Abstract: The paper discusses a 3D numerical solution of the inverse boundary problem for a continuous casting process of alloy. The main goal of the analysis presented within the paper was to estimate heat fluxes along the external surface of the ingot. The verified information on these fluxes was crucial for a good design of a mould, effective cooling system and generally the whole caster. In the study an enthalpy-porosity technique implemented in Fluent package was used for modeling the solidification process. In this method, the phase change interface was determined on the basis of the liquid fraction approach. In inverse procedure the sensitivity analysis was applied for retrieving boundary conditions. A comparison of the measured and retrieved values showed a high accuracy of the computations. Additionally, the influence of the accuracy of measurements on the estimated heat fluxes was also investigated.
Abstract: Thermo-chemical treatment (TCT) such as pyrolysis
is getting recognized as a valid route for (i) materials and valuable
products and petrochemicals recovery; (ii) waste recycling; and (iii)
elemental characterization. Pyrolysis is also receiving renewed
attention for its operational, economical and environmental
advantages. In this study, samples of polyethylene terephthalate
(PET) and polystyrene (PS) were pyrolysed in a microthermobalance
reactor (using a thermogravimetric-TGA setup). Both
polymers were prepared and conditioned prior to experimentation.
The main objective was to determine the kinetic parameters of the
depolymerization reactions that occur within the thermal degradation
process. Overall kinetic rate constants (ko) and activation energies
(Eo) were determined using the general kinetics theory (GKT)
method previously used by a number of authors. Fitted correlations
were found and validated using the GKT, errors were within ± 5%.
This study represents a fundamental step to pave the way towards the
development of scaling relationship for the investigation of larger
scale reactors relevant to industry.
Abstract: The phase diagrams and compositions of coexisting
phases have been determined for aqueous two-phase systems
containing poly(propylene glycol) with average molecular weight of
425 and sodium citrate at various pH of 3.93, 4.44, 4.6, 4.97, 5.1,
8.22. The effect of pH on the salting-out effect of poly (propylene
glycol) by sodium citrate has been studied. It was found that, an
increasing in pH caused the expansion of two-phase region.
Increasing pH also increases the concentration of PPG in the PPGrich
phase, while the salt-rich phase will be somewhat mole diluted.
Abstract: A fuzzy classifier using multiple ellipsoids approximating decision regions for classification is to be designed in this paper. An algorithm called Gustafson-Kessel algorithm (GKA) with an adaptive distance norm based on covariance matrices of prototype data points is adopted to learn the ellipsoids. GKA is able toadapt the distance norm to the underlying distribution of the prototypedata points except that the sizes of ellipsoids need to be determined a priori. To overcome GKA's inability to determine appropriate size ofellipsoid, the genetic algorithm (GA) is applied to learn the size ofellipsoid. With GA combined with GKA, it will be shown in this paper that the proposed method outperforms the benchmark algorithms as well as algorithms in the field.
Abstract: The elimination of ranitidine (a pharmaceutical
compound) has been carried out in the presence of UV-C radiation.
After some preliminary experiments, it has been experienced the no
influence of the gas nature (air or oxygen) bubbled in photolytic
experiments. From simple photolysis experiments the quantum yield
of this compound has been determined. Two photolytic
approximation has been used, the linear source emission in parallel
planes and the point source emission in spherical planes. The
quantum yield obtained was in the proximity of 0.05 mol Einstein-1
regardless of the method used. Addition of free radical promoters
(hydrogen peroxide) increases the ranitidine removal rate while the
use of photocatalysts (TiO2) negatively affects the process.
Abstract: In this study, the precision heading process of
spur gears has been investigated by means of numerical
analysis. The effect of some parameters such as teeth number
and module on the forming force and material flow were
presented. The simulation works were performed rigid-plastic
finite element method using DEFORM 3D software. In order
to validate the estimated numerical results, they were
compared with those obtained experimentally during heading
of spur gear using lead as a model material. Results showed
that the optimum number of gear teeth is between 10 to 20,
that is because of being the specific pressure in its minimum
value.
