resistance profile of
bacterial isolates collected from aquatic environments and meats in a
peri-urban community in Daejeon, Korea. In an antibacterial
susceptibility test, the bacterial isolates showed a high incidence of
resistance (~ 26.04 %) to cefazolin, tetracycline, gentamycin,
norfloxacin, erythromycin and vancomycin. The results from a test for
multiple antibiotic resistance indicated that the isolates were
displaying an approximately 5-fold increase in the incidence of
multiple antibiotic resistance to combinations of two different
antibiotics compared to combinations of three or more antibiotics.
Most of the isolates showed multi-antibiotic resistance, and the
resistance patterns were similar among the sampling groups.
Sequencing data analysis of 16S rRNA showed that most of the
resistant isolates appeared to be dominated by the classes
Betaproteobacteria and Gammaproteobacteria in the phylum
Proteobacteria.
Abstract: This paper aims to provide a conceptual framework to examine competitive disadvantage of banks that suffer from poor performance. Banks generate revenues mainly from the interest rate spread on taking deposits and making loans while collecting fees in the process. To maximize firm value, banks seek loan growth and expense control while managing risk associated with loans with respect to non-performing borrowers or narrowing interest spread between assets and liabilities. Competitive disadvantage refers to the failure to access imitable resources and to build managing capabilities to gain sustainable return given appropriate risk management. This paper proposes a four-quadrant framework of organizational typology is subsequently proposed to examine the features of competitive disadvantage in the banking sector. A resource configuration model, which is extracted from CAMEL indicators to examine the underlying features of bank failures.
Abstract: The aim of this paper is to determine the stress levels
at the end of a long slender shaft such as a drilling assembly used in
the oil or gas industry using a mathematical model in real-time. The
torsional deflection experienced by this type of drilling shaft (about 4
KM length and 20 cm diameter hollow shaft with a thickness of 1
cm) can only be determined using a distributed modeling technique.
The main objective of this project is to calculate angular velocity and
torque at the end of the shaft by TLM method and also analyzing of
the behavior of the system by transient response. The obtained result
is compared with lumped modeling technique the importance of these
results will be evident only after the mentioned comparison. Two
systems have different transient responses and in this project because
of the length of the shaft transient response is very important.
Abstract: This paper aims at developing a multilevel fuzzy
decision support model for urban rail transit planning schemes in
China under the background that China is presently experiencing an
unprecedented construction of urban rail transit. In this study, an
appropriate model using multilevel fuzzy comprehensive evaluation
method is developed. In the decision process, the followings are
considered as the influential objectives: traveler attraction,
environment protection, project feasibility and operation. In addition,
consistent matrix analysis method is used to determine the weights
between objectives and the weights between the objectives-
sub-indictors, which reduces the work caused by repeated
establishment of the decision matrix on the basis of ensuring the
consistency of decision matrix. The application results show that
multilevel fuzzy decision model can perfectly deal with the
multivariable and multilevel decision process, which is particularly
useful in the resolution of multilevel decision-making problem of
urban rail transit planning schemes.