Abstract: A frequency grouping approach for multi-channel
instantaneous blind source separation (I-BSS) of convolutive
mixtures is proposed for a lower net residual inter-symbol
interference (ISI) and inter-channel interference (ICI) than the
conventional short-time Fourier transform (STFT) approach. Starting
in the time domain, STFTs are taken with overlapping windows to
convert the convolutive mixing problem into frequency domain
instantaneous mixing. Mixture samples at the same frequency but
from different STFT windows are grouped together forming unique
frequency groups.
The individual frequency group vectors are input to the I-BSS
algorithm of choice, from which the output samples are dispersed
back to their respective STFT windows. After applying the inverse
STFT, the resulting time domain signals are used to construct the
complete source estimates via the weighted overlap-add method
(WOLA). The proposed algorithm is tested for source deconvolution
given two mixtures, and simulated along with the STFT approach to
illustrate its superiority for fairly motionless sources.
Abstract: This article investigates a contribution of synthesized visual speech. Synthesis of visual speech expressed by a computer consists in an animation in particular movements of lips. Visual speech is also necessary part of the non-manual component of a sign language. Appropriate methodology is proposed to determine the quality and the accuracy of synthesized visual speech. Proposed methodology is inspected on Czech speech. Hence, this article presents a procedure of recording of speech data in order to set a synthesis system as well as to evaluate synthesized speech. Furthermore, one option of the evaluation process is elaborated in the form of a perceptual test. This test procedure is verified on the measured data with two settings of the synthesis system. The results of the perceptual test are presented as a statistically significant increase of intelligibility evoked by real and synthesized visual speech. Now, the aim is to show one part of evaluation process which leads to more comprehensive evaluation of the sign speech synthesis system.
Abstract: Since large power transformers are the most
expensive and strategically important components of any power
generator and transmission system, their reliability is crucially
important for the energy system operation. Also, Circuit breakers are
very important elements in the power transmission line so monitoring
the events gives a knowledgebase to determine time to the next
maintenance. This paper deals with the introduction of the
comparative method of the state estimation of transformers and
Circuit breakers using continuous monitoring of voltage, current.
This paper gives details a new method based on wavelet to apparatus
insulation monitoring. In this paper to insulation monitoring of
transformer, a new method based on wavelet transformation and
neutral point analysis is proposed. Using the EMTP tools, fault in
transformer winding and the detailed transformer winding model
were simulated. The current of neutral point of winding was analyzed
by wavelet transformation. It is shown that the neutral current of the
transformer winding has useful information about fault in insulation
of the transformer.
Abstract: A novel concept to balance and tradeoff between
make-to-stock and make-to-order has been hybrid MTS/MTO production context. One of the most important decisions involved in
the hybrid MTS/MTO environment is determining whether a product
is manufactured to stock, to order, or hybrid MTS/MTO strategy. In this paper, a model based on analytic network process is developed to tackle the addressed decision. Since the regarded decision deals with
the uncertainty and ambiguity of data as well as experts- and
managers- linguistic judgments, the proposed model is equipped with
fuzzy sets theory. An important attribute of the model is its generality due to diverse decision factors which are elicited from the
literature and developed by the authors. Finally, the model is validated by applying to a real case study to reveal how the proposed
model can actually be implemented.
Abstract: A spanning tree of a connected graph is a tree which
consists the set of vertices and some or perhaps all of the edges from
the connected graph. In this paper, a model for spanning tree
transformation of connected graphs into single-row networks, namely
Spanning Tree of Connected Graph Modeling (STCGM) will be
introduced. Path-Growing Tree-Forming algorithm applied with
Vertex-Prioritized is contained in the model to produce the spanning
tree from the connected graph. Paths are produced by Path-Growing
and they are combined into a spanning tree by Tree-Forming. The
spanning tree that is produced from the connected graph is then
transformed into single-row network using Tree Sequence Modeling
(TSM). Finally, the single-row routing problem is solved using a
method called Enhanced Simulated Annealing for Single-Row
Routing (ESSR).
Abstract: Location-based services (LBS) exploit the known
location of a user to provide services dependent on their geographic
context and personalized needs [1].
The development and arrival of broadband mobile data networks
supported with mobile terminals equipped with new location
technologies like GPS have finally created opportunities for
implementation of LBS applications. But, from the other side,
collecting location information data in general raises privacy
concerns.
This paper presents results from two surveys of LBS acceptance in
Croatia. The first survey was administered on 181 students, and the
second extended survey involved pattern of 180 Croatian citizens.
We developed questionnaire which consists of descriptions of 15
different applications with scale which measures perceptions and
attitudes of users towards these applications.
We report the results to identify potential commercial applications
for LBS in B2C segment. Our findings suggest that some types of
applications like emergency&safety services and navigation have
significantly higher rate of acceptance than other types.
Abstract: In China, with the rapid urbanization and
industrialization, and highly accelerated economic development have
resulted in degradation of water resource. The water quality
deterioration usual result from eutrophication in most cases, so how to
dispose this type pollution water higher efficiently is an urgent task.
Hower, different with traditional technology, constructed wetlands are
effective treatment systems that can be very useful because they are
simple technology and low operational cost. A pilot-scale treatment
including constructed wetlands was constructed at XingYun Lake,
Yuxi, China, and operated as primary treatment measure before
eutrophic-lake water draining to riverine landscape. Water quality
indices were determined during the experiment, the results indicated
that treatment removal efficiencies were high for Nitrate nitrogen,
Chlorophyll–a and Algae, the final removal efficiency reached to
95.20%, 93.33% and 99.87% respectively, but the removal efficiency
of Total phosphorous and Total nitrogen only reach to 68.83% and
50.00% respectively.
Abstract: For a generalized Hermite sinosiodal / hyperbolic Gaussian beam passing through an ABCD system with a finite aperture, the propagation properties are derived using the Collins integral. The results are obtained in the form of intensity graphs indicating that previously demonstrated rules of reciprocity are applicable, while the existence of the aperture accelerates this transformation.
Abstract: The problem addressed herein is the efficient management of the Grid/Cluster intense computation involved, when the preconditioned Bi-CGSTAB Krylov method is employed for the iterative solution of the large and sparse linear system arising from the discretization of the Modified Helmholtz-Dirichlet problem by the Hermite Collocation method. Taking advantage of the Collocation ma-trix's red-black ordered structure we organize efficiently the whole computation and map it on a pipeline architecture with master-slave communication. Implementation, through MPI programming tools, is realized on a SUN V240 cluster, inter-connected through a 100Mbps and 1Gbps ethernet network,and its performance is presented by speedup measurements included.
Abstract: The present paper discusses the selection of process
parameters for obtaining optimal nanocrystallites size in the CuOZrO2
catalyst. There are some parameters changing the inorganic
structure which have an influence on the role of hydrolysis and
condensation reaction. A statistical design test method is
implemented in order to optimize the experimental conditions of
CuO-ZrO2 nanoparticles preparation. This method is applied for the
experiments and L16 orthogonal array standard. The crystallites size
is considered as an index. This index will be used for the analysis in
the condition where the parameters vary. The effect of pH, H2O/
precursor molar ratio (R), time and temperature of calcination,
chelating agent and alcohol volume are particularity investigated
among all other parameters. In accordance with the results of
Taguchi, it is found that temperature has the greatest impact on the
particle size. The pH and H2O/ precursor molar ratio have low
influences as compared with temperature. The alcohol volume as
well as the time has almost no effect as compared with all other
parameters. Temperature also has an influence on the morphology
and amorphous structure of zirconia. The optimal conditions are
determined by using Taguchi method. The nanocatalyst is studied by
DTA-TG, XRD, EDS, SEM and TEM. The results of this research
indicate that it is possible to vary the structure, morphology and
properties of the sol-gel by controlling the above-mentioned
parameters.
Abstract: Self-organizing map (SOM) is a well known data
reduction technique used in data mining. It can reveal structure in
data sets through data visualization that is otherwise hard to detect
from raw data alone. However, interpretation through visual
inspection is prone to errors and can be very tedious. There are
several techniques for the automatic detection of clusters of code
vectors found by SOM, but they generally do not take into account
the distribution of code vectors; this may lead to unsatisfactory
clustering and poor definition of cluster boundaries, particularly
where the density of data points is low. In this paper, we propose the
use of an adaptive heuristic particle swarm optimization (PSO)
algorithm for finding cluster boundaries directly from the code
vectors obtained from SOM. The application of our method to
several standard data sets demonstrates its feasibility. PSO algorithm
utilizes a so-called U-matrix of SOM to determine cluster boundaries;
the results of this novel automatic method compare very favorably to
boundary detection through traditional algorithms namely k-means
and hierarchical based approach which are normally used to interpret
the output of SOM.
Abstract: The present paper develops and validates a numerical procedure for the calculation of turbulent combustive flow in converging and diverging ducts and throuh simulation of the heat transfer processes, the amount of production and spread of Nox pollutant has been measured. A marching integration solution procedure employing the TDMA is used to solve the discretized equations. The turbulence model is the Prandtl Mixing Length method. Modeling the combustion process is done by the use of Arrhenius and Eddy Dissipation method. Thermal mechanism has been utilized for modeling the process of forming the nitrogen oxides. Finite difference method and Genmix numerical code are used for numerical solution of equations. Our results indicate the important influence of the limiting diverging angle of diffuser on the coefficient of recovering of pressure. Moreover, due to the intense dependence of Nox pollutant to the maximum temperature in the domain with this feature, the Nox pollutant amount is also in maximum level.
Abstract: This paper discusses a new, systematic approach to
the synthesis of a NP-hard class of non-regenerative Boolean
networks, described by FON[FOFF]={mi}[{Mi}], where for every
mj[Mj]∈{mi}[{Mi}], there exists another mk[Mk]∈{mi}[{Mi}], such
that their Hamming distance HD(mj, mk)=HD(Mj, Mk)=O(n), (where
'n' represents the number of distinct primary inputs). The method
automatically ensures exact minimization for certain important selfdual
functions with 2n-1 points in its one-set. The elements meant for
grouping are determined from a newly proposed weighted incidence
matrix. Then the binary value corresponding to the candidate pair is
correlated with the proposed binary value matrix to enable direct
synthesis. We recommend algebraic factorization operations as a post
processing step to enable reduction in literal count. The algorithm
can be implemented in any high level language and achieves best
cost optimization for the problem dealt with, irrespective of the
number of inputs. For other cases, the method is iterated to
subsequently reduce it to a problem of O(n-1), O(n-2),.... and then
solved. In addition, it leads to optimal results for problems exhibiting
higher degree of adjacency, with a different interpretation of the
heuristic, and the results are comparable with other methods.
In terms of literal cost, at the technology independent stage, the
circuits synthesized using our algorithm enabled net savings over
AOI (AND-OR-Invert) logic, AND-EXOR logic (EXOR Sum-of-
Products or ESOP forms) and AND-OR-EXOR logic by 45.57%,
41.78% and 41.78% respectively for the various problems.
Circuit level simulations were performed for a wide variety of
case studies at 3.3V and 2.5V supply to validate the performance of
the proposed method and the quality of the resulting synthesized
circuits at two different voltage corners. Power estimation was
carried out for a 0.35micron TSMC CMOS process technology. In
comparison with AOI logic, the proposed method enabled mean
savings in power by 42.46%. With respect to AND-EXOR logic, the
proposed method yielded power savings to the tune of 31.88%, while
in comparison with AND-OR-EXOR level networks; average power
savings of 33.23% was obtained.
Abstract: From past many decades human beings are suffering
from plethora of natural disasters. Occurrence of disasters is a
frequent process; it changes conceptual myths as more and more
advancement are made. Although we are living in technological era
but in developing countries like Pakistan disasters are shaped by
socially constructed roles. The need is to understand the most
vulnerable group of society i.e. females; their issues are complex in
nature because of undermined gender status in the society. There is a
need to identify maximum issues regarding females and to enhance
the achievement of millennium development goals (MDGs). Gender
issues are of great concern all around the globe including Pakistan.
Here female visibility in society is low, and also during disasters, the
failure to understand the reality that concentrates on double burden
including productive and reproductive care. Women have to
contribute a lot in society so we need to make them more disaster
resilient. For this non-structural measures like awareness, trainings
and education must be carried out. In rural and in urban settings in
any disaster like earthquake or flood, elements like gender
perspective, their age, physical health, demographic issues contribute
towards vulnerability. In Pakistan the gender issues in disasters were
of less concern before 2005 earthquake and 2010 floods. Significant
achievements are made after 2010 floods when gender and child cell
was created to provide all facilities to women and girls. The aim of
the study is to highlight all necessary facilities in a disaster to build
coping mechanism in females from basic rights till advance level
including education